Paradyne 9128 standalone - Manuals

Contents 9000-A2-GB31-00 December 2002 iii 4 Feature-Specific Configuration n Setting Up an External Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 n Setting Up an Internal Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Setting Up Call Directories for ...

9000-A2-GB31-00 December 2002 v About This Guide Purpose and Intended Audience This document lists and describes the configuration options of the following FrameSaver SLV CSU/DSUs and routers running firmware release 2.1 or above: 9123, 9126, 9128 standalone, 9128 carrier-mount, 9520, 9520-ILM, 9623...

About This Guide vi December 2002 9000-A2-GB31-00 Product-Related Documents Complete Paradyne documentation for this product is available at www.paradyne.com . Select Support → Technical Manuals → FrameSaver Frame Relay Devices . Document Number Document Title The FrameSaver SLV reference library co...

About This Guide 9000-A2-GB31-00 December 2002 vii To order a paper copy of this or any of the above documents: n Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396) n Outside the U.S.A., call 1-727-530-8623 9783-A2-GN11 FrameSaver DSL 9783 Router Installation Instructions 9788-A2-GN10 Framesave...

About This Guide viii December 2002 9000-A2-GB31-00 Conventions Used Convention Used When Used Italic To indicate variable information (for example, DLCI nnnn , where nnnn denotes a 4-digit number) . Menu sequence: To provide an abbreviated method for indicating the selections to be made from a menu...

9000-A2-GB31-00 December 2002 1-1 1 Configuration Procedures This chapter includes the following: n Configuration Menu n Configuration Option Areas n Accessing and Displaying Configuration Options n Changing Configuration Options n Saving Configuration Options

1. Configuration Procedures 1-2 December 2002 9000-A2-GB31-00 Configuration Menu Configuration option settings determine how the FrameSaver unit operates. Use the FrameSaver unit’s Configuration Edit/Display menu to display or change configuration option settings. Configuration options available dep...

1. Configuration Procedures 9000-A2-GB31-00 December 2002 1-3 Configuration Option Areas The FrameSaver unit arrives with configured factory default settings, which are located in the Factory Default Configuration option area. You can find the default settings for configuration options in the Config...

1. Configuration Procedures 1-4 December 2002 9000-A2-GB31-00 Accessing and Displaying Configuration Options To access and display configuration options, load (copy) the applicable configuration option set into the edit area. Procedure To load a set of configuration options for editing: 1. From the ...

1. Configuration Procedures 9000-A2-GB31-00 December 2002 1-5 Changing Configuration Options Procedure To change configuration option settings: 1. From the Configuration Edit/Display menu, select a set of configuration options and press Enter. For example: Configuration → PVC Connections 2. Select t...

1. Configuration Procedures 1-6 December 2002 9000-A2-GB31-00 Saving Configuration Options When changes to the configuration options are complete, use the Save function key to save your changes to either the Current, Customer, or Scratchpad configuration areas. Note that the Scratchpad configuration...

9000-A2-GB31-00 December 2002 2-1 2 Basic Configuration This chapter includes the following: n Using the Easy Install Feature on page 2-2 n Using RIP with FrameSaver SLV CSU/DSUs on page 2-11 n Entering System Information and Setting the System Clock on page 2-12 n Setting Up Auto-Configuration on p...

2. Basic Configuration 2-2 December 2002 9000-A2-GB31-00 Using the Easy Install Feature The Easy Install feature provides a straightforward installation menu that requires minimal configuration to get the FrameSaver unit up and running quickly, and to set up remote configuration and management via T...

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-3 Easy Install Screen Example – DDS Interface Easy Install Screen Example – DSL Interface To remotely access the FrameSaver unit in Frame Relay mode, use the Dedicated Network Management Link that was created during installation, using the Node ...

2. Basic Configuration 2-4 December 2002 9000-A2-GB31-00 The menu structure and selections, and the features and functions of the FrameSaver unit, are changed based upon the type of service being used. Table 2-1, Easy Install Configuration Options , describes the entries on the Easy Install screens....

