Philips 200 - Manuals

Table of contents V Using the call log 20 Using the Intercom 22 Internal an internal call 22 Using the babysit function 23 Operator prefix phonebook Storing prefixes 24 Using the prefix phonebook 25 Using the services Operator services 26 Caller identification 26 Operator message service 26 Call for...

Table of contents VI Using the ONIS Vox 200 answerphone (remote use) Changing the secret access code 38 Remote-accessing the answerphone 38 During remote accessing 39 Remote-activating the answerphone 39 Remotely-changing the outgoing message 39 Settings Adding another ONIS 200 handset to the base s...

Setting up the Setting up the ONIS 200 1 Installing the ONIS 200 Safety and Security Your DECT compliant ONIS 200 telephone draws on the latest technology to make it both easier andmore comfortable to use.The ONIS 200 consists of 2 parts: the BASE STATION (immobile), and one or more cordlessHANDSETS...

Setting up the ONIS 200 2 R03/AAA NiMh rechargeable batteries should beused as replacements. • Slide open the HANDSET battery cover in the direction indicated by the arrow. • Remove batteries. • Insert new batteries as indicated and replace the cover. • Place the HANDSET on the BASE STATION. Charge ...

Setting up the ONIS 200 3 Cleaning the ONIS 200 Use a cloth dampened with soapy water to clean the ONIS 200. Then wipewith a dry cloth. • Never use a solvent or household product. Clean your telephone regularly to keep it looking brand new. L IMPORTANT: Do not place your telephone in a place where i...

Setting up the ONIS 200 4 Handset display The display screen shows information using 3 lines of 16 characters and one line of 8 icons. The bottomline is used for function key wording.The date, time and handset name are displayed when in idle mode. Typical screen displays: * Check with your operator ...

Setting up the ONIS 200 5 General operating procedure MENUS: You can access the menus using the keys: • Use these keys to select menus shown at the bottom of the screen.E.g. On the idle screen, the available menus are| REDIAL and SHARED |. • Use the keys to scroll through menus not shown on screen. ...

Setting up the ONIS 200 6 Example of use On the idle screen, scroll through the list ofmenus and select | SETTINGS . Choose OK | to select the “Handset sounds” option. Scroll to “Int. ringer type”. Select OK |. Scroll to the ringer you want and select OK |. Press and hold . 6 5 4 3 2 1 The menu is n...

Setting up the ONIS 200 8 Battery performance The telephone will work for approximately 200 hours on standby mode and around 15 hours when in use.During a call, beeps will provide a warning whenonly a few seconds of battery charge remain.Communication will automatically be cut off atthis time. Recha...

Customising your Customising your ONIS 200 9 *Each time the key is pressed, the cursor moves one spacefrom the right to the left. Changing the date and time The ONIS 200 has a clock feature which displays the date and time on the idle screen and dates all calllog entries. L NOTE: If you have registe...

Customising your ONIS 200 10 Ext. ringer type: for all incomingcalls. Int. ringer type: for all intercomcalls. To cut off the ring, select theSilence option. The icon will appear. You will hear the selected ring. To cut off the ring, select theSilence option. To cut off the base station ring,select ...

Customising your ONIS 200 11 The screen contrast willimmediately be adjusted. Select | CORRECT to delete the characters you wish to change. Scroll to “Contrast” under the “HandsetSettings” heading in the “Settings” menu andselect OK |. Scroll to the chosen contrast and select OK |. 2 1 Scroll to “Ke...

Customising your ONIS 200 12 Caller id. BACK OK The screen shows whether or notthe selected service has beendeclared. Details of these services can befound on page 26. Declare service √ Non declared BACK OK Call forward Set! Total list of services available and those declared for use: Caller identif...

Customising your ONIS 200 13 Configuring the call log You can set the call log to record: - all calls, including those answered, - only unanswered calls, - only message service information and messages from your answerphone (ONIS Vox 200 only), - no calls (Onis 200 only). The call log is described o...

Customising your ONIS 200 14 VIP Function If you have registered with the caller identification service, your ONIS 200 can associate certain ringswith certain callers. These rings tell you who is calling even when you cannot see the screen of thetelephone. These VIP callers must be specified in your...

Using the telephone 15 Using the telephone The icon flashes if the line is busy . During a call, scroll with and , to access the available options, described in detail onthe following pages. You can still hear the caller. You can no longer hear thecaller, who will hear hold music . Making a call Dir...

Using the telephone 16 The number will be displayed onscreen. The RECORD | function allows you to store the numberin one of the phonebooks. The display shows the caller'snumber* or the name if listed inthe one of the phonebooks. Predialling the number before calling To check the number and, where ne...

Using the telephone 17 The icon is highlighted when the handset loudspeaker isin use. The last volume level selected issaved. The icon flashes when the base station loudspeaker is inuse. 3 levels are available. Using the loudspeakers Activating and deactivating the loudspeakers When using the teleph...

Using the telephone 18 The last number dialled isdisplayed. The phonebook contains the last5 numbers dialled from thathandset. The first name in the list (in alphabetical order) isdisplayed. If the selectedphonebook contains no entries,the screen will display “List empty!”. Creating and changing you...

Using the telephone 19 Select | CORRECT to delete a letter or press . Press and hold (1.5 seconds) toinclude a pause in the number . The entry type is only availablethrough the shared phonebook. The cursor is placed after thelast letter of the name. Use the keypad to enter the name: - Select the let...

Using the telephone 20 Making a call from your phonebooks Using the call log Your ONIS 200 has a call log, which can store up to 40 entries. Depending on the programmedconfiguration (see page 21), the call log can store:- answered calls,- unanswered calls,- message service information,- messages fro...

