Page 2 - Safety and Troubleshooting Information; Safety precautions and maintenance; Do not block the ventilation holes on the cabinet.; Installation Locations
Safety and Troubleshooting Information Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than thosespecified in this do...
Page 4 - About This Guide; It includes the following sections:; Notational Descriptions; Notes, Cautions and Warnings
About This Manual About This Guide • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor TV. It describes thefeatures, setup, operation and other important information. It includes the following sections: Safety and Troublesho...
Page 5 - RETURN TO TOP OF THE PAGE
CAUTION: This icon indicates information that tells you how to avoid either potentialdamage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and tells you how toavoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an ic...
Page 6 - Product Features; Technical Specifications*
Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features 180MT 18-inch SXGA LCD all-in-one Monitor/TV with exce...
Page 8 - Resolution & Preset Modes; • Maximum; 7 user definable modes; 7 factory preset modes:; Resolution
• Viewing Angle (C/R >10) Upper >85° (typ.) Lower >85° (typ.) Left >85 ° (typ.) Right >85 ° (typ.) • Response time <=30ms (typ.) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1280 x 1024 at 75Hz • Recommended 1280...
Page 9 - Automatic Power Saving; Power Management Definition
48.0 800*600 72.0 46.9 800*600 75.0 49.7 832*624 75.0 48.4 1024*768 60.0 56.5 1024*768 70.0 60.1 1024*768 75.0 68.7 1152*870 75.0 64.0 1280*1024 60.0 80.0 1280*1024 75.0 (Interlace mode is not applicable) RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card ...
Page 10 - Physical Specifications; * This data is subject to change without notice.; Pin Assignment; Pin
RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 452 x 452 x 200 mm (incl. Pedestal) • Weight 6.3 kg • Tilt (Forward / Backward) 0° / 20° • Power supply 100 — 240 VAC, 50/60 Hz • Power consumption 68 W (typ.) • Temperature 0° C to 35° C (operating)-20 ° C to 60° C (storage) • Re...
Page 11 - Product Views; Front View Product Description; Physical Function
4 Identical output - connectedto pin 10 12 Serial data line (SDA) 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V. Sync 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components....
Page 13 - PIP; Activate PIP (Picture in Picture) window and select size
Installing your LCD Monitor/TV Front View Product Description • Connecting to Your PC, TV antenna,DVD/VCR etc. • Removing and Re-installing the Base • Basic Monitor TV Connections • Getting Started • Optimising Performance Front View Product Description 1 PIP Activate PIP (Picture in Picture) window...
Page 14 - Automatically adjust the H/V position, phase and clock setting; MENU OK; Open the OSD and select the highlighted function; Side View; Headphone Jack
6 Automatically adjust the H/V position, phase and clock setting 7 Increase or decrease the level of audio volumeormove up or down the highlighted function in OSD 8 MENU OK Open the OSD and select the highlighted function RETURN TO TOP OF THE PAGE Side View Headphone Jack 1. LINE OUT Jack 2. Install...
Page 15 - Rear View
RETURN TO TOP OF THE PAGE Rear View Installing your LCD Monitor/TV file:///D|/TV/english/180mt/install/install.htm (3 of 6) [4/2/2003 10:41:53 AM]
Page 18 - Optimising Performance
1 DC 12V DC 12V power in 2 PC - Video D-Sub input 3 PC - Audio PC Stereo input 4 S-VIDEO (L) AV audio (L) S-VIDEO (R) AV audio (R) 5 S-VIDEO S-VIDEO in 6 L R - AV INY-Pb-PrComponent 6a Audio (L) in 6b Audio (R) in 6f CVBS in 6c, d, e Component video in 7 75 TV Antenna or CATV cable in RETURN TO TOP ...
Page 19 - Description of the On Screen Display; Basic and simple instruction on the control keys.; Europe; The OSD Tree
On-Screen Display Description of the On-Screen Display • The OSD Tree Description of the On Screen Display What is the On-Screen Display? This is a feature offered by all Philips LCD monitors/TVs. It allows an end user to adjust screen performanceof monitors directly through an on-screen instruction...
Page 26 - Using your Remote Control; NTSC System; Using your Remote Control
TV Control Using your Remote Control • Using the Teletext • Using the Programme Listing • Using Other Menu: PAL System - Europe • PAL System - Asia • NTSC System Using your Remote Control (For PAL system: Europe and Asia Pacific) TV Control file:///D|/TV/english/180mt/osd/tv_control.htm (1 of 10) [4...
