Philips 1 - Manuals

1. Keystone Correction A keystoned image (picture top width larger than picturebottom width or vice versa) appears when the relativepositions of the projector and the screen are not correct.With the ‘keystone correction’ feature you can correct thispicture distortion. Digital keystone correction is ...

Positioning the projector and screen • Place the projector on a stable, level surface, out of directsunlight and away from sources of excessive dust, dirt, heat,water, moisture, vibration and strong magnetic fields.Face the projector towards the screen for the best pictureresults. To determine the d...

Video/computer cables and adapter These accessories (1 to 3) are supplied with the product forconnecting the projector to computer/AV equipment. The numbers in the left-hand column correspond with thenumbers in the connection diagrams on the following pages. When connecting the projector to a Macint...

Connecting to a computer Caution! – The data input is suitable for both Apple Macintoshcomputers (Power Book and Power Mac) as well as for IBM compatible PCs. – The data output of IBM compatible PCs can be connecteddirectly to the projector using standard data cables. – Apple Macintosh computers may...

Connecting to video equipment Note: The figures in brackets (1) correspond to the figures in the accessories diagram.The characters in brackets (a) correspond to the characters in fig. 4 of ‘Controls and connections’. Caution! Always switch off the projector before making any connections. PAL, NTSC,...

Connecting to audio equipment Note: The characters in brackets (a) correspond to the characters in fig. 4 of ‘Controls and connections’. Caution! Always switch off the projector before making any connections.Always turn down the volume control of the connected amplifierbefore switching it on, to pre...

Connecting to an external monitor Note: The characters in brackets (a) correspond to characters in fig. 4 of ‘Controls and connections’. Caution! Always switch off PC, external monitor and projector beforemaking any connections. 1. Connect the Data out terminal of the computer to the Data interminal...

Preparation General1. Press the Stand by On button to switch on the projector. – The lamp indicatorflashes green and thestart up screen appearsfor several seconds. – When the averagelamplife time has almostexpired and less than 100 hours remain, themessage ‘Warning:lamplife has almostexpired’ will b...

2. Use Cursor Control leftand/or right to move thecursor to any other itemin the menu bar. 3. Select the sub menu itemto be adjusted usingCursor Control up and/ordown. 4. Adjust the selected itemin the action window atthe bottom of the screen,using Cursor Control leftand/or right. 5. Select the next...

Note: A (audio)/ V (video) -mute can only be selected with the AV mute button on the projector or on the remote control.A/V mute then appears on the screen. For example: The following adjustments procedures follow a slightlydifferent sequence of actions, or may need some furtherexplanation. Pan To v...

Mirror The projector can be used in various positions with respect tothe viewers and the projection screen. With the Mirror functionthe picture can be displayed in a way that is suitable for aspecific application. Rear screen projection The image can be flipped to a horizontal mirror image of theinp...

Other Settings The projector is equipped with the following functions tooptimize its use and handling: Start-up screen This function allows you to display or suppress the defaultPhilips start-up screen upon the projector’s start up. 1. Press Menu. – The menu bar appears on the screen. 2. Use Cursor ...