Philips 109S - Manuals

Language Selection While English is the default language of LightFrame™, the User Interface can be set up to operate in Dutch,French, German, Italian, Portuguese, Spanish, Simplified Chinese, Traditional Chinese or Korean. Installation 1) To install LightFrame™, place the CD in the CD-ROM drive. 2) ...

Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor. A: No for a LightFrame™ 1 or 2 monitor you need to use LightFrame™ 1 or 2 software. It is however possible to use the LightFrame™ 2 software on a LightFrame™ 1 monitor. Q:What is the difference between LightFrame™ 1, LightFrame™ 2 a...

A: In Internet Explorer LightFrame™ 3 can enhance up to 16 pictures at the same time. LightFrame™ 3 filters the pictures it finds based on the minimum size of the picture therefore it may happen that some pictures arenot enhanced when you open a web page. Q:Can I enhance two or more area s at the sa...

Q: How do I use the LightFrame™ 3 control bar that appears at the top my screen? A: The control bar is another upgrade that helps you run all LightFrame™ 3 s neat, new features. The illustration below describes the tasks each button performs. Accustomed to working with the original LightFrame™ tray ...

For more information on sRGB, please visit: www.srgb.com * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor canautomatically reduce its power consumpt...

• Relative humidity(storage) 5% to 95% * Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300 ° , full white pattern. * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM sy...

Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) • PCUH411 USB Hub (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the UP arrow is pressed, the adjustment controlsfor the C...

UP and DOWN buttons are used when adjusting the OSD of your monitor Brightness hotkey. When the RIGHT arrow is pressed, the adjustmentcontrols for BRIGHTNESS will show up. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also usedin adjusting the OSD of your monitor. RETURN TO TOP OF THE PA...

On-Screen Display Description of the On-Screen Display • The OSD Tree • The OSD Controls Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitorsdirectly through an on-screen instru...

RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when youwant to later on work your way around the different adjustments. On-Screen Display file:///D|/Rita/LF3/lf3manual/english/OSD/OSDDESC.HTM (2 of 3) [2002/7/1...

Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden •Switzerland • Spain • United Kingdom EA...

Frequently Asked Questions 1. What does the "Designed for Windows" logo signify? The "Designed for Windows" logo means your Philips monitor fulfills the requirements andrecommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WHQL tests. 2. What is USB? Th...

Visual Ergonomics:MPRII: No requirement.TCO92: No requirement.TCO95: Set ergonomic rules including minimum contrast level, flicker and jitter.TCO99: Tightened TCO95 rules. Ecology:MPRII: No requirement.TCO92: No requirement.TCO95: Set general ecological standards including recycling preparation, env...

Make sure that all electrical devices (such as mobile phones) are at least 1m from the monitor ● Place the monitor in another physical location away from electrical interference ● Adjust the refresh rate to 75hz or higher. ● 13. How do I adjust my monitor's resolution? Available resolutions are dete...

18. Why is LightFrame " important to me? With LightFrame " , selected Philips monitors deliver TV quality video and photo display while maintaining monitor performance for text-based applications. The result is that movies and other videoare brighter and livelier; photos are more vibrant and...

Philips exclusive LightFrame " feature requires the combined operation of hardware that resides in your monitor and software installed on your system. It only works when a monitor with built-in hardwarereceives commands from system software. Without both the LightFrame TM hardware equipped monit...

See detailed Multimedia Base specifications on the product information page. 28. Why is a Multimedia Base better than separate speakers? The major advantage of the Multimedia Base is its minimal space requirements. In fact, it hardly usesany extra space at all: monitor depth and width are unchanged....

original values stored in the monitor. By readjusting gain values of the individual cannons, deviation isreduced to zero. Default values are stored during production. If the user sets a new color temperature, thisnew value is saved as the new default value. 33. When should calibration be performed? ...

37. Why does my monitor display "Out of Range"? The video card installed in your computer may be too high for the monitor 's specifications. Pleasecontact your computer manufacturer for details on how to lower resolution for your operating system. 38. What is Moir¨²? Why does my monitor have...

Please be aware that not all models in the Philips range has this manual degauss function. Some modelsare built with an auto degauss feature which automatically degausses the monitor when it is switched on. 42. How do I adjust the picture on the screen? Please perform the following to correct the pi...