Page 27 - Teletext features; Available in PAL system areas
1 PIP On/Off, Size To activate or close the 'Picture in Picture' function inPC mode and to enlarge or reduce the PIP window sizeusing the same button 2 PIP Shift To change 'Picture in Picture' window position in PCmode 3 AV source To select TV/Video sources ● If using TV 'STANDBY', press this button...
Page 28 - To access the last programme viewed.; Screen information; To select TV or PC mode; Numerical keys
10 Sound mode To switch from STEREO to MONO or to choosebetween Dual I and Dual II for bilingualtransmissions.For TV sets fitted with NICAM reception,depending on the transmission, you can switchfrom NICAM STEREO to MONO or choosebetween NICAM DUAL I, NICAM DUAL II andMONO. ● If using Teletext, pres...
Page 31 - To select TV or PC mode on and switch; digit must be entered before the dash; Using the Teletext (for areas where teletext service is available)
12 Selecting TVprogrammes To move up or down a programme.The number, (the name) and the sound mode aredisplayed for a few seconds.For some TV programmes the title of the programmeappears at the bottom of the screen. 13 PC/TV modeselection To select TV or PC mode on and switch 14 Smart picturecontrol...
Page 33 - Press button
4 Direct Accessto an item orcorrespondingpages The 4-colour buttons allowyou to access directly anitem or correspondingpages. RETURN TO TOP OF THE PAGE Press button Result on Screen 5 Mix Allows you tosuperimpose the Teletextpage over the TVprogramme. Press thebutton a second time toreturn to Telete...
Page 34 - Using the Programme Listing
9 Hold In 'Dual pages' mode, theHOLD button enables youto hold a page on oneside and activate thepage on the other sidewhich can be scrolled tomore pages by pressingthe cursor down or up. Toswitch the holding statusto the page on the otherside, press the HOLDbutton again. 10 Main Index Press the but...
Page 36 - Customer Care & Warranty
Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTYCOVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden •Switzerland • Spain • Unit...
Page 37 - Installing your LCD monitor driver; Installing Your LCD monitor driver; Adobe®; Download instructions:; To download the file:; Download
Download and Print Installing your LCD monitor driver • Download and Printing Instructions • Installing FPadjust Program Installing Your LCD monitor driver System requirements: PC running Windows 95, Windows 98, Windows 2000 , Windows Me, Windows XP or later ● Find your driver ".inf/.icm/.cat...
Page 38 - Printing instructions:; Installing FPadjust Program; To install; Exit your browser and install the FPadjust Program.
Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. RETURN TO TOP OF THE PAGE Installing FPadjust Program The FP Adjust program generates alignment patterns which will help you adjust monitor settings such asCONTR...
Page 39 - General FAQs; Turn on your monitor and then turn on your PC; What does 'refresh rate' mean in connection with an LCD monitor?
FAQs (Frequently Asked Questions) Safety and Troubleshooting • General FAQs • Screen Adjustments • Compatibility with Other Peripherals • LCD Panel Technology • Ergonomics, Ecology and Safety Standards • Troubleshooting • Regulatory Information • Other Related Information General FAQs Q: When I inst...
Page 40 - AUTO adjustment
30~61kHz and Vertical refresh rate 56~75Hz. However, users of monitors (of all brands, includingPhilips) may encounter certain limitations when viewing Microsoft Windows on a monitor operatingat 75Hz with Horizontal Frequency 30~61kHz. To serve specific needs on 75Hz, Philips provides aspecial drive...
Page 41 - Screen Adjustments; What is the FPadjust program on the setup disk and CD-ROM?
Q: Will the LCD screen be resistant to scratches? A: A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panelsurface is not subjected to any excessive shocks or scra...
Page 42 - How do LCDs compare with CRTs in terms of radiation?; Compatibility with other Peripherals; Can I connect my LCD monitor to any PC, workstation or Mac?
Q: When I install my monitor, how do I get the best performance from the monitor? A: For best performance, make sure your display settings are set at 1024x768@60Hz for 15",1280x1024@60Hz for 18". Note: You can check the current display settings by pressing the OSD OKbutton once.The current d...
