Page 2 - Notice; Document Feedback
A June 2004 8900-A2-GB20-30 Copyright © 2004 Paradyne Corporation.All rights reserved.Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into ...
Page 3 - Contents; About This Guide; About the ATM Line Cards
8900-A2-GB20-30 June 2004 i Contents About This Guide Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . iii Document Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Product-Related Documents . . . . . . . . . . . . . . . . . ...
Page 4 - ii
Contents ii June 2004 8900-A2-GB20-30 Adding a Port-to-Port Cross Connection . . . . . . . . . . . . . . . . . . . . 3-12 Adding a Slot-to-Slot Cross Connection . . . . . . . . . . . . . . . . . . . . 3-14 Configuring ATM Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Document Purpose and Intended Audience; Document Summary; Section
8900-A2-GB20-30 June 2004 iii About This Guide Document Purpose and Intended Audience This guide contains information needed to configure and operate the Models 8955-B1, 8965-B2, 8968-B1, and 8985-B2 ATM line cards, and is intended for installers and operators. Basic installation information can be ...
Page 6 - iv; Product-Related Documents; Document Number Document Title
About This Guide iv June 2004 8900-A2-GB20-30 Product-Related Documents Complete documentation for this product is available online at www.paradyne.com . Select Support → Technical Manuals . To order a paper copy of a Paradyne document, or to speak with a sales representative, please call 1-727-530-...
Page 7 - ATM Line Cards
8900-A2-GB20-30 June 2004 1-1 1 About the ATM Line Cards ATM Line Cards The 8955, 8965, 8968, and 8985 Asynchronous Transfer Mode (ATM) Line Cards are circuit boards mounted in an 8620 or 8820 Broadband Access Concentrator (BAC) and used to transport ATM cells at high speeds over a single twisted-pa...
Page 8 - ATM Line Card Features; Device and test monitoring.; ATM Features; Multiple virtual circuits.; Endpoint Support Features
1. About the ATM Line Cards 1-2 June 2004 8900-A2-GB20-30 ATM Line Card Features The ATM Line Cards have these standard features: Alarm indication. Activates front panel LEDs. Diagnostics. Provides lamp test and SHDSL line loopback (8985). Device and test monitoring. Provides the capability of...
Page 9 - Automatic rate adaptation.; Sample Network Configurations; Endpoint with Voice Interfaces
1. About the ATM Line Cards 8900-A2-GB20-30 June 2004 1-3 Model 6381 and 6390 Modem support. Models 8955, 8965, and 8968 line cards support the Model 6381 Modem. The Model 8955 line card also supports the discontinued Model 6390 Modem. Model 8300 Modem support. The Model 8985 line card supports ...
Page 10 - SNMP Management Capabilities; Management Information Base (MIB) Support
1. About the ATM Line Cards 1-4 June 2004 8900-A2-GB20-30 SNMP Management Capabilities The ATM Line Cards support SNMP Version 1, and can be managed by Paradyne’s GrandVIEW ® or any industry-standard SNMP manager. Management Information Base (MIB) Support For a detailed description of supported MIBs...
Page 11 - Accessing the SCP Card Web Interface; Introduction; Logging Into the Web Interface; Procedure
8900-A2-GB20-30 June 2004 2-1 2 Accessing the SCP Card Web Interface Introduction The ATM line cards can be configured and monitored using: The SCP card’s Command Line Interface (see the 8620 and 8820 Broadband Access Concentrator Command Line Interface Reference ) or TL1 interface (see the 8620 a...
Page 12 - Configuration; Help Button
2. Accessing the SCP Card Web Interface 2-2 June 2004 8900-A2-GB20-30 4. Click on the Configuration menu tab. The configuration screens available in the contents frame depend on the types of line cards and type of SCP card installed in the chassis. The Configuration - SHDSL Port screen is displayed ...
Page 13 - Configuration Using the Web Interface; Overview
8900-A2-GB20-30 June 2004 3-1 3 Configuration Using the Web Interface Overview This chapter provides instructions on how to configure the ATM line cards using the SCP card’s web interface. Configuring Spectrum Management Use the Configuration - DSL General screen to enable and disable Spectrum Manag...
Page 14 - Field
3. Configuration Using the Web Interface 3-2 June 2004 8900-A2-GB20-30 Configuring ReachDSL Ports (8955) Use the Configuration - DSL Port screen to set parameters for a DSL port on the 8955 ReachDSL line card. Procedure To configure a ReachDSL port: 1. Select a Port from the drop-down list and click...
Page 22 - Creating Alarm Threshold Profiles for Model 8985
3. Configuration Using the Web Interface 3-10 June 2004 8900-A2-GB20-30 Creating Alarm Threshold Profiles for Model 8985 Procedure To create an alarm threshold profile for an SHDSL line card: 1. Click on Create New Profile. The Alarm Threshold Profile Create screen appears. 2. Enter or select the fo...
Page 24 - Configuring Cross Connections; Default Mappings
3. Configuration Using the Web Interface 3-12 June 2004 8900-A2-GB20-30 Configuring Cross Connections Use the Configuration - Cross Connect screen to establish or delete Virtual Channel Connections (VCCs) by port or by slot. Connections may be established between any combination of: Subtended port...
