Philips 107B7 - Manuals - manualsarea.com

Page 2 - 7” CDT Color Monitor 107B7; Revision List; Version Date; Initial

17” CDT Color Monitor 107B7 2 Revision List Version Date Revision History A00 May-28-2006 Initial Release

Page 4 - Monitor Specifications; Timing

17” CDT Color Monitor 107B7 4 1. Monitor Specifications 1. CRT : 43.2CM(17") 90 Deflection, 29mm Neck, 0.25mm phosphor dot pitch, Pure Flat high brightness high contrast CRT, Non-Glare Screen 2. Viewable image Size: 40.6CM (16") diagonal 3. Display Color: Unlimited Colors 4. External Control...

Page 5 - International Regulatory Specification

17” CDT Color Monitor 107B7 5 10. Video Bandwidth: 180 MHz 11. Power Source: Switching Mode Power Supply AC 90 ~264V, 50 ± 3/60 ± 3Hz Universal Type 12. Operating Temperature: 0°C to 40°C Ambient 13. Humidity: 5% to 90% Relative, Non-Condensing 14. External Connection: 15 Pin D-type Connector AC Pow...

Page 6 - E = Electromagnetic Compatibility

17” CDT Color Monitor 107B7 6 E EN55022 or Cisper 22 Certificate of Conformity Sa UL 60950-1: 2003 UL certificate E FCC Part 15 Class B FCC ID grant or DOC O Energy Star EPA registration USA X 21CFR 1002.10 to 13 (CRT) DHHS report Sa CSA C22.2 No 60950 CSA certificate E ICES-003 issue 3 Statement on...

Page 7 - Precautions and notices

17” CDT Color Monitor 107B7 7 2. Precautions and notices 2-1.Safety precautions 1. Observe all caution and safety related notes located inside the display cabinet. 2. Operation of the display with the cover removed, may cause a serious shock hazard from the display power supply. Work on the display ...

Page 8 - on high voltage equipment.

17” CDT Color Monitor 107B7 8 2-2 Product safety notice Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Before replac...

Page 9 - Operating instructions; Description

17” CDT Color Monitor 107B7 9 3. Operating instructions This procedure gives you instructions for installing and using the Color display. 1. Position the display on the desired operation and plug the power cord into a convenient AC outlet. Three- wire power cord must be shielded and is provided as a...

Page 10 - Adjustment; -1 Adjustment conditions and precautions; preset at the factory.; -2 Main adjustments

17” CDT Color Monitor 107B7 10 4. Adjustment 4-1 Adjustment conditions and precautions 1. Approximately 30 minutes should be allowed for warm up before proceeding. 2. Adjustments should be undertaken only on those necessary elements since most of them have been carefully preset at the factory. 4-2 M...

Page 11 - Basic and simple instruction on the control keys; to make your adjustments within.; The OSD Tree

17” CDT Color Monitor 107B7 11 Basic and simple instruction on the control keys On the front controls of your monitor, once you press the MENU button, the On Screen Display (OSD) Main Controls window will pop up and you can now start making adjustments to your monitor's various features. Use the to ...

Page 14 - HE

17” CDT Color Monitor 107B7 14 OV User OSD VC Save and Exit OH User OSD HC Degauss EA EHT Auto Adjustment B-Bias HE HEHT Gain G-Bias VE VEHT Gain R-Bias EO EHT Offset G-Gain EU EHT Current B-Gain BP B Plus R-Gain BB Bottom Balance Brightness TB Top Balance Contrast HB HS Wave Balance V-Moire Reduce ...

Page 17 - System and equipment requirements

17” CDT Color Monitor 107B7 17 4-4 DDC Instructions 128 bytes EDID Data (Hex): 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 0 00 FF FF FF FF FF FF 00 41 0C 1D 00 01 00 00 00 16 01 0F 01 03 68 20 18 78 2B 9E A8 A1 54 46 99 24 32 0E 48 4C A5 EF 00 31 59 45 59 61 59 71 4F 81 80 48 81 59 A9 40 A9 45 ...