Page 43 - LCD Panel Technology; What is a Liquid Crystal Display?
countries, Secam in France, the CIS and the majority of African countriesThe United States and Japan use a different system called NTSC. Q: What is SCART? A: The SCART is a 20-pin rectangular connector fitted to the vast majority of PAL market TV receivers. It provides composite video inputs and out...
Page 45 - Ergonomics, Ecology and Safety Standards; What is the CE mark?
A: Unlike a CDT monitor, the TFT LCD panel has a fixed resolution. For example, an XGA monitor has 1024x3 (R, G, B) x 768 pixels and a higher resolution may not be available without additionalsoftware processing. The panel is designed to optimise the display for a 65MHz dot clock, one of thestandard...
Page 46 - Does the product conform to general safety standards?; More information is provided in the
Standards. Q: Does the product conform to general safety standards? A: Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 95 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the workenvironment and recyclability. The specificati...
Page 47 - Common Problems; Check these items; Make sure the computer is turned on.; Imaging Problems; Press the Auto button.
Troubleshooting Safety and Troubleshooting • FAQs • Common Problems • Imaging Problems • TV and Audio Problems • Regulatory Information • Other Related Information This page deals with problems that can be corrected by the user. If the problem still persists after you havetried these solutions, cont...
Page 48 - Vertical flicker appears; Horizontal flicker appears; The screen is too bright or too dark; please; An after-image appears; TV and Audio Problems
Vertical flicker appears Press the Auto button. ● Eliminate the vertical bars using the ClockAdjustment of VIDEO NOISE in OSD MainControls. ● Horizontal flicker appears Press the Auto button. ● Eliminate the horizontal bars using the PhaseAdjustment of VIDEO NOISE in OSD MainControls. ● The screen i...
Page 49 - For further assistance, refer to the
Poor TV signal reception The proximity of mountains or high buildingsmay be responsible for ghost pictures,echoing or shadows. In this case, try manuallyadjusting your pictures: see 'fine tuning' oradjust the direction of the outside aerial.For Asia users in non-NTSC area: Does yourantenna enable yo...
Page 50 - Why do we have environmentally labelled computers?
Regulatory Information TCO '95 Information • TCO Environmental Requirements • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic Only) • ...
Page 52 - Environmental Requirements; Cadmium
RETURN TO TOP OF THE PAGE Environmental Requirements Brominated flame retardants Brominated flame retardants are present in printed circuit boards, cables, wires, casings andhousings. In turn, they delay the spread of fire. Up to thirty percent of the plastic in acomputer casing can consist of flame...
Page 53 - CE Declaration of Conformity; Energy Star Declaration
The TCO'95 requirement: neither CFCs nor HCFCs may be used during the manufacturingof the product or its packaging. _____________________________ * Bio-accumulative is defined as substances which accumulate within living organisms ** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulat...
Page 54 - PHILIPS
180MT This monitor is equipped with a function for saving energy which supports the VESA Display PowerManagement Signaling (DPMS) standard. This means that the monitor must be connected to acomputer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94.Time settin...
Page 55 - Commission Federale de la Communication (FCC Declaration); Réorienter ou déplacer l'antenne de réception.; EN 55022 Compliance (Czech Republic Only)
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computerdevice. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain orexcessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN...
Page 56 - Class B ITE; Class B Device
RETURN TO TOP OF THE PAGE VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) forInformation technology equipment. If this equipment is used near a radio or television receiver in a domesticenvironment, it may cause radio ...
Page 57 - Polish Center for Testing and Certification Notice
Please note that this device has been approved for non-business purposes and may be used in anyenvironment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a t...
Page 58 - North Europe (Nordic Countries) Information; Placering/Ventilation
RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄRDU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ERNEMT...
Page 59 - Plassering/Ventilasjon
Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTIIRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FORSTØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETU...
Page 60 - Information for UK only
RETURN TO TOP OF THE PAGE End-of-Life Disposal Your new monitor contains materials that can be recycled and reused. Specialized companies can recycleyour product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on ...
Page 61 - How to connect a plug; or coloured GREEN or GREEN AND
How to connect a plug The wires in the mains lead are coloured inaccordance with the following code: BLUE - "NEUTRAL" ("N") BROWN - "LIVE" ("L") GREEN & YELLOW - "EARTH" ("E") 1. The GREEN AND YELLOW wire must beconnected to the terminal in the plu...