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-5 DSLAM Type (9783) Possible Settings: Paradyne, Alcatel (NewBridge), PairGain, Nokia Default Setting: Paradyne Ensures interoperability with non-Paradyne DSLAMs, not just the Hotwire GranDSLAM. This option is only available from the Easy Instal...

2. Basic Configuration 2-6 December 2002 9000-A2-GB31-00 TS Access Possible Settings: None, DLCI, VPI,VCI, DLCI_on_VPI,VCI Default Setting: [Depends on model] Specifies the type of Virtual Circuit (VC) by which special troubleshooting (TS) access is provided to service providers. Display Conditions ...

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-7 Network 1 Line Framing Format (9123, 9126, 9128) Possible Settings: D4, ESF Default Setting: ESF For units with a T1 network interface, specifies the framing format for transmitted and received signals on the T1 network interface. D4 – Uses D4...

2. Basic Configuration 2-8 December 2002 9000-A2-GB31-00 DS0 Base Rate (9123, 9126, 9128) Possible Settings: Nx64 , Nx56 Default Setting: Nx64 Selects the base rate for the DS0s allocated to frame relay on the network interface. Nx64 – The base rate is 64 Kbps. Nx56 – The base rate is 56 Kbps. Netwo...

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-9 Network 1 DSL Line Rate (9783) Possible Settings: – If DSLAM Type is set to Paradyne, or if DSLAM Type is set to Nokia and Network 1 DSL Line Rate Mode is set to Fixed: 144, 192, 208, 256, 272, 384, 400, 512, 528, 768, 784, 1024, 1152, 1168, 1...

2. Basic Configuration 2-10 December 2002 9000-A2-GB31-00 Network 1 Channel (9720) Possible Settings: B1, B2 Default Setting: B1 Specifies the B channel used for data transfer when the line rate is 64 kbps. Display Conditions – Network 1 Channel appears only when Network 1 Operating Rate is set to 6...

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-11 Using RIP with FrameSaver SLV CSU/DSUs Using the system’s standard Routing Information Protocol (RIP) feature, routing information is passed to the router over the management PVC, so the router can learn routes to FrameSaver devices. Node IP ...

2. Basic Configuration 2-12 December 2002 9000-A2-GB31-00 Entering System Information and Setting the System Clock Select System Information to set up or display the general SNMP name for the unit, its location, and a contact for the unit, as well as to set the system clock. Main Menu → Control → Sy...

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-13 Setting Up Auto-Configuration The auto-configuration feature is available in frame relay mode on all models except those with DSL interfaces. It allows you to select a method of automatic configuration and connection of DLCIs within the Frame...

2. Basic Configuration 2-14 December 2002 9000-A2-GB31-00 Selecting a Frame Relay Discovery Mode When a Frame Relay Discovery Mode is active, the FrameSaver unit “discovers” network DLCIs from the network LMI status response message. It configures a network DLCI and a user data port DLCI, and automa...

2. Basic Configuration 9000-A2-GB31-00 December 2002 2-15 NOTE: If the default setting (1MPort or 1PPort) is not the setting required for your application, change the Frame Relay Discovery Mode before connecting the network cable or editing discovered option settings. Otherwise, the FrameSaver unit ...

2. Basic Configuration 2-16 December 2002 9000-A2-GB31-00 When a Frame Relay Discovery Mode is changed and saved, the Saving will cause Auto-Configuration to update and Restart. Are you sure? prompt appears. No is the default for this prompt. n If Yes (y) is entered, the Delete All DLCIs and PVC Con...

9000-A2-GB31-00 December 2002 3-1 3 Configuration Options This chapter includes the following: n Configuring the Overall System on page 3-3 n Configuring Physical Interfaces on page 3-17 n Assigning Time Slots/Cross Connections on page 3-50 n Configuring PPP for an Interface on page 3-63 n Manually ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-3 Configuring the Overall System The System menu options are explained in the following sections: n Configuring Frame Relay and LMI for the System (CSU/DSUs) n Configuring PPP Options n Configuring Class of Service Definitions n Configuring Se...