Page 18 - Printer connector

17” CDT Color Monitor 107B7 18 Fig 1 Step 1: Put the “Newphl.exe” and “(105G7) S554BPHL.ddc” to a special folder, such as 105G7. And rename the “(105G7) S554BPHL.ddc” as “W.ddc” Step 2: Access to MS-DOS program, Input the command as shown fig 2 Note: g: is the disk position for 105G7 Printer connect...

Page 19 - Step 3: Press Enter into the next screen as shown Fig 3.

17” CDT Color Monitor 107B7 19 Step 3: Press Enter into the next screen as shown Fig 3. a. Input 14 byte digital Serial No. such as “11111111111111” as shown Fig 3. b. Enter and press “F3” key to input Serial No. again as shown Fig 4. Enter The Serial No. length is”14” as shown Fig 4. c. If you corr...

Page 22 - Circuit description; -1 Micro controller and deflection circuit; The program memory of the SAA4849 consists of 48K bytes ROM.; H/V sync signals processor; Via power-on reset circuit

17” CDT Color Monitor 107B7 22 5. Circuit description 5-1 Micro controller and deflection circuit Micro Controller The micro controller(IC101) core is a 80C51 type. The micro clock frequency of 12 Mhz is derived from the Xtal oscillator, which is running at 48MHz. The DDC interface is suitable to ha...

Page 23 - B+ Control Function Block; stage via I; HPLL; C bus the

17” CDT Color Monitor 107B7 23 x-ray protection The x-ray protection(pin22) input XRAY provides a voltage detector with a precise voltage input for X-ray protection .If the input voltage at XRAY exceeds the upper threshold for 150us to 300us,the system is forced to shut down by switching off vertica...

Page 24 - Location Description

17” CDT Color Monitor 107B7 24 5-2 Transistor & Diode and IC Circuit Location Description Function IC101 SAA4849PS CPU IC601 TDA4863A Vertical Output IC IC801 NT6812KG-20019 Video PreAmplifier/OSD IC IC802 LM2476 Video Output IC IC901 STR-G5643D PWM Combi power MOS IC IC902 L7805CV DC to DC IC C...

Page 25 - Mechanical Instructions; Remove 3 screws as shown in Fig. 1 and Fig. 2

17” CDT Color Monitor 107B7 25 6. Mechanical Instructions 0. General To be able to perform measurements and repairs on the "circuit boards", these unit should be placed in the service position first. 1. Remove the rear cover Remove 3 screws as shown in Fig. 1 and Fig. 2 2. Video board Cut th...

Page 26 - Disconnect the Hi-Pot cap between the CRT and

17” CDT Color Monitor 107B7 26 3. Main panel Disconnect the rotation coil from Main board as shown in Fig. 9 Disconnect the degaussing coil and ground-screw from Main board as shown in Fig. 10. Disconnect the BY coil from Main board as shown in Fig. 11. Disconnect the key board connector P102 from M...

Page 27 - Remove Main board; Remove four screws as show in Fig. 16

17” CDT Color Monitor 107B7 27 4. Remove Main board 5. Remove Front frame Remove four screws as show in Fig. 16 Fig. 15 Fig. 13 Fig. 14 Fig. 17 Fig. 16

Page 28 - Trouble Shooting Chart; CRT Relative Circuit Problems

17” CDT Color Monitor 107B7 28 7.Trouble Shooting Chart 7-1 No Raster 1.CRT Relative Circuit Problems REFER ITEM S.M.P.S. BRIGHTNESS SET TO MAX. THEN CHECK CRT G1 VOLTAGE NG NG NG NG NG OK OK OK OK OK CHECK THE HIGE VOLTAGE CHECK THE VOLTAGE OF CRT HEATER ABOUT 6.3V CHECK VOLTAGE OF THE CRT CHECK BR...