Page 62 - For units set at 115 V :
Other Related Information Safety and Troubleshooting • FAQs • Troubleshooting • Regulatory Information • Information for Users in the U. S . • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Ty...
Page 63 - Philips' LCD Panel Pixel Defect Policy; Pixels and Sub pixels; Bright Dot Defects
Philips Pixel Defect Policy Product Features • Technical Specifications • Resolution & Preset Modes • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Philips' LCD Panel Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of th...
Page 64 - Black Dot Defects; Proximity of Pixel Defects; BRIGHT DOT DEFECTS; MODEL
One lit red, green or blue subpixel Two adjacent lit sub pixels:- Red + Blue = Purple- Red + Green = Yellow- Green + Blue = Cyan (Light Blue) Three adjacent lit sub pixels(one white pixel) Black Dot Defects appear as pixels or sub pixels that are always dark or 'off'. These are the types of black do...
Page 65 - TOTAL DOT DEFECTS
Total bright dot defects of all types 4 or fewer 3 or fewer BLACK DOT DEFECTS ACCEPTABLE LEVEL MODEL 150MT 180MT 1 dark sub pixel 4 or fewer 3 or fewer 2 adjacent dark sub pixels 2 or fewer 2 or fewer 3 adjacent dark sub pixels 0 0 Distance between two black dot defects* 15 mm or more 15 mm or more ...
Page 66 - Accessory Pack; Unpack all the parts.; Power cable
Connecting to Your PC, TV Antenna, DVD/VCRetc. Front View Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Removing and Re-installing the Base • Basic Monitor TV Connections • Getting Started • Optimising Performance Accessory Pack Unpack all the parts. Power ...
Page 67 - Setting up and connecting your monitor/TV
Power adapter(Use only AC/DC adapter modelLSE0111B1275) E-DFU pack RETURN TO TOP OF THE PAGE Setting up and connecting your monitor/TV Ensure that the power to the monitor/TV is switched off before the installation. - Connecting the monitor/TV Connect the cables to the back of your monitor/TV by fol...
Page 69 - If installation was not successful, see the
(1)~(3) items supplied RETURN TO TOP OF THE PAGE - Connect to PC Connect the cables to the back of your computer by following step 1~6 ● Switch on the power to your computer and monitor/TV and make sure the PC mode is selected ( ). If it is not, press the PC, TV/VIDEO selection button to select the ...
Page 70 - Installation section
Installation section (Getting Started) . RETURN TO TOP OF THE PAGE - Connect to DVD/VCD/VCR Connect to DVD/VCR/VCD through S-VIDEO Connect to DVD/VCR/VCD through S-VIDEO ● Connecting to Your PC, TV Antenna, DVD/VCR etc. file:///D|/TV/english/180mt/install/connect.htm (5 of 7) [4/2/2003 10:42:28 AM]
Page 73 - Removing and Re-installing the Base; for VESA standard mounting applications; Removing the Base
Removing and Re-installing the Base Front View Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Basic Monitor TV Connections • Getting Started • Optimising Performance Removing and Re-installing the Base : Removing the base • Re-installing the base Condition: ...
Page 74 - Re-installing the Base
VESA Standard Holes(100mm x 100mm) RETURN TO TOP OF THE PAGE Re-installing the Base Removing and re-installing the base file:///D|/TV/english/180mt/install/base.htm (2 of 4) [4/2/2003 10:42:29 AM]
Page 77 - Cable TV; Antenna
Basic Monitor/TV Connections Front View Product Description • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Removing and Re-installing the Base • Getting Started • Optimising Performance Basic Monitor/TV Connections: Cable TV • Antenna • Monitor TV to VCR Cable TV If your Cable TV signal is a si...
Page 78 - Monitor TV to VCR; BASIC CONNECTION
If your antenna has a round cable (75 ohm) on the end, then you're ready toconnect it to the TV.If your antenna has flat, twin-lead wire (300 ohm), you first need to attach theantenna wires to the screws on a 300 -to 75- ohm adapter. 1. Push the round end of the adapter (or antenna) onto the 75 (ohm...