3. Configuration Options 3-4 December 2002 9000-A2-GB31-00 LMI Behavior (continued) Net1-FR1_Follows_Port-1 – Brings LMI down on the network interface when LMI on Port-1 goes down, disabling the network interface and deasserting its control leads. When LMI on Port-1 comes back up, the network interf...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-5 LMI Behavior (9783 and 9788) Possible Settings: Independent, Net1-FR1_Follows_Port-1, Port-1_Follows_Net1-FR1, Port-1_Codependent_with_Net1-FR1 Default Setting: Port-1_Codependent_with_Net1-FR1 For units that support ATM, configures the stat...

3. Configuration Options 3-6 December 2002 9000-A2-GB31-00 LMI Status Enquiry (N1) Possible Settings: 1, 2, 3, 4, . . . 255 Default Setting: 6 Configures the LMI-defined N1 parameter, which sets the number of status enquiry polling cycles that the user side of the LMI initiates before a full status ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-7 Configuring PPP Options PPP options are selected from the System menu (see Table 3-2, PPP Options ). The option appears only when Service Type is PPP. Main Menu → Configuration → System → PPP Table 3-2. PPP Options PPP Possible Settings: Ind...

3. Configuration Options 3-8 December 2002 9000-A2-GB31-00 Configuring Class of Service Definitions Select Class of Service Definitions from the System menu to display or change the Class of Service definitions to be used with latency, availability, and throughput measurements of IP traffic on IP En...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-9 8. Select Save, then select PgDn or PgUp. The Class of Service Definitions page reappears. In the Code Points Assigned column next to your selected name there is now a Y for Yes. 9. If latency and availability should be measured for the sele...

3. Configuration Options 3-10 December 2002 9000-A2-GB31-00 Code Point Definitions Select Class of Service Definitions from the System menu, then PgDn or PgUp, to display or change the Code Point definitions for a Class of Service ID. See Configuring Class of Service Definitions on page 3-8 for inst...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-11 Configuring Service Level Verification Options SLV options are selected from the System menu (see Table 3-5, Service Level Verification Options ). Main Menu → Configuration → System → Service Level Verification Table 3-5. Service Level Veri...

3. Configuration Options 3-12 December 2002 9000-A2-GB31-00 SLV Delivery Ratio Possible Settings: Enable, Disable Default Setting: Disable Determines whether communication of Frame and Data Delivery Ratios (FDR/DDR) between FrameSaver SLV devices is enabled. To use this capability, both ends of all ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-13 SLV Round Trip Latency Error Threshold (ms) Available Settings: 50, 51, 52, . . . 10000 Default Setting: 10000 Specifies the number of milliseconds that must be exceeded before an SLV Latency Threshold alarm event is declared and backup, if...

3. Configuration Options 3-14 December 2002 9000-A2-GB31-00 Configuring General System Options Select General from the System menu to configure the general system configuration options (see Table 3-6, General System Options ). Main Menu → Configuration → System → General Table 3-6. General System Op...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-15 Secondary Clock Source Possible Settings: Net1, DSX, Internal, DBM Default Setting: Internal Provides a secondary clock source when the primary clock source fails. The source selected for this configuration option provides all of the timing...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-17 Configuring Physical Interfaces Characteristics for physical interfaces are explained in the following sections: n Configuring the Network Interface n Configuring a User Data Port (CSU/DSUs) n Configuring the T3 User Port (9520-ILM) n Confi...

3. Configuration Options 3-18 December 2002 9000-A2-GB31-00 T1 Network Interface FrameSaver Models 9123, 9126, and 9128 have a T1 network interface. Table 3-7. T1 Network Physical Interface Options (1 of 4) Line Framing Format Possible Settings: D4, ESF Default Setting: ESF Specifies the framing for...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-19 Transmit Timing Possible Settings: System, Interface Default Setting: System Allows transmit timing to be selected from either the system master clock source or from the currently selected interface. System – Transmit timing is derived from...