Page 29 - Abnormal Video Level On Screen

17” CDT Color Monitor 107B7 29 2.Abnormal Video Level On Screen OK NG OK NG NG OK OK CHECK THE VOLTAGE OF IC801 CHECK THE SIGNAL INPUT OF R.G.B.ABOUT 0.7Vpp CHECK THE VIDEO OUTPUT OF IC801 R.G.B. APPROACH STANDARD CHECK SIGNAL CABLE OR INTERFACE CARD. CONTRAST SET MAX. PIN 10, 18 ABOUT 5V CHECK 5V R...

Page 30 - No Signal On Screen

17” CDT Color Monitor 107B7 30 7-2. Abnormal Display No Signal On Screen CHECK FBT RELATIVE CIRCUIT LESS THAN 400V OK NG NG OK OK NG OK NG CHECK THE OUTPUT VOLTAGE CHECK THE VOLTAGE OF CHECK THE VOLTAGE OF CRT CATHODE ABOUT 40Vpp CHECK THE VOLTAGE OF FBT SCREEN CHECK THE RELATIVE CIRCUIT CHECK THE 5...

Page 32 - Abnormal Horizontal Width Of Video

17” CDT Color Monitor 107B7 32 7-5. Abnormal Horizontal Deflection 1.Abnormal Horizontal Width Of Video NG OK CHECK THE RELATIVE CIRCUIT CHECK THE RELATIVE CIRCUIT OF SMPS. READJUST H-WIDTH FUNCTION OFQ406 CHECK THE HV OF CHECK FBT B+ VOLTAGE CRT ABOUT 25KV ABOUT 62V AT FH=31KHz NG OK 2.Abnormal Hor...

Page 33 - Abnormal Vertical Size

17” CDT Color Monitor 107B7 33 7-6 Abnormal Vertical Scanning 1. Abnormal Vertical Size OK NG OK NG READJUST V-SIZE FUNCTION VALUE RELATIVE CIRCUIT CHECK VERT. OSC CIRCUIT RELATIVE CIRCUIT NG READJUST V-SIZE FUNCTION VALUE CHECK THE VOLTAGE OF IC101 RELATIVE CIRCUIT CHECK IC101 PIN33, 34 CHECK THE I...

Page 35 - Mechanical of cabinet front dis-assembly

17” CDT Color Monitor 107B7 35 8. Mechanical of cabinet front dis-assembly

Page 36 - Spare parts List

17” CDT Color Monitor 107B7 36 9. Spare parts List 107B70/00 PCB Part No. for TPV Description Philips P/N (12NC) CMB784B1T9EP1P CHASSIS FOR P784B3-1 PHILIPS POH 9965 000 35708 CKB784B1TP1P KEPC FOR B784B3-1 PHILIPS 9965 000 35711 CRB784B1T9P1P CRT BOARD P784B3-1 PHILIPS ROHS 9965 000 35739 Panel Par...

Page 37 - TRANSISTOR HOUSING; Main Board; CHASSIS LABEL

17” CDT Color Monitor 107B7 37 005C711 TRANSISTOR HOUSING 9965 000 35735 084C3310 FUSE CLIP 9965 000 35535 040C45762412B LABEL 9965 000 35538 087C3504ZW CRT SOCKET(QQ FOCUS) 9965 000 35877 Main Board Location Part No. for TPV Description Philips P/N (12NC) CMB784B1T9EP1P CHASSIS FOR P784B3-1 PHILIPS...

Page 42 - RECTIFIER DIODE FR107

17” CDT Color Monitor 107B7 42 R723 061C175L10252T CFR 1K OHM -5% 1/2W 9965 000 35801 R901 061C175L10552T CFR 1M OHM -5% 1/2W 9965 000 35802 R606 061C175L12152T CFR 120 OHM -5% 1/2W 9965 000 35803 R605 061C175L15952T CFR 1.5 OHM -5% 1/2W 9965 000 35804 R741 061C175L43452T CFR 430K OHM -5% 1/2W 9965 ...