Page 80 - Getting Started; For Windows 95; Start Windows 98; For Windows Me
Getting Started Front View Product Description • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Removing and Re-installing the Base • Basic Monitor TV Connections • Getting Started • Optimizing Performance Getting Started Use the information file ( .inf) for Windows 95/98/2000/Me/XP or later The ...
Page 81 - Start Windows Me; For Windows XP; Start Windows XP
Start Windows Me 1. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 2. Double click on the 'Display' Icon. 3. Select the 'Settings' tab then click on 'Advanced...'. 4. Select 'Monitor' button, then click on 'Change...' button. 5. Select 'Specify the location of t...
Page 83 - Choosing a language and country
Using Other Menus (PAL System - Europe) Using Your Remote Control • Using Other Menu: PAL System - Asia • NTSC System Install: Choosing a language and country • Automatic tuning • Manual tuning • Programme name Picture: Adjusting the picture Sound: Adjusting the sound Features: Timer function • Lock...
Page 84 - Automatic tuning; To exit from the menus, press; Manual tuning
To exit from the menus, press . 9. RETURN TO TOP OF THE PAGE Automatic tuning This menu allows you to automaticallysearch for all the programmes available inyour region (or on your cable network). First carry out operations 1 to 8above, then: 1. Press once to select AUTO STOREthen press . The search...
Page 85 - Sorting programmes
This menu allows you to store theprogrammes one by one. Press MENU. 1. Select INSTALL ( ), then press . The INSTALL menu appears. 2. Select MANUAL STORE ( ) thenpress . The menu appears: 3. Press to go to the SYSTEM menu. Use to choose EUROPE(automatic detection*) or manualdetection with WEST EUR (s...
Page 86 - Programme name
Press MENU key. The main menuis displayed. 1. Select INSTALL ( ), then press . The INSTALL menu appears. 2. Using the key, select SORT thenpress . The SORT menu appears. The FROM option is activated. Note: this menu works as follows:Change 'FROM' (enter the currentprogramme number),'TO' (enter the n...
Page 87 - Adjusting the picture; Press MENU then
You may, if you wish, give a name to thefirst 40 programmes (from 1 to 40). Press MENU. 1. Select INSTALL ( ), then press . The INSTALL menu appears. 2. Press 5 items to select NAME(concealed at the bottom of thescreen,) then press . The menu appears: 3. Select the programme you wish toname using th...
Page 88 - Adjusting the sound; Press MENU, select the SOUND
Description of the settings: BRIGHTNESS: alters thebrightness of the image. ● COLOUR: alters the colourintensity. ● CONTRAST: alters the variationbetween light and dark tones. ● SHARPNESS: alters thecrispness of the image. ● STORE: stores the picturesettings. ● COLOUR TEMP (colourtemperature): adjus...
Page 89 - Timer function; twice. The TIMER menu
sockets. STORE: stores the sound settings. ● AVL (Automatic Volume Leveller):automatic volume control used toavoid sudden increases in volume,particularly when chang programmesor during advertisements. ● INCR. SURROUND: The IncredibleSurround feature adds greater depthand dimension to both monaural(...
Page 90 - Locking the set; Locking programmes
DAILY for a daily alarm orOFF to cancel. Press to set the timer function to standby. It will automatically switch onat the time programmed. If you leavethe TV switched on, it will only changeprogramme at the time indicated.The combination of the CHILD LOCKand TIMER functions may be used tolimit the ...
Page 92 - Selecting the Menu Language and Automatic Tuning of Channels
Using Other Menus (PAL System - Asia) Using your Remote Control • Using Other Menu: PAL System - Europe • NTSC System Install: Selecting the Menu Language and Automatic Tuning of Channels • Manual Tuning of Channels • Selecting the Colour/Sound System • Fine Tuning of Channels • Sorting of Channels ...
Page 93 - Manual Tuning of Channels
screen. RETURN TO TOP OF THE PAGE Manual Tuning of Channels Manual tuning allows you to store eachprogramme manually. Press the MENU key to display themain menu. 1. Press the button repeatedly untilINSTALL is selected. 2. Press the button to enter INSTALL menu. 3. Press the button repeatedly untilMA...
Page 94 - Selecting the Colour/Sound System; Manual Tuning of; Fine Tuning of Channels
RETURN TO TOP OF THE PAGE Selecting the Colour/Sound System This feature allows you to select yourdesired COLOUR and SOUND system. IfAUTO is selected, the respective colourand sound system will be automaticallyselected in accordance with thetransmission system. Note: Select your desired colour and s...