This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor isusing an Aperture Grille, which consists of fine vertical wires to align the electron beams with thephosphors on the screen. To prevent these vertical wires from vibrating and to keep them properlyalign...

Glossary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal andvertical frequencies of input signals with those of the installed video card. An autoscan monitor can thusoperate with a...

Points where convergence error is specified . Convergence-error correction A method of correcting for convergence error to insure that all three beams land simultaneously in the sametriad. This is usually accomplished by means of special convergence-error correction coils in the deflectionyoke. CRT ...

Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between thevideo card and subsequent processing circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to limit electr...

In 1991, the Swedish Tjänstemannens Central Organization (TCO, Swedish confederation of ProfessionalEmployees ) set a standard even more severe than MPR-II, especially for alternating electric fields (AEF).The TCO standard is more severe since not only are the permitted field levels reduced compared...

Also called line frequency and expressed in kHz, it is the number of video lines written on the screen everysecond (from left to right). The higher the horizontal scanning frequency, the better the resolution (i.e., thehigher the resolution and/or the higher the refresh rate). RETURN TO TOP OF THE P...

L Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. (see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic radiation...

M Moiré effect A fringe pattern arising from the interference between two superimposed line patterns. In a monitor it comes from the interference between the shadow mask pattern and the video information(video moiré), and between the shadow mask pattern and the horizontal line pattern (scan moiré). ...

R Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number ofpixels in a line multiplied by the number of horizontal lines. See also video graph...

The ARAS coating reflects only about 0.5% of the incident light. AGRAS (Anti-Glare anti-Reflection Anti-Static) coating . A combined anti-reflection, anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software to automatically detect cable connection status. Shap...

SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse,red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitorusing one of three methods: 1. Separate sync: Horiz...

See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTLdriving, the red, green and blue signals can only be switched on or off or provided with an intensity sig...

Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your harddisk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe¨ Acrobat Reader installed, click on the link to install the application. Ad...

Troubleshooting Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having thisproblem? Check these items No Picture (Power LED not lit) Make s...

Regulatory Information TCO '99 Information • TCO Environmental Requirements • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic Only) • ...

Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electricand magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated andchlorinated flame r...

electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic inhigh doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It alsodemands that mercury is not ...

TCO: Swedish Confederation of Professional Employees) for TCO versions RETURN TO TOP OF THE PAGE Energy Star Declaration PHILIPS 109S4* This monitor is equipped with a function for saving energy which supports the VESA Display PowerManagement Signaling (DPMS) standard. This means that the monitor mu...

This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate ra...

Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière deconformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA C...

RETURN TO TOP OF THE PAGE MIC Notice (South Korea Only) Class B Device Please note that this device has been approved for non-business purposes and may be used in anyenvironment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment s...

RETURN TO TOP OF THE PAGE North Europe Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄRDU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ERNEMT TILGÆNGELIGE. Regu...

Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTIIRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FORSTØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETU...

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklemUntergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringemZeichenkontrast wären die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger. A...

have a value of 5A. If a plug without a fuse isused, the fuse at the distribution board shouldnot be greater than 5A. Note: The severed plug must be destroyed toavoid a possible shock hazard should it beinserted into a 13A socket elsewhere. How to connect a plug The wires in the mains lead are colou...

6G3B11 Multimedia Base (option) Front View • Rear View • Technical Specifications • Description of the Controls • Installing your Multimedia Base • Power adapter Installation Technical Specifications* • Output power 2 x 1.5W RMS / 36W PMPO • Bass Boost • Headphone connection 3.5 mm jack • Microphone...

D. Microphone jack Attach your microphone here. E. Audio In Connect this to the audiooutput of your PC. F. MIC Out Connect this to the microphoneoutput of your PC. G. DC Input Connect power input here. RETURN TO TOP OF THE PAGE Installing your Multimedia Pedestal 1. To INSTALL Slide the pedestal, al...

2. To UN-INSTALL Lift the back hook from the hole on the bottomplate of your monitor. ● Slide out the pedestal the opposite direction (fromwhen you installed it). ● RETURN TO TOP OF THE PAGE Power adapter Installation Installing the adapter There are two (2) ways of installing the adapterA. T-connec...