3. Configuration Options 3-20 December 2002 9000-A2-GB31-00 Network Initiated DCLB Possible Settings: Disable, V.54_&_ANSI Default Setting: V.54_&_ANSI Allows the initiation and termination of the Data Channel Loopback (DCLB V.54 Loop 2) to be controlled by the receipt of a DCLB-actuate or D...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-21 Excessive Error Rate Threshold Possible Settings: 10E-4, 10E-5, 10E-6, 10E-7, 10E-8, 10E-9 Default Setting: 10E-4 Sets the error rate threshold that determines when an EER condition is declared. The excessive error rate is determined by the...

3. Configuration Options 3-22 December 2002 9000-A2-GB31-00 T3 Network Interface FrameSaver Models 9520 and 9520-ILM have a T3 network interface. Table 3-8. T3 Network Physical Interface Options Circuit Identifier Possible Settings: ASCII Text Entry , Clear Default Setting: blank Identifies the tran...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-23 DDS Network Interface FrameSaver Models 9623 and 9626 have a DDS network interface. Table 3-9. DDS Network Physical Interface Options (1 of 2) Transmit Timing Possible Settings: Internal, Receive Default Setting: Receive Specifies the unit’...

3. Configuration Options 3-24 December 2002 9000-A2-GB31-00 Network Initiated DCLB Possible Settings: Disable, V.54_&_ANSI Default Setting: V.54_&_ANSI Allows the initiation and termination of the Data Channel Loopback (DCLB V.54 loop 2) to be controlled by the receipt of a DCLB-actuate or D...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-25 IDSL Network Interface FrameSaver Model 9720 has an IDSL network interface. Table 3-10. IDSL Network Physical Interface Options Operating Rate Possible Settings: AutoRate, 64, 128, 144 Default Setting: AutoRate Specifies the IDSL line rate....

3. Configuration Options 3-26 December 2002 9000-A2-GB31-00 SDSL Network Interface The FrameSaver DSL 9783 CSU/DSU and Router have an SDSL network interface. Table 3-11. SDSL Network Physical Interface Options Line Rate Mode Possible Settings: Hunt, AutoRate, Fixed Default Setting: AutoRate Specifie...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-27 SHDSL Network Interface The FrameSaver DSL 9788 CSU/DSU and Router have an SHDSL network interface. Table 3-12. SHDSL Network Physical Interface Options (1 of 2) Line Rate Mode Possible Settings: AutoRate, Fixed Default Setting: AutoRate Sp...

3. Configuration Options 3-28 December 2002 9000-A2-GB31-00 Synchronous Network Interface FrameSaver Models 9820-2M and 9820-8M have an EIA-530-A network interface. PSD Mask Possible Settings: Symmetric Default Setting: Symmetric Read-only. Specifies the Power Spectral Density (PSD) mask the unit wi...

3. Configuration Options 3-30 December 2002 9000-A2-GB31-00 HSSI Network Interface FrameSaver Model 9820-45M has a HSSI network interface. Table 3-14. HSSI Network Data Port Physical Interface Options Monitor DSR Possible Settings: Enable, Disable Default Setting: Enable Specifies whether the state ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-31 Configuring a User Data Port (CSU/DSUs) Select Physical from the Data Ports menu to display or change the physical characteristics of the data port connected to the DTE. Main Menu → Configuration → Data Ports → Physical See: n Table 3-15, V...

3. Configuration Options 3-36 December 2002 9000-A2-GB31-00 EIA-530-A/X.21/V.35 Data Port Physical Interface FrameSaver Models 9788, 9820-2M, and 9820-8M have an EIA-530-A data port that can be adapted for use as an X.21 or V.35 data port. Network Initiated Data Channel Loopback (9128) Possible Sett...

3. Configuration Options 3-38 December 2002 9000-A2-GB31-00 HSSI Data Port Physical Interface FrameSaver Model 9520 has two HSSI data ports, and Model 9820-45M has one. Monitor RTS Possible Settings: Enable, Disable Default Setting: Enable Specifies whether the state of the Request To Send (RTS) cir...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-41 Configuring the T3 User Port (9520-ILM) Select Physical to display or change the physical characteristics of the user data port connected to the DTE (see Table 3-18, T3 User Port Physical Interface Options ). Main Menu → Configuration → T3 ...