Page 95 - Sorting of Channels
This feature allows you to adjust picturereception in areas of weak reception. Press the MENU key to display themain menu. 1. Press the button repeatedly untilINSTALL is selected. 2. Press the button to enter INSTALL menu. 3. Press the button repeatedly untilMANUAL STORE is selected. 4. Press the to...
Page 96 - Editing of Channels
To exit from the menus, press the button. 11. RETURN TO TOP OF THE PAGE Editing of Channels This feature allows you to edit or skipchannels which have a poor or weak TVsignal or channels that you do not watchoften. Note: Once a channel has been skipped, youcannot access it via the CHANNEL + or - but...
Page 97 - Naming of Channels; Press the
RETURN TO TOP OF THE PAGE Naming of Channels This feature allows you to select 10predefined channels. It also allows you toenter a new name or modify the existingname of a channel for 40 channels,including external channels. Press the MENU key to display themain menu. 1. Press the button repeatedly ...
Page 98 - Using the Picture/Sound Menu; Description of the picture settings:
using the button and select the next character. (You can enter up toa maximum of 5 characters) Press the MENU button to storenamed channel. 9. To exit from the menus, press the button. 10. RETURN TO TOP OF THE PAGE Using the Picture/Sound Menu The picture and sound menu allowsyou to make adjustments...
Page 99 - Description of the sound settings:
INCREDIBLE PICTURE: Selecting the 'ON'option enhances the detail in the picture.The result is a more dynamic and vividpicture. ● Note: HUE feature is only applicable to NTSCprogrammes. The HUE item will not appear on the menu ifthe programme is in PAL mode. Description of the sound settings: TREBLE:...
Page 100 - Language; Press; Tuner
Using Other Menus (NTSC System) Using Your Remote Control • Using Other Menu: PAL System - Europe • PAL System - Asia Install: Language • Tuner • Auto Programme • Manual • Channel Edit • Name Picture: Adjusting the Picture Sound: Adjusting the Sound Features: The Timer • The AutoLock TM • The Closed...
Page 101 - Auto Program
Press the MENU button on the remote control toshow the on-screen menu. 1. Press repeatedly until INSTALL is highlighted. 2. Press to shift the menu to the left. 3. Press once tohighlight the TUNERMODE. 4. Press to highlight the tuner option. 5. With the TUNER MODEset to AUTO, AutoProgram (see left) ...
Page 102 - Manual
clear the menu from the screen. Smart Help After you've run Auto Program, check the results.Press the CHANNEL (+) or (-) button and see whichchannels you can select.Remember an antenna or Cable TV signal must beconnected to your Monitor TV first (see the ' Basic Monitor TV connection ' section) If y...
Page 103 - Channel Edit; NOTE: When you want to add a channel that; Name
Channel Edit Press the MENU button on theremote control to show theon-screen menu. 1. Press repeatedly until INSTALLis highlighted. 2. Press to shift the menu to the left. LANGUAGE will behighlighted. 3. Press repeatedly until CHANNELEDIT control is highlighted. 4. Press to access the CHANNEL EDIT m...
Page 104 - Adjusting the Picture
Press and repeat for the second, third, fourth andfifth characters. After you have selected aname for the channel,press the MENU button tosave the name in the TV'smemory. 8. Press MENU buttonrepeatedly to clear themenu from the screen. 9. Smart Help The five characters that you can enterfor the chan...
Page 105 - Adjusting the Sound
COOL: makes whites, bluish.WARM: makes whites, reddish. IMAGEMAX TM : helps you sharpen the picture quality by making darkareas of the picture darker and lightareas of the picture brighter. ● Use or keys to adjust the BRIGHTNESS level of the picture. 3. After adjusting the BRIGHTNESS control, press ...
Page 107 - Activating the Timer
Using Other Menus (PAL System - Asia) Using Your Remote Control • Using Other Menu: PAL System - Europe • NTSC System Install: Selecting the Menu Language and Automatic Tuning of Channels • Manual Tuning of Channels • Selecting the Colour/Sound System • Fine Tuning of Channels • Sorting of Channels ...
