Parasound HCA-2200II - Manuals

Parasound HCA-2200II – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12

Summary

Page 4 - Never move this switch while the amplifiers turned on!; Minimum Mono lmpedance; The minimum recommended load for mono is 8

Speaker connections You may use bare solid or standard wire up to AWG 12, spade lugs, banana or dual banana plugs with theHCA-2200II "5-way" terminals. The 2nd pair of terminals is for bi-wiring (see below). If you use bare wirewithout spade lugs or plugs, make sure you strip only enough wir...

Page 6 - Overheat LEDs; Maintaining your HCA-2200II

Operating the HCA-2200II Power Switch Press the upper side to turn the unit on; press the lower side to turn the unit off. Standby/Operation LEDs The red Standby LED will come on red whenever you first turn the unit on. It will light for about four to fiveseconds while the amplifier circuits are sta...

Page 8 - Parasound HCA-2200II Specifications; second

Parasound HCA-2200II Specifications Continuous Power Output - Stereo220 watts RMS x 2, 20Hz-20kHz, 8 Ω 385 watts RMS x 2, 20Hz-20kHz, 4 Ω 385 watts RMS x 2, 20Hz-20kHz, 2 Ω Continuous Power Output - Mono750 watts RMS, 20Hz-201kHz, 8 Ω 1000 watts RMS, 20Hz-20kHz, 4 Ω Current Capacity50 amperes contin...

Parasound Manuals