Philips 210 - Manuals

6 I NTRODUCTION English -Leave a minimum clearance of approx. 40 cm above and to the sides. The heat may not accumulate in the device! Otherwise the heat can damage the device, and there is fire hazard! - The device may not be installed close to inflammable material (e. g. curtains, flammable liquid...

G ETTING S TARTED 7 En glish Getting Started Remove your Digital Set Top Box carefully from the box, and remove the packaging from each part. In the Box You will find the following items: - Digital Set Top Box - Remote Control (AA batteries) - Power supply 230 V AC/50 Hz to 12 V DC - SCART-to-SCART ...

8 G ETTING S TARTED English Digital Set Top Box Front view Rear view Mains Adaptor The Remote Control Using the Remote Control To use the remote control, point it towards the front of the set top box. The remote control will not operate if its path is blocked. Warning: Sunlight or very bright light ...

G ETTING S TARTED 9 En glish Connecting Your Digital Set Top Box to other equipment The following diagrams are of typical configurations only, and may differ slightly to your existing external equipment. If you are unsure on how to connect to your set top box, always consult your manufacturer's user...

10 O PERATION English Operation Switch-on/switch-off Switch the receiver on by pressing the ON/OFF button (standby button) on the remote control and wait until you see the welcome image on your screen. The LED is off if the receiver is switched on. When you switch on your receiver for the first time...

O PERATION 11 En glish Change of channel You can change the channel in different ways: - By pressing the channel button + or - . - By pressing the arrow button or . - By pressing the Back / P<P button , you switch between the two last selected channels. - By selecting the channel directly via the...

12 O PERATION English How to use the options: 1 Call up the desired channel. 2 Press the I-II button for sound selection or the APP button for caption selection. - If a teletext is offered, you can call it up by using the TEXT button . - Via the OPT button you can also call up the options. - In case...

O PERATION 13 En glish Creating and Editing channel list Possibly the channel list may appear too complex to you or contain channels that you are not interested in watch-ing. Via the main menu, you can edit and create your own favourite list. 1 Press the MENU button. 2 Select the menu item Sort Chan...

14 O PERATION English 8 By using the arrow button or , choose whether - the channels found are to be added to the old list (standard setting), - the old channel list is to be overwritten,- the new found channels are to be discarded. 9 Then press the OK button . Expert scan mode This type of scan mod...

O PERATION 15 En glish Timer By means of the timer setting, you can switch your receiver on and off at a specific time, for instance, in order to allow for the recording with a video-tape recorder. The device then automatically switches on in the standby mode. If the device is already switched on, t...

O PERATION 17 En glish Settings 1 Press the MENU button to open the main menu. The menu item settings is highlighted by default. 2 Press OK . You'll receive the following screen: 3 By using the arrow button or , highlight the desired option and press the OK button in order to call it up. Note: In ei...

18 O PERATION English Automatic information banner At the start of a new programme, the information banner is automatically shown as a default. If you do not want this, select off . Note: This option is only available if the value set under "dis-play duration information banner“ is at least 4 se...

T ROUBLESHOOTING 19 En glish Troubleshooting If you experience an operating problem with your Digital Set Top Box, please refer to the trouble-shooting table below and then the notes that follow. If none of the above suggestions seem to work, try switching your Set Top Box off and then on again. If ...

20 T ECHNICAL D ATA English Technical Data General - DVB terrestrial Free-To-Air receiver compliant to EN 300 744 - VHF and UHF frequency range support - Video and Audio out via 2x SCART - Digital audio out - Fast channel search - Reed-Solomon decoding support (EN 300 744) - Automatic FEC selection ...