Philips 14PV345/05S - Manuals

Special functions on your TV-VIDEO Combi If a television programme, which transmits TELETEXT, is stored with programmenumber ’P01’, time and date will be set automatically. When you have plugged your TV-VIDEO Combi into the mains, you will bewelcomed with an OSD picture. All you have to do is follow...

Important for the United Kingdom This apparatus is fitted with an approved moulded 13 Ampplug. To change a fuse in this type of plug proceed as follows: a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 5A, A.S.T.A. orBSI approved type. c Refit the fuse cover. If the fitted plug ...

Initial installation a Open up the battery compartment of your remote controland place the batteries in it as shown in the picture. b Close the battery compartment. c If the aerial (antenna) has been connected to theTV-VIDEO Combi and the radio aerial has been adjusted,press the OK button. ’Automati...

Manual TV channel search In certain cases the ’Automatic TV channel search’ may not beable to find all of the TV channels (e.g. coded TV channels). Inthat case, use this manual method to set the channels. a Press the MENU button on the remote control. The main menu will appear. b Select the line ’ I...

Manual radio channel search a Press the MENU button. The main menu appears. b Select the line ’ Installation ’ with the P rB or A P q button and confirm with the SqC button. c Select the line ’ Radio store ’ with the P rB or A P q button and confirm with the SqC button. RADIO STORE Frequency search ...

D Automatic Channel Installation:Some cable companies or broadcasters offer thepossibility to install TV channels automatically with ’ACI’.Information about the installation offered and how toselect it, will appear on the screen.This set will recognize and install TV channels with ’ACI’automatically...

Setting the time and date a Press the MENU button on the remote control. The main menu will appear. b Select the line ’ Installation ’ with the menu buttons P rB or A P q and confirm with the menu button SqC . c Select the line ’ Set clock ’ with the P rB or A P q button and confirm with the SqC but...

SUMMARY OF USER GUIDE The OSD menu offers the following functions. More details on each can be found in the appropriate chapter. MAIN MENU Picture SoundSetupTapeInstallation ã Exit:« press MENU User guide (OSD) The OSD (On-screen display) shows the various functions inthe form of a menu on the telev...

Selecting a TV programme Select the required TV channel (=programme number) with the P pAB button or with the digit buttons 0-9 on the remote control. D If you don’t know the programme number of the requiredTV channel: a Press the P pAB button for more than 2 seconds. The TV channel list appears on ...

To switch the radio on, press the RADIO ON button. You can switch between radio- and TV-mode with the RADIO ON button. You can switch the radio off with the STANDBY m button. D You can be waken up by the radio. Read the paragraph’Switch on function (WAKE-UP TIMER)’ in the chapter’Additional function...

Playing a cassette a Put a cassette into the cassette slot. b Press the PLAY G button. c If you press the STOP h button once, the TV-VIDEO Combi will switch to pause. To stop, press the STOP h button again. d To eject the cassette, press the ? button on the TV-VIDEO Combi or press the STOP h button ...

Searching for tape position without thepicture (wind and rewind) a Stop the tape with the STOP h button. b Press the H (reverse) or I (forward) button. c To stop at a certain picture, press the STOP h button. Instant View With this function you can switch to picture search duringwind and rewind. a I...

Use ’Manual Recording’ to make a spontaneous recording (forexample, a programme currently being shown). E If you want to start and stop a recording manually, readthe section: ’Recording without automatic switch-off’. E If you want to start a recording manually but have itstopped automatically, read ...

Use programmed recording to automatically start and stop arecording at a later date. To make a programmed recording, your TV-VIDEO Combineeds to know: * the date you want to make the recording;* the programme number for the TV channel you want torecord;* the start and stop time of the recording;* wh...

D Under ’ VPS/PDC ’, use the P rB or A P q button to switch ’VPS or PDC’ on or off. D When you are recording, the red recording light atthe front of the TV-VIDEO Combi will be alight. f Confirm with the OK button when the information is correct. E ’ Press STANDBY to start recording ’ will appear on ...

How to read TELETEXT E Press the TELETEXT e button to switch the TXT decoder on and off. The TV-VIDEO Combi is now receiving the TXTof the TV channel currently selected. E To store the current page as preferred page, press the OK button. The next time you call up TELETEXT, you willautomatically turn...

Parental control This function will prevent unauthorised use of your TV-VIDEOCombi. All button-functions will be locked. D You can make programmed recordings while the parentalcontrol is on. a Press the MENU button. The main menu appears. b Select the line ’ Setup ’ with the P rB or A P q button and...

If, contrary to expectation, you have any problems using thisTV-VIDEO Combi, it may be caused by one of the reasonsmentioned below. You can also call the customer service centre in your country. You will find the phone number in the enclosed guaranteeleaflet. Your TV-VIDEO Combi does not respond to ...