Using the telephone 21 Entry with message on your answerphone ( Log options When consulting log entries, select | OPTIONS to access the following functions: - Select DELETE | to delete the entry. - Select RECORD | to save the entry in one of your phonebooks*. - Select NUMBER | to display the telepho...

Using the telephone 22 Using the Intercom This function may only be used with an additional ONIS 200 handset. Your base station may be used with 8 HANDSETS. Intercom allows you to communicate internallybetween two handsets.In addition, if you have three or more handsets, external communication may t...

Using the telephone 23 Using the babysit function This function may only be used with an additional ONIS 200 handset. Acts as a silent intercom, while another handset is used as an intercom monitoring handset to listen tonoise in the room where the former monitoring handset has been placed. If you r...

Operators prefixe phonebook 24 Operators prefix phonebook If you have subscribed to several telephone operators, this phonebook allows you to store their prefixes.Each operator may offers competitive rates depending on the time, date and destination of the call. Oncethese prefixes have been stored, ...

Operators prefixe phonebook 25 You can also use yourphonebooks. Using the prefix phonebook Press on the idle screen. The telephone will show a “Day”, “Night” or“Weekend” entry, according to the date andtime of the call. If you wish to use this operator press OK |. • If you wish to use another operat...

Using the services 26 Using the services Operator services Your telephone provides easy access to a number of services provided by telephone operators. Theseservices are available using specific codes. These codes are pre-programmed into your telephone,however you may change them if they do not matc...

Using the services 27 If the caller has withheld theiridentity (service “Withheldidentity” or registered with“witheld id. default”, see page 31), the display will show“Number withheld”. The v icon flashes. Caller identification Lets you know who is calling before you answer the phone and offers the ...

Using the services 28 You can modify a displayednumber by pressing| CORRECT . Your ONIS 200 will take the callthrough the loudspeaker. Call forward Forwards your calls to a line of your choice. Declaring the service If you have registered with the call forward service, select it in the declare menu ...

Using the services 29 Call waiting Tells you when a new call is received if you are already on the line. Declaring the service If you have registered with the caller identification and Call waiting services, select Call waiting(see page 12) for guided use on your ONIS 200 screen. • If you have not r...

Using the services 30 Three-way call Allows you to speak externally to two people at the same time. For example, you are speaking to personA and you wish to introduce person B into the conversation. Declaring the service If you have registered with the “Three-way call” service, select it in the decl...

Using the services 31 Activating and deactivating call back The Call back service is offered by your operator when the line you are calling is busy. A voice messagewill tell you which key to press to activate the service. Your telephone will memorise the number andconnect you to the person you wish ...

Setting up the Onis Vox 200 answerphone Your ONIS Vox 200 answerphone can store around 15 mins of messages and has four modes. - Answer + Record with pre-programmed outgoing message (Preprg answ+rec), - Answerphone with pre-programmed outgoing message (Preprg answ only): the machine plays the pre- p...

Using the ONIS Vox 200 33 The answerphone can record anoutgoing message of up to 2minutes. You will hear your message. Ifyou wish to change the message,begin again from step . 2 The icon flashes to indicate a new message. Recording the outgoing message To activate Answer Only with a personal outgoin...

Using the ONIS Vox 200 34 The will flash during recording. The will flash to indicate a new message. Recording a conversation You can also record external calls using the handset. The recording is treated as an answerphone message. Checking and deleting messages Both the icon on the handset and the ...

Using the ONIS Vox 200 35 Screening your calls When your answerphone is in Answer+Record mode, you can listen to a message as it is being recorded and decide whether or not to take the call. For incoming external calls, the answerphone will be activated after the number of rings specified in the set...

Using the ONIS Vox 200 36 Memory full In Answer+Record mode, the answerphone automatically deactivates itself when there is no morestorage space in the memory. The answerphone will automatically re-activate itself once you have created space by deleting messages. Adjusting your answerphone Activatin...

Using the ONIS Vox 200 answerphone (remote use) 38 Using the answerphone (remote use) Scroll to “Change code” in the “Answphn”menu and select OK |. Enter the new remote access code and select OK |. 2 1 You will hear the recordedoutgoing message. This must be a tone type. Changing the secret access c...

Using the ONIS Vox 200 answerphone (remote use) 39 During remote accessing The following table shows the functions available during remote access. Press followed by the key which corresponds to the function you want. Once played, messages are automatically stored and listed as read in the Log. If le...

Settings Settings 40 The code is shown on the labelunderneath the base station(RC ...). After a few moments, the screendisplays “Recording ...”, followedby “Set !”. If this is not the case,begin the procedure again. Adding another ONIS 200 handset to the base station You can use up to 8 handsets on ...

Settings 41 The registration code is indicatedon the label underneath the base station (RC ...). No further procedure need becarried out on the base station.Stay close to the base station. Using the ONIS 200 handset with two basestations Each ONIS 200 HANDSET can be used with up to four BASE STATION...

Settings 42 Using GAP-standard compliance The GAP standard guarantees that all models of DECT GAP handsets and base stations comply with aminimum operating standard.Your ONIS 200 HANDSET and BASE STATION comply with this standard. Configuring line settings Dial mode This function allows you to choos...

Settings 43 Changing service codes The ONIS 200 comes with pre-programmed service codes (key sequences).You may access the codes if your operator uses different codes. To do this, use the “Service Codes”menu. L NOTE: You can obtain the letter “R”of a code by pressing the key. The letter “P” (pause) ...

Index Index 46 A Activating babysit mode 23Activating key tones 11Adding handset 40Additional handset I , 22, 23, 40 Adjusting volume 15, 17Alls calls 13Answer 16Answered calls 20Answerphone 32Answerphone full 36Automatic reading 21 B Babysit function 23Babysit mode 23Base ringer 10Base station III ...