Page 44 - Key Board; LED

17” CDT Color Monitor 107B7 44 C102 065C4501043T 0.1UF 50V Y5V 9965 000 35854 C101 065C4501043T 0.1UF 50V Y5V 9965 000 35854 C112 065C4501047T 0.1UF 80-20% 50V Y5V 9965 000 35578 C111 065C4501047T 0.1UF 80-20% 50V Y5V 9965 000 35578 C431 065C4501047T 0.1UF 80-20% 50V Y5V 9965 000 35578 C429 065C4501...

Page 45 - CRT Board; BRASS PIN

17” CDT Color Monitor 107B7 45 CRT Board Location Part No for TPV Description Philips 12NC CRB784B1T9P1P CRT BOARD P784B3-1 PHILIPS ROHS 9965 000 35739 G2 009C2038 BRASS PIN 9965 000 35873 P801 033C32786D WAFER 9965 000 35874 P802 033C327814D WAFER& PLUG 9965 000 35875 040C45762412B LABEL 9965 0...

Page 47 - Location

17” CDT Color Monitor 107B7 47 C837 065C44447113T 470PF -10% Z5P 50V 9965 000 35577 C814 065C4501047T 0.1UF 80-20% 50V Y5V 9965 000 35578 C804 065C4501047T 0.1UF 80-20% 50V Y5V 9965 000 35578 C832 065C251K1042T 0.1UF 250V 9965 000 35579 C831 065C251K1042T 0.1UF 250V 9965 000 35579 C829 065C251K1042T...

Page 49 - IC Block diagram

17” CDT Color Monitor 107B7 49 12.IC Block diagram IC101 1 2 3 4 52 53 54 5 50 6 7 8 49 9 10 11 13 14 15 16 17 18 19 20 21 36 37 38 39 40 41 42 43 44 45 46 47 48 51 12 55 56 22 23 24 25 26 27 28 35 34 33 32 31 30 29 SwiChoice ISCL ISDA Mute G1 Hs Vs DSCL ROTA Pro H-LIN Unlock CLAMP VsOUT CS1 CS2 CS3...

Page 51 - VCC

17” CDT Color Monitor 107B7 51 IC102 M24C08 IC102 M24C08 1 8 2 7 3 6 4 5 IC601 TDA4863AJ 1 3 2 6 7 4 5 VCC N VF -I/P +I/P GND +O/P 4 7 1 2 6 3 5 + - AMPLITIER POWER PROTECTION THERMAL GENERATOR FLYBACK

Page 53 - VBB

17” CDT Color Monitor 107B7 53 IC802 LM2476 15 19 17 18 16 2 8 14 3 6 4 1 5 13 10 7 9 12 11 OUTD1 OUTD2 OUTD3 N/C N/C VBB INC3 VCC IND3 INC1 IND1 IND2 GND OUTC3 GNDS INC2 OUTC1 N/C OUTC2

Page 55 - PCB Layout

17” CDT Color Monitor 107B7 55 13. PCB Layout 13.1 Main Board

Page 57 - 7” CDT Color Monitor 107B7; Schematic diagram; CPU

17” CDT Color Monitor 107B7 57 14. Schematic diagram CPU 62K R147 1/4W CONN P102 1 3 4 5 2 1000PF C130 10 R111 0.046V 0.35V 3.159V 3.9K R116 Key2 150 1/4W R705 2.282V 8.2 2W R912 4700PF/100V C117 J066 2.4K 1/6W 15K R106 H803 GND DSDA DSCL VS HS 5V Sense 4.801V 4.802V 0.4043V ROTA 1K 1/4W R970 5K6 R1...

Page 58 - Power

17” CDT Color Monitor 107B7 58 Output 100K 1/4W R419 UF4004 D403 73C147-539-H L401 5 3 2 4 120 1W R606 560 3W R456 1K R443 + 10UF NC C712 56K 1/ 2W R740 1 1W R607 100 1/4W R425 EWDRV VOUT1 12 11 79A774-504-EG T402 1 F1 3 F2 EHT G2 13 7 4 614 2 10 5 9 8 1k R484 Unloc k 160K 1/6W R716 + 47UF/50V C609 ...