PCUH411 USB Hub (Option) Front View • Rear View • Installing your USB Hub Installing your USB Hub Installing on aconventional base. Take out theUSB hub fromthe box. 1. Take off the USBhub cover. 2. Slightly tilt and liftthe base of yourmonitor. 3. Attach the USBhub by clippinginto the base. 4. You c...

The OSD Controls Description of the On-Screen Display • The OSD Tree The OSD Controls : Brightness (HotKey) • Contrast (HotKey) • Language • Input Signal Selection • Zoom • Adjust Horizontal • Adjust Vertical • Adjust Shape • Adjust Color • Reset to Factory Settings • Extra Controls • Close Main Con...

1) Press the or button on the monitor. The CONTRAST window appears. 2) Press the or button to adjust the contrast. 3) When the contrast is adjusted to the level desired, stop pressing the or button and after three seconds the CONTRAST window will disappear with the new adjustment saved. Smart Help A...

3) Press the or button until the desired language is highlighted. 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted... Smart Help After returning to MAIN CONTROLS . . . . . . to continue to INPUT SIGNAL SELECTION, press the butt...

RETURN TO TOP OF THE PAGE INPUT SIGNAL SELECTION (Not available in all models) INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT A, but ifthe video input signal is different that the output signal, you may want to change it to INPUT B.? 1) Press the button on...

MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ZOOM, press the button until ZOOM is highlighted. Next, follow steps 3 - 5 under ZOOM. . . . to exit completely, press the button RETURN TO TOP OF THE PAGE ZOOM ZOOM increases or decreases the s...

4) Press the or button to adjust ZOOM. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST HORIZONTAL, press the button until ADJUST HORIZONTAL is ...

6) To adjust the horizontal size, press the or button. 7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST VERTICAL, press the button until ADJUST VERT...

6) To adjust the vertical size, press the or button. 7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST SHAPE, press the button until ADJUST SHAPE is ...

3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the arrow until ROTATE IMAGE is highlighted. 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. The OSD Controls file:///D|/Rita/LF3/lf3manual/english/OSD/osd_cont...

6) To adjust the rotation, press the or button. 7) When the rotation is adjusted, press the button to return to the ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted. 8) Press the button to return to MAIN CONTROLS. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to...

6a) If USER PRESET is highlighted, press the button to highlight RED. Next, press the or button to adjust the color red. 6b) When finished with RED, press the button to highlight GREEN. Next, press the or button to adjust the color green. 6c) When finished GREEN, press the button to highlight BLUE. ...

Smart Help After returning to MAIN CONTROLS . . . . . . to continue to EXTRA CONTROLS, press the button until EXTRA CONTROLS is highlighted. Next, start with step 3 under EXTRA CONTROLS. . . . to exit completely, press the button. RETURN TO TOP OF THE PAGE EXTRA CONTROLS DEGAUSS EXTRA CONTROLS is a ...

5) To degauss your screen, press the button. Your screen will be degaussed, then the MAIN CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST MOIRE, press the button until EXTRA CONTROLS is highlighted....

5) Pess the button. LIGHTFRAME will be activated. 6) Press button to go back to MAIN CONTROLS. Press button again to exit the OSD. RETURN TO TOP OF THE PAGE CLOSE MAIN CONTROLS The OSD Controls file:///D|/Rita/LF3/lf3manual/english/OSD/osd_cont.htm (26 of 27) [2002/7/10 ?? 02:46:37]

Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliverhigh-quality performance, ease of use and ease of installation. Should you encounter anydifficulties while installing or usi...

Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highestquality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor andreplacement parts irrespective...

LIMITED WARRANTY (Computer Monitor) One Year Exchange* *Product will be exchanged with a new or renewed to original specifications unit within two businessdays for the first year. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other documentshowing th...

All Philips monitors are designed and manufactured to high standards and deliver high-qualityperformance, ease of use and ease of installation. Should you encounter any difficulties whileinstalling or using this product, please contact Philips directly to benefit from your Philips F1rstChoice Warran...

LIMITED WARRANTY (Computer Monitor) Three Years Free Labor / Three Years Free Service on Parts / One Year Exchange* *Product will be exchanged with a new or renewed to original specifications unit within two business daysfor the first year. This product must be shipped in at your expense for service...

Warranty service is available in all countries where the product is officially distributed by Philips ConsumerElectronics. In countries where Philips Consumer Electronics does not distribute the product, the localPhilips service organization will attempt to provide service (although there may be a d...