Page 27 - Slot
3. Configuration Using the Web Interface 8900-A2-GB20-30 June 2004 3-15 For example, if: Start Slot is 1 and End Slot is 2 Slot VPI and VCI are 0 and 35 SCP VPI and Start VCI are 2 and 32 The VCCs created have the following VPI,VCI values: Slot SCP Card Slot 1 Port 1 0,35 → 2,32 Port 2 0,35 → ...
Page 29 - Configuring Traffic Profiles
3. Configuration Using the Web Interface 8900-A2-GB20-30 June 2004 3-17 Configuring Traffic Profiles Use the Configuration - Profile Traffic Descriptor screen to define, modify, and delete ATM traffic profiles. To create a traffic profile: 1. On the Configuration - Profile Traffic Descriptor screen,...
Page 31 - Monitoring; What to Monitor; Location of ATM Line Card Information (1 of 2)
8900-A2-GB20-30 June 2004 4-1 4 Monitoring What to Monitor This chapter presents information on how to monitor unit status and assess performance. Table 4-1, Location of ATM Line Card Information , shows on which web interface screens you can find information useful in reporting and diagnosing probl...
Page 35 - Diagnostics; Lamp Test
8900-A2-GB20-30 June 2004 5-1 5 Diagnostics Overview The ATM line cards provide the following diagnostic tools: Lamp Test on page 5-1 — Tests the front panel LEDs on a line card. Loopback Test (Model 8985 Only) on page 5-2 — Performs Loopback test on the SHDSL span of the network for Model 8985 ...
Page 37 - Maintenance Procedures
8900-A2-GB20-30 June 2004 6-1 6 Maintenance Procedures Overview This chapter provides instructions on how to perform miscellaneous maintenance procedures: Uploading and Downloading a Configuration on page 6-2 Downloading and Switching Firmware on page 6-4 Restarting the Line Card on page 6-5
Page 39 - Resetting the Configuration to Default Settings; Resetting the Configuration to Downloaded Settings; Any
6. Maintenance Procedures 8900-A2-GB20-30 June 2004 6-3 Resetting the Configuration to Default Settings Procedure To reset the running configuration to the default settings: 1. In the Configuration Reset box, click on Reset to Factory Defaults. Any configuration options you have modifed are replaced...
Page 40 - Downloading and Switching Firmware; Downloading Firmware; Firmware Download Parameters
6. Maintenance Procedures 6-4 June 2004 8900-A2-GB20-30 Downloading and Switching Firmware Use the System - Firmware screen to upgrade firmware or switch versions of firmware in the chassis. The SCP card has two banks of firmware: the running firmware and alternate firmware. When firmware is downloa...
Page 41 - Switching Firmware; Restarting the Line Card
6. Maintenance Procedures 8900-A2-GB20-30 June 2004 6-5 Switching Firmware Procedure To switch between the firmware currently running and alternate firmware stored in the unit: 1. Verify that the Running Firmware and Alternate Firmware displayed in the Firmware box are different versions. 2. Click o...
Page 43 - Connector Pin Assignments; Port
8900-A2-GB20-30 June 2004 A-1 A Connector Pin Assignments 8620 and 8820 Telco Connector Pinouts For 24-port line cards, the Telco 50-pin connectors on the back of the 8620 BAC chassis (numbered 1–3) and the 8820 BAC chassis (numbered 1–18) provide the 2-wire loop interface from each DSL port to eith...
Page 44 - Model 8968 Line Card Telco Connector Pinouts
A. Connector Pin Assignments A-2 June 2004 8900-A2-GB20-30 Model 8968 Line Card Telco Connector Pinouts The Telco 50-pin connectors on the faceplate of the Model 8968 line card provide the 2-wire loop interface from each DSL port to either the POTS splitter shelf or, if the loop is not being shared ...
Page 45 - Technical Specifications; ATM Line Card Technical Specifications (1 of 2)
8900-A2-GB20-30 June 2004 B-1 B Technical Specifications Table B-1. ATM Line Card Technical Specifications (1 of 2) Specifications Criteria* Size Length: 25.4 cm (10 in) Height: 31.1 cm (12.3 in) Width: 2.0 cm (0.8 in) Weight Model 8955 Model 8965 Model 8968 Model 8985 0.9 kg (2.0 lbs) 0.6 kg (1.4 l...
Page 46 - ATM Line Card Technical Specifications (2 of 2)
B. Technical Specifications B-2 June 2004 8900-A2-GB20-30 Line Code Model 8955 Models 8965 and 8968 Model 8985 ReachDSL ANSI (ANSI T1.413-1998)G.dmt (ITU G.992.1)G.lite (ITU G.992.2)ADSL2 (ITU G.992.3)ADSL2+ (ITU G.992.5) G.shdsl (ITU G.991.2) DSL Line Rates Model 8955 Models 8965 and 8968 Model 898...
Page 47 - Index; Numerics
8900-A2-GB20-30 June 2004 IN-1 Index Numerics 8955 alarm threshold profiles, 3-8configuring ports, 3-2description, 1-1line profiles, 3-6 8965 alarm threshold profiles, 3-8configuring ports, 3-3description, 1-1line profiles, 3-6 8968 alarm threshold profiles, 3-8configuring ports, 3-3connectors, A-2d...