Paradyne FrameSaver - Manuals

Page 2 - Menu Hierarchy

2 00-16722a Menu Hierarchy Status System and Test StatusLMI Reported DLCIsPVC Connection StatusTimeslot Assignment StatusDBM Interface StatusIP Routing TablePerformance StatisticsTrap Event LogDisplay LEDs and Control LeadsIdentity Identity • System• NAM• DBM LMIReportedDLCIs • DLCI• Status• CIR (bp...

Page 5 - Frame Relay and LMI; Configuration Option; Service Level Verification; Service Level Verification; SLV Delivery Ratio

5 Frame Relay and LMI Select Frame Relay and LMI to configure the general frame relay options for thesystem. Frame Relay and LMI Configuration Option Settings Default in [Bold] LMI Behavior [Independent], Port-1_Follows_Net1-FR1,Port-2_Follows_Net1-FR1,All_Ports_Follow_Net1-FR1Net1-FR1_Follows_Port-...

Page 6 - General; Physical; Network

6 General Select General to configure a timeout period and duration for user-initiated loopbacksand pattern tests, a primary and secondary clock source for the system, and a systemalarm relay. General Configuration Option Settings Default in [Bold] Test Timeout [Enable], Disable Test Duration (min) ...

Page 7 - Data Ports

7 Data Ports Select Data Ports, then Physical to configure physical characteristics for the portconnected to the DTE. Data Ports Configuration Option Settings Default in [Bold] Port Status [Enable], Disable Port Use (Port-2 only) [Frame Relay], Synchronous Data For Port-1 or when Port Use is set to ...

Page 8 - ISDN; ISDN BRI; ISDN PRI

8 ISDN Select ISDN, then Physical to configure physical characteristics for the ISDN interface ifan ISDN DBM is installed. The following table shows the configuration options for an ISDN BRI DBM. ISDN BRI Configuration Option Settings Default in [Bold] Interface Status Enable, [Disable] Originate or...

Page 9 - ISDN Link Profiles; Link Profiles

9 ISDN Link Profiles Select ISDN, then Link Profiles to configure the ISDN Link Profiles. Link Profiles Configuration Option Settings Default in [Bold] Link Name ASCII text entry, [HQ_Site] Link Status Auto, [Disable] Outbound Phone Number 0 – 9, *, #, <space>, _ , –, ), or ( Inbound Calling I...

Page 10 - Time Slot Assignment; Frame Relay-to-Network Interface Time Slot Assignment; Time Slot Discovery; Sync Data Port-to-Network or DSX-1 Interface Time Slot Assignment; Assign To

10 Time Slot Assignment Select Time Slot Assignment to make cross-connection assignments. Select Frame Relay Network Assignments to assign DS0s on the T1 networkinterface(s) for frame relay links. Frame Relay-to-Network Interface Time Slot Assignment Network Channel Settings Default in [Bold] Time S...

Page 11 - Frame Relay

11 Frame Relay Select Frame Relay to configure the Frame Relay characteristics of the followinginterfaces: H Network H Data Ports Frame Relay Configuration Option Settings Default in [Bold] LMI Protocol lnitialize_From_Net1FR1,Initialize_From_Interface, Auto_On_LMI_Fail, Standard, Annex-A, Annex-D [...

Page 12 - DLCI Records; DLCI Records for Each Interface

12 DLCI Records Select DLCI Records to manually configure DLCI records for each interface. TheAuto-Configuration feature provides automatic configuration of DLCI records. Select DLCI Records to configure the DLCI Records for the following interfaces: H Network H Data Port H ISDN The Auto-Configurati...

Page 13 - PVC Connections; Management and Communication

13 PVC Connections Select PVC Connections to manually configure the logical connections between theselected interface and the data ports. The Auto-Configuration feature providesautomatic configuration of PVC connections. PVC Connections Configuration Option Settings Default in [Bold] Source Link Por...

Page 14 - Node IP; Management PVCs

14 Node IP Select Node IP to configure support of the IP communication network. Node IP Configuration Option Settings Default in [Bold] Node IP Address 001.000.000.000 – 223.255.255.255, [Clear] Node Subnet Mask [000.000.000.000] – 255.255.255.255, Clear Default IP Destination [None], Modem, COM, PV...

Page 15 - General SNMP Management; Telnet and FTP Sessions

15 General SNMP Management Select General SNMP Management to configure the FrameSaver unit so it can bemanaged as an SNMP agent. General SNMP Management Configuration Option Settings Default in [Bold] SNMP Management [Enable], Disable Community Name 1 ASCII text entry, [Public], Clear Name 1 Access ...

Page 16 - SNMP NMS Security; SNMP Traps

16 SNMP NMS Security Select SNMP NMS Security to configure access to the unit. SNMP NMS Security Configuration Option Settings Default in [Bold] NMS IP Validation Enable, [Disable] Number of Managers [1] –10 NMS n IP Address 001.000.000.000 – 223.255.255.255, [Clear] Access Type [Read], Read/Write S...

Page 17 - Communication Port

17 Communication Port Select Communication Port to configure the FrameSaver unit’s COM port. Communication Port Configuration Option Settings Default in [Bold] Port Use [Terminal], Net Link When Port Use is set to Terminal: Data Rate (Kbps) 9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2 Character Length...

Page 18 - Modem Port; Auto Backup Criteria

18 Modem Port Select Modem Port to configure the FrameSaver unit’s Modem port. Modem Port Configuration Option Settings Default in [Bold] Port Use [Terminal], Net Link When Port Use is set to Terminal: Dial-In Access [Enable], Disable Login Required Enable, [Disable] Port Access Level [Level-1], Lev...