Page 110 - Using the Programme List Feature
Note: You cannot access the locked channels via the front controls of the TV set. You can only accessthe locked channels via the remote control. When AVI source is locked, the CVI source is automaticallylocked. Similarly, if the CVI source is locked, the AVI source is also automatically locked becau...
Page 111 - Smart Picture and Smart Sound Control; Using Your Remote Control
The programme listing feature allows youto navigate through a list of installedprogrammes to gain a quick overview ofthe channels and activate the channel youhave selected. Press the (PROGRAM LIST) button to display the list of installedprogrammes. The current channel ishighlighted. 1. Press the or ...
Page 113 - Setting the Clock; Setting the Start Time
Using Other Menus (NTSC System) Using your Remote Control • Using Other Menu: PAL System - Europe • PAL System - Asia Install: Language • Tuner • Auto Program • Manual • Channel Edit • Name Picture: Adjusting the Picture Sound: Adjusting the Sound Features: The Timer • The AutoLock TM • The Closed C...
Page 114 - Setting the Stop Time
Just as you would an alarm clock, you can set the TV toturn itself ON once or at the same time every day. Press the MENU buttonon the remote control toshow the on-screenmenu. 1. Press twice tohighlight FEATURES. 2. Press and the menu will shift to the left.TIMER will behighlighted. 3. Press again to...
Page 115 - Selecting the Channel
Use the START TIME control to set the TV to turn itselfON once or at the same time every day. The followingsteps will guide you in setting the TV to turn itself OFFonce or at the same time every day. Press the MENU buttonon the remote control toshow the on-screenmenu. 1. Press twice tohighlight FEAT...
Page 116 - Setting Activate to ON or OFF
You can select a specific channel toappear on the television when the timerturns the set ON. Follow these steps toselect the channel. Press the MENU button on the remotecontrol to show the on-screen menu. 1. Press twice to highlight FEATURES. 2. Press and the menu will shift to the left. TIMER will ...
Page 117 - Turning ON the Timer Display
left. Then press repeatedly until theACTIVATE control is highlighted. Press again to set ACTIVATE to ONCE; press again for DAILY; and press again to toggle ACTIVATE to OFF. 5. Press the MENU button repeatedly toclear the menu from the screen. 6. RETURN TO TOP OF THE PAGE Turning ON the Timer Display...
Page 118 - Understanding AutoLock; AutoLock; offers a variety of Blocking Options:
RETURN TO TOP OF THE PAGE Understanding AutoLock TM The AutoLock TM feature receives and processes the data that contains programme content advice sent by the broadcasters or other programme providers. Whenprogrammed by the viewer, a TV with AutoLock TM can respond to the content advice and block an...
Page 119 - You can also block individual channels or block programmes; on the basis of the; Movie Ratings
that have no rating or are unrated. When the BLOCKING control is OFF, the blocking orcensoring of programmes is disabled. When the BLOCKING control is ON, programmeswill be blocked in accordance with the settings you have chosen. BLOCK UNRATED: All unrated programmes will be blocked if this feature ...
Page 121 - Setting up the Access Code
graphic violence (V), explicit sexualsituations (S), or crude, indecent language(L). RETURN TO TOP OF THE PAGE Setting up the Access Code AutoLock TM allows parents to block out or 'censor' any channels they think childrenshould not watch. A channel blocked by theAutoLock TM control cannot be viewed...
Page 122 - Blocking Channels; Blocking by Movie Rating
RETURN TO TOP OF THE PAGE Blocking Channels After your personal access code has beenset you are ready to select the channels orinputs you want to block out or censor. Press the MENU button on the remote control to show theon-screen menu. 1. Press twice to highlightFEATURES. 2. Press and the menu wil...
Page 123 - Blocking by TV Rating
Press and the menu will shift to the left. Then press once tohighlight the AutoLock control. 3. Use again to highlight ACCESS CODE. 4. Enter your four-digit ACCESSCODE. CORRECT will flash verybriefly in red and the menu willmove to the left with BLOCKCHANNEL highlighted. 5. Press repeatedly until MO...
Page 124 - Turning Block ON or OFF
Press or to select a rating. 8. Press or to turn the block on the rating ON or OFF. NOTE: More specific sub ratings (forviolence, sexual content, dialogue, orfantasy violence) are available for TV-Y7,TV-PC, TV-14 and TV-MA. 9. To access these sub ratings, press . Press or to select the sub rating th...