Page 62 - General Product Features

17” CDT Color Monitor 107B7 62 6.4 Humidity 6.5 Altitude 6.6 Air pressure 6.7 Earth magnetic field 7.0 Regulatory compliance 7.1 World regulatory 7.2 EMC requirements 7.3 MPR II / TCO 7.4 RoHS 7.5 WEEE 7.6 Ongoing regulatory 1. Scope This specification describes features and performance of 107B7 CRT...

Page 64 - Preset & Preload Modes Timing Chart

17” CDT Color Monitor 107B7 64 • Preload video modes - 15 preload modes. Parameters preloaded in EEPROM, little size and centering deviations are allowed, but geometry distortions should be strictly managed for users easy adjustment. The user can recall the factory setting in OSD menu. • User modes ...

Page 67 - Resolution

17” CDT Color Monitor 107B7 67 2.6 Power Supply 2.6.1 Features • AC line voltage range - 90Vac ~ 264Vac. • AC line frequency range - 50/60 Hz ± 3 Hz. • Input voltage transient - 300Vac for 10 seconds (China), 280Vac for 10 seconds (RoW). • Inrush current - < 50 A at 240Vac cold start. • Earth lea...

Page 68 - Function

17” CDT Color Monitor 107B7 68 • Power on - < 75w. (Test requirements refer to EN61000-3-2) • Active off - < 2w at 120Vac / 240Vac. • Switch off - < 2w at 120Vac / 240Vac. 2.6.3 Power saving conditions The monitor enters DPM off mode when no H&V sync or one of H-sync / V-sync input is a...

Page 69 - languages; level; level

17” CDT Color Monitor 107B7 69 • High Brightness - By hotkey only, 4 levels. 1. Text 2. Internet 3. Game 4. Multimedia 2.7.2 OSD menu • Languages (per region) - 9 languages (English, French, German, Italian, Spanish, Portuguese, Korean, Turkish, Russian). • OSD tree - As shown below. OSD tree / Engl...

Page 70 - Pin

17” CDT Color Monitor 107B7 70 2.7.4 Monitor status information • Self-test feature - “CHECK SIGNAL CABLE” message appears when video cable is disconnected. • Out of scan range - “FREQUENCY IS OUT OF RANGE” appears when input H-sync or V-sync out of range. • Resolution & H/V input - Shown in OSD...

Page 72 - Optical performance

17” CDT Color Monitor 107B7 72 • Jitter - < 0.1mm. (No annoying level by visual) 3.3 Optical performance • Focus - “me” pattern characters must be clearly identified at prime mode, brightness 50%, set contrast for 25Fl at full white. • Full white luminance - 29 ± 4 fl (brightness: 50%, contrast: ...

Page 74 - Per Philips make-up sheet

17” CDT Color Monitor 107B7 74 5.5 Color for resin/paint Per Philips make-up sheet 5.6 Resins • RoHS requirements. • WEEE requirements. 5.7 If paint is used • RoHS requirements. • WEEE requirements. 5.8 Plastic mold tooling • Tooling to be designed to minimize cosmetic defects induced by molding pro...

Page 77 - Table 5.16.3. Sea shipment container loading for other regions

17” CDT Color Monitor 107B7 77 Sets/Block (PA) 16 16 20 Sets/Block (PB) 8 NA 10 Blocks/Container (PA) 24 12 24 Blocks/Container (PB) 2 NA 2 Total sets 400 192 500 Table 5.16.3. Sea shipment container loading for other regions Container size 40’ 20’ 40’ High Cube PWHC 45' W/ Pallet W/ Pallet W/ Palle...

Page 80 - Grey Grey

17” CDT Color Monitor 107B7 80 E = Electromagnetic Compatibility O = Other which including recycling, energy saving, ergonomics X = X-ray For detailed regulatory items please refer to the international regulatory specification provided by Philips. 7.2 EMC requirements Supplier DVT EMI test result mu...