Paxar 6094 - Manuals - manualsarea.com

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; Save These Instructions; WARNING; The 6094 charger is for charging PATHFINDER; General Safety Precautions; Do not expose the charger to rain or snow.

IMPORTANT SAFETY INSTRUCTIONS Save These Instructions This manual contains important safety and operatinginstructions for the 6094 charger. Before using the 6094charger, please read all instructions and caution markings on: ✓ the charger. ✓ the battery handle. ✓ the printer. WARNING The 6094 charger...

Page 4 - ii

3. Do not use an extension cord unless absolutelynecessary. If an extension cord is used, make sure ✓ the wire is 18 gauge or larger. ✓ the pins on the plug of the extension cord are the samenumber, size, and shape as those of the plug on thecharger. ✓ the extension cord is properly wired and in goo...

Page 5 - Table of Contents; iii

Table of Contents 1. Overview................................................................................1 Charging Time ................................................................ 1Convenience Features ................................................... 2 2. Installing the Charger ...........

Page 6 - iv

Page 7 - Charging Time; NOTE: Battery handles with a higher capacity rating will take

1. Overview The 6094 charger is a "fast charge" accessory for charging andstoring PATHFINDER battery handles. There are four chargingstations on the charger. Each station charges independently,which means you can attach battery handles at anytime. Charging Time Charging time varies depending...

Page 8 - Convenience Features; Additional features are:

Convenience Features Additional features are: • switchable power supply which lets you select 100, 120,220, or 240 VAC for your operating area. • charging status indicator light for each charging station. • replaceable fuses. Familiarize yourself with the different parts of the 6094 charger. Fuse Bo...

Page 9 - Installing the Charger; set the power supply for the voltage in your area.; Setting the Power Supply; Unplug the power cord.

2. Installing the Charger The charger may be mounted to the wall or set on a sturdytable. Before installing the charger ✓ set the power supply for the voltage in your area. ✓ select a location for wall mounting or table top use. ✓ perform the power on test. Setting the Power Supply When you first re...

Page 10 - CAUTION; Using a screwdriver, pull the power selector straight out.

4. Carefully pull the fuse box straight out. Fuses areattached, so be careful not to drop or jolt the fuses. CAUTION Make sure you are using the correct fuses for the voltageyou select. 5. Using a screwdriver, pull the power selector straight out. 6. Rotate the power selector to the setting required...

Page 11 - Wall Mount Installation; To install the charger, you will need hardware appropriate for

Wall Mount Installation To install the charger, you will need hardware appropriate for • the wall surface. • the weight of the charger with 4 handles(approximately 9.8 lb/4.4 kg). • screws no larger than No. 10 wood screw. 1. Select a location within 6 feet of an electrical outlet. Usethe bracket of...

Page 12 - Power On Test; GREEN power light is on.

Power On Test Whenever you turn the power on, the charger will go through aself-test cycle which takes a few seconds. During this test,you’ll see the status indicators flash in the following sequence: 1. GREEN power light is on. 2. Each station, starting with station one, flashes GREEN to RED. 3. Al...

Page 13 - Check the power light to make sure the power is on.

3. Charging Handles To begin charging... 1. Check the power light to make sure the power is on. 2. Slide the battery handle completely into the chargingstation. PowerLight ChargingStation StatusIndicator PowerSwitch 7

Page 15 - Problems and Solutions; International Customers contact your Pitney Bowes or

4. Troubleshooting This chapter includes common problems which may occur andinstructions for replacing the fuses. Problems and Solutions This section helps you correct some problems that mayoccur. If you cannot fix a problem, please contact MonarchService. U.S. Customers call TOLL FREE 1-800-231-770...

Page 17 - Replacing Fuses; If the fuses need replacing, you’ll need:

Replacing Fuses If the fuses need replacing, you’ll need: • 1A fuses for 120V and 100V. ...or... • .5A fuses for 220 and 240V. When the charger is facing you, the fuse box is located on theleft side of the charger beside the power switch. 1. Turn the power OFF and unplug the power cord. 2. Use the t...

Page 18 - Specifications; Height

Specifications Dimensions: Height 5.67 inches (14.4 cm) Width 9.21 inches (23.4 cm) Depth 3.94 inches (10 cm) Weight (with cord) 7 lb (3.2 kg) Power: Internal switchable power supply (100, 120, 220, 240 VAC/ 50 Hz. nominal) Replaceable dual fusing 1A fuses (Monarch part #PB02282108) for 100 and 120 ...

Page 20 - For supplies, service or assistance call:

Published by the Technical Communications Department. Printed in U.S.A. For supplies, service or assistance call: TOLL FREE:1-800-543-6650 (In the U.S.A.)1-800-263-4650 (In Canada)www.paxar.com