Page 125 - Blocking Unrated Broadcasts
OPTIONS is highlighted. Press to enter the BLOCK OPTIONS menu. BLOCKING will behighlighted. 7. Press or to toggle BLOCKING ON or OFF. 8. Press the MENU button repeatedlyto clear the menu from the screen. 9. RETURN TO TOP OF THE PAGE Blocking Unrated Broadcasts In addition to blocking specific rating...
Page 126 - Blocking Broadcasts That Have No Rating
Press the MENU button repeatedlyto clear the menu from the screen. 10. NOTE: If the BLOCK OPTIONS, BLOCKUNRATED control is turned ON, all unratedprogrammes will display the screen shown to theleft. To watch the channel, enter your accesscode or change the BLOCK UNRATED optionback to OFF. RETURN TO T...
Page 127 - Viewing Blocked Programming
Press the MENU button repeatedlyto clear the menu from the screen. 10. NOTE: If the BLOCK OPTIONS, BLOCKUNRATED control is turned ON, all programmescontaining NO content advisory data will displaythe screen shown to the left. To watch thechannel, enter your access code or change theNO RATING option ...
Page 128 - RATING options, simply enter your; Using the Closed Captioning Control
If you tune to a specific channel that has beenblocked by BLOCK CHANNEL or any of theAutoLock TM RATING options, simply enter your four-digit access code to view the channel.NOTE: this will unblock ALL channels until theTV is switched OFF. When the power to the TVis switched back ON, all previously ...
Page 130 - Your International Philips F1rst Choice Warranty; Thank you for purchasing this Philips monitor.; F1rst Choice Contact Information
Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliverhigh-quality performance, ease of use and ease of installation. Should you encounter anydifficulties while installing or usi...
Page 131 - Your International Guarantee; The Philips guarantee may not apply if:
Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highestquality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor andreplacement parts irrespective...
Page 132 - For three years thereafter,; Where IS SERVICE AVAILABLE?
LIMITED WARRANTY (Computer Monitor) Click here to access the Warranty Registration Card . Three Years Free Labor / Three Years Free Service on Parts / One Year Exchange* *Product will be exchanged with a new or renewed to original specifications unit within two business daysfor the first year. This ...
Page 133 - Where CAN I GET MORE INFORMATION?; or
Philips service organization will attempt to provide service (although there may be a delay if the appropriatespare parts and technical manual(s) are not readily available). Where CAN I GET MORE INFORMATION? For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U....
Page 136 - Eastern Europe; CZECH REPUBLIC; Latin America
Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Brasil • Canada • Chile • China • Colombia • Czech Republic • Dubai • Egypt • Hong Kong • Hungary • India • Indonesia • Korea • Malaysia • Mexico • Morocco • New Zealand • Pakistan • Paraguay • Peru • Philippines • Poland •...
Page 139 - NEW ZEALAND; Asia; BANGLADESH
NEW ZEALAND Philips New Zealand Ltd.Consumer Help Desk2 Wagener Place, Mt.AlbertP.O. box 1041AucklandPhone: 0800 477 999 (toll free)Fax : 0800 288 588 (toll free) Asia BANGLADESH Philips Service Centre100 Kazi Nazrul IslamAvenue Kawran Bazar C/ADhaka-1215Phone: (02)-812909Fax : (02)-813062 CHINA BEI...
Page 142 - Africa; MOROCCO; Middle East
SINGAPORE Philips Singapore Private Ltd.Consumer Service Dept.Lorong 1,Toa Payoh., P.O. box 340Singapore 1231Phone: 6882 3999Fax : 6250 8037 TAIWAN Philips Taiwan Ltd.Consumer Information Centre26F, 66, Chung-Hsiao W. Road Sec. 1TAIPEIPhone: 0800-231-099 or (02)-2382-4567Fax : (02)-2382-3027 THAILAN...
Philips 50PFL5907/F7
User Manual
Philips 39PFL2908/F7
User Manual
Philips 55PFL5907/F7
Quick Guide
Philips 29PFL4908/F7
User Manual
Philips 32PFL5708/F7
Manual
Philips 50PFL5708/F7
User Manual
Philips 20PT643R
User Manual
Philips 30PW862H
Manual
Philips 30PW850H
Manual
Philips HTS6500
User Manual
Philips 37PF9631D/37
User Manual