Philips 10 - Manuals - manualsarea.com

Page 2 - Contents

1 Contents 1. Requirements before starting the installation .......................................................................................................... 2 2. Find out the state of the TV ......................................................................................................

Page 3 - Requirements before starting the installation; See Instant Initial Cloning page 27.

2 1. Requirements before starting the installation Before starting the installation, make sure that you have everything you need at hand. Master remote control 22AV8573 or Guest remote control 22AV1104B And USB stick You will need the master remote control or the guest remote control to access the m...

Page 4 - Find out the state of the TV; PBS mode on; Disable the PBS Mode

3 2. Find out the state of the TV It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before. If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See chapter 4 of this manual. If you power on the set and then press the...

Page 6 - If all is correct select “YES” and press “OK”.

5 Navigate to “Reinstall TV” Press “OK” to reinstall TV set. If all is correct select “YES” and press “OK”. After this operation the TV will power off and on and display the installation wizard. Note: All settings are at default values and no channel plan is available. After reinstalling, the PBS Se...

Page 7 - Installation wizard.

6 4. Installation wizard. When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen. Here you will need to select your preferred language. After this, you will need to select the country. Depending on the country selection, some pre-defined setti...

Page 13 - Channel options; Reordering channels; Check if PBS Menu is active.

12 5. Channel options a. Reordering channels Check if PBS Menu is active. Press “Home” button to see the guest menu. If the menu is displayed with “Add new device” and “Help”, the PBS Menu is not active. If the menu is displayed without “Add new device” and “Help”, the PBS Menu is active and TV menu...

Page 15 - Add new device”; and “

14 When you press “OK” the next image will appear and you will have to confirm. After the confirmation the TV will restart. After power on all PBS settings will be disabled. This menu will allow you to set up channels, reinstall channels, change picture settings, add new devices. As you can see in t...

Page 18 - PBS Mode; All settings in the PBS mode Setup menu are active.

17 6. PBS Mode [Off]: The TV operates as a basic (consumer) TV. [On]: All settings in the PBS mode Setup menu are active. Only by switching on this mode the TV acts as a Hospitality TV. Sets the room ID. Room ID can be used to distinguish between different floors/rooms/setups when using SmartInstall...

Page 21 - only

20 [Off]: TV responds to commands guest remote control. [On]: TV does not respond to commands guest remote control. Master remote control 22AV8573 (yellow) or RC2573 (green) commands are not affected by this setting. [Off]: On Screen Display suppressed. [On]: On Screen Display not suppressed. [Off]:...

Page 26 - This will store all settings and restart TV to apply all changes.; TV to USB; and; Check how to clone settings

25 This will store all settings and restart TV to apply all changes. After storing PBS settings, the TV will restart to apply the new parameters. Now you can clone all settings to other TV sets by using the option TV to USB and USB to TV. Check how to clone settings .

Page 27 - Welcome Logo; How to upload Welcome Logo

26 7. Welcome Logo Startup time takes up approximately 7 seconds File format: 1280 x 720 / PNG / NO layers / 256 colors Note: below timing values are approximate indications and can differ from real situation! How to upload Welcome Logo 1. Create graphics file: 1280 x 720 / PNG / NO layers / 256 col...

Page 29 - RECALL; button, available only if PBS mode is ON.

28 11. CSM (Consumer Setup menu) The CSM contains data about the TV software, serial number and other details. The menu can be accessed using a standard remote control or using the master remote control. 1. Using the standard remote control: press the following key sequence “1,2,3,6,5,4” 2. Using ma...