Philips 1150X - Manuals

8 9 ENGLISH ENGLISH How the Unique Philips Norelco Lift and Cut Shaving System Makes Close Comfortable: Groove channels beard closer to cutting system Lifter raises hair Slots to cut long hairs Holes to cut short hairs even closer Click-On Precision Trimmer Automatic Worldwide Voltage 100V to 240V A...

12 13 ENGLISH Multi-Level Display ◗ Remove any sticker or protective foil from the display before using razor. ◗ Depending on the razor model, there are 3 different types of displays: C Display for Model 1180X C Display for Models 1160X and 1160XCC C Display for Model 1150X The display provides the ...

14 15 ENGLISH ◗ Remaining Battery Capacity C Model 1180X -The remaining batter y capacity is indicated by the number of charging lights that are on. ◗ Low Battery Indicator C Model 1180X -When the batter y is almost empty (5 or less shaving minutes left), the bottom charging light blinks orange. Whe...

16 17 ENGLISH Charging ◗ Charging, recharging or storing at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries. ◗ Always unplug this charging stand/Jet Clean System from the electrical outlet immediately after use, except when razor is (re)charging. You can store the...

18 19 ENGLISH C 4 Press the razor tightly into the holder to lock it into place. 5 The display on the razor will indicate razor is charging. 6 Charging requires one full hour. A fully charged razor has a cordless shaving time of up to 50 minutes (Models 1180X, 1160X and 1160XCC) or 40 minutes (Model...

ENGLISH Shaving C 1 Turn razor ON by pressing the on/off button once. Shave against the direction of beard growth using both straight and circular movements. The razor display will light up briefly (model 1180X only). 2 Stretch your skin with your free hand so blades can lift and cut whiskers. Gentl...

ENGLISH C 2 Insert the raised notch of the trimmer into the slot in the top of the razor ( 1 ). Press the trimmer down to attach it to the razor (2). You will hear a ‘click’. 3 Turn razor ON. The display lights up for a few seconds (Model 1180X only). 4 Hold trimmer to exact hairline desired. Move t...

ENGLISH 2 The lock symbol goes out and the razor turns ON to indicate that the razor has been unlocked. The razor is now ready for use. B The razor unlocks automatically when charging in the charging stand or Jet Clean System. Cleaning ◗ Always clean your razor after each use. ◗ Regular cleaning gua...

ENGLISH Cleaning the Shaving Unit in the Jet Clean System (1160XCC) CAUTION: Keep cleaning solution out of reach of children. Do not take internally. Avoid contact with eyes. In case of eye contact, thoroughly flush with cold water. If irritation persists, get medical attention. Important ◗ Only use...

ENGLISH C 5 Carefully lower the appliance back onto the Jet Clean canister making sure the release buttons snap back into place. When the canister is filled with cleaning solution, do not move appliance to prevent leakage. Jet Cleaning the Razor ◗ If the razor does not contain enough power for one (...

ENGLISH The razor will stay in one position until the end of the drying program. ◗ Do not press the ON/OFF button while the cleaning cycle is running. If this does occur, the cleaning cycle will stop and the razor holder will automatically move to the starting position. The cleaning cycle can be re-...

ENGLISH C 10 Place the retaining frame back onto the shaving head holder. C 11 Slide the retaining frame back into place (‘click’). C 12 Reattach the shaving head holder to the bottom part of the shaving unit. Cleaning the Trimmer Clean the trimmer after each use. 1 Turn razor ON with trimmer attach...

Cleaning the Jet Clean Canister (1160XCC) For optimal performance of the Jet Clean System, it is recommended that you empty the cleaning solution canister and thoroughly rinse the canister clean every 2 weeks. 1 Place the Jet Clean System on a flat, level surface. C 2 Simultaneously press the button...

ENGLISH Note: DO NOT place or clean any par ts of the charging stand/Jet Clean System in a dishwasher. Storage ◗ The razor can be placed in the charging stand/ Jet Clean System for safe storage. Remove the plug from outlet as soon as the razor is fully charged or cleaned. ◗ If appliance will not be ...

ENGLISH 39 ENGLISH 7 Discard your razor. Do not attempt to plug electrical cord into the outlet or recharge the razor after the battery has been removed. 8 Contact your local town or city officials for battery disposal information or call 1-800-8-BATTERY or www.rbrc.com for battery drop-off location...