3. Configuration Options 3-48 December 2002 9000-A2-GB31-00 Setting Up ISDN Link Profiles (9126, 9128, 9626) For models with ISDN backup capability, select ISDN Link Profiles from the ISDN menu to set up the ISDN Link Profiles (see Table 3-22, ISDN Link Profile Options ). Main Menu → Configuration →...

3. Configuration Options 3-50 December 2002 9000-A2-GB31-00 Assigning Time Slots/Cross Connections The Time Slot Assignment/Cross Connect feature provides an easy method of assigning time slots for frame relay data and creating cross-connections to the synchronous data interface. The system allows y...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-51 Assigning Time Slots to the Network Interface Before assigning network time slots for use by frame relay traffic, configure the Network physical and Frame Relay options (if needed), then allow Time Slot Discovery to autodetect and assign th...

3. Configuration Options 3-52 December 2002 9000-A2-GB31-00 For easy movement between screens, select the DSXAssign function key to go directly to the DSX-1 to Network Assignments screen. Time Slot Assignment Rule: Valid network time slots are either Available or contain a Frame Relay Link 1 assignm...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-53 DSX-1 to Network Time Slot Assignment Screen Example (Page 1) Page 2 of 2 is for defining signaling assignments and trunk conditioning for each DSX-1 interface time slot. See DSX-1 Signaling Assignments and Trunk Conditioning (Page 2) on pa...

3. Configuration Options 3-54 December 2002 9000-A2-GB31-00 Procedure 1. Follow this menu selection sequence: Configuration → Time Slot Assignment → DSX-to-Network Assignments The DSX-1 to Network Assignments screen appears. This screen contains a matrix of the current cross-connect status of all ti...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-55 Only those DSX-1-to-Network assignments from page 1 are displayed on this page, from left to right and top to bottom in ascending order, by network and time slot. When a CGA condition (LOS, OOF, or AIS) is declared for a T1 interface, the s...

3. Configuration Options 3-58 December 2002 9000-A2-GB31-00 Assigning a Synchronous Data Port to Network or DSX-1 Time Slots For a FrameSaver SLV unit with two data ports, another assignment screen is available. Use the Sync Data Port Assignment screen to view the status of: n All DS0 assignments on...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-59 For easy movement between screens, select the FrAssign function key to go directly to the Frame Relay Network Assignments screen or the DSXAssign function key to go to the DSX-1 to Network Assignments screen. Time Slot Assignment Rules: n T...

3. Configuration Options 3-60 December 2002 9000-A2-GB31-00 Configuring Frame Relay for an Interface Select Frame Relay from the interface’s menu to display or change the Frame Relay options for an individual interface (see Table 3-25, Interface PPP Options ). Frame Relay is not an option on the Net...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-63 Configuring PPP for an Interface Select PPP from the interface’s menu to display or change the PPP options for an individual interface (see Table 3-25, Interface PPP Options ). PPP is not an option on the Network or Data Ports menus unless ...

3. Configuration Options 3-64 December 2002 9000-A2-GB31-00 Manually Configuring DLCI Records The Auto-Configuration feature automatically configures DLCI Records and their PVC Connections. DLCI Records can also be created manually (see Table 3-26, DLCI Record Options ). Main Menu → Configuration → ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-65 DLCI Type Possible Settings: Standard, Multiplexed, IP Enabled Default Setting: For user data port DLCIs: Standard For network interface DLCIs: Multiplexed Specifies whether the DLCI is standard or multiplexed. This field is read-only when ...

3. Configuration Options 3-66 December 2002 9000-A2-GB31-00 Committed Burst Size Bc (Bits) Possible Settings: CIR, Other Default Setting: CIR Specifies whether the DLCI’s committed burst size will follow the CIR, or whether it will be entered independently. This value is the maximum amount of data t...

3. Configuration Options 3-68 December 2002 9000-A2-GB31-00 Configuring Circuit Records for the Network Interface For Models 9783 and 9788, circuit records can be created or modified and PVCs can be created based on existing DLCIs using the Network Circuit Records screen. Main Menu → Configuration →...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-71 Configuring ATM for the Network Interface For Models 9783 and 9788, select ATM from the Network menu to display or change ATM option settings (see Table 3-28, Network ATM Options ). Main Menu → Configuration → Network → ATM Table 3-28. Netw...

3. Configuration Options 3-72 December 2002 9000-A2-GB31-00 Configuring PVC Connections The Auto-Configuration feature automatically configures PVC Connections and their DLCI Records. PVC Connections can also be created manually (see Table 3-29, PVC Connection Options ). Main Menu → Configuration → ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-73 Source EDLCI Possible Settings: 0 – 62 Default Setting: Initially blank; no default. Specifies the source Embedded Data Link Connection Identifier (EDLCI) for a frame relay interface when a multiplexed DLCI record is selected as one end of ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-75 Alternate Destination EDLCI Possible Settings: 0 – 62 Default Setting: Initially blank; no default. Specifies the alternate destination Embedded Data Link Connection Identifier (EDLCI) for a frame relay interface when a multiplexed DLCI rec...

3. Configuration Options 3-76 December 2002 9000-A2-GB31-00 Configuring the IP Path List Select IP Path List (Static) from the Configuration Edit/Display menu to display or change the list of static path IP addresses explicitly defined in the unit. Main Menu → Configuration → IP Path List (Static) T...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-77 Setting Up Management and Communication Options Management and Communications options are explained in the following sections: n Configuring Node IP Information n Configuring Management PVCs n Configuring General SNMP Management n Configuri...

3. Configuration Options 3-78 December 2002 9000-A2-GB31-00 Configuring Node IP Information Select Node IP to display, add, or change the information necessary to support general IP communications for the node (see Table 3-31, Node IP Options ). When deploying units to remote sites, minimally config...

3. Configuration Options 3-80 December 2002 9000-A2-GB31-00 Management MTU Size Possible Settings: 90 – 1500 Default Setting: 1500 Specifies the Maximum Transmission Unit (MTU) for management traffic transmitted on standard DLCIs, EDLCIs, IP tunnels, and Payload Management circuits. 90 – 1500 – Spec...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-81 TS Management SNMP Validation Possible Settings: Enable, Disable Default Setting: Disable Specifies whether validation of community strings and IP addresses is performed for this management link. Display Conditions – This option only appear...

3. Configuration Options 3-82 December 2002 9000-A2-GB31-00 Configuring Management PVCs Select Management PVCs to define inband management links by adding or changing Management PVCs (see Table 3-32, Management PVC Options ). First, DLCI records must have been configured for the interface where the ...

3. Configuration Options 3-84 December 2002 9000-A2-GB31-00 Primary Link Possible Settings: Net1-FR1, Port- n , Rtr-S0, ISDN Link Name , Clear Default Setting: Initially blank; no default. Specifies the frame relay interface to use for this management PVC. The interface selected must have at least o...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-85 Primary EDLCI Possible Settings: 0 – 62 Default Setting: Initially blank; no default. Specifies the EDLCI number used for a management PVC when a multiplexed DLCI is selected. EDLCIs identify individual connections within multiplexed DLCIs ...

3. Configuration Options 3-86 December 2002 9000-A2-GB31-00 Alternate Link Possible Settings: Net1-FR1, Port- n , ISDN Link Name , Clear Default Setting: Initially blank; no default. Specifies the frame relay interface to use for this management PVC as the alternate link. The interface selected must...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-87 Encapsulation Possible Settings: Routed Default Setting: Routed This read-only field specifies that the IP encapsulation used is RFC 1490/RFC 2427 routed Network Level Protocol IDentifier (NLPID) encapsulation, and not SubNetwork Access Pro...

3. Configuration Options 3-88 December 2002 9000-A2-GB31-00 Configuring General SNMP Management Select General SNMP Management to add, change, or delete the information needed to allow the FrameSaver unit to be managed as an SNMP agent by the NMS supporting the SNMP protocols (see Table 3-33, Genera...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-89 Configuring Telnet and/or FTP Session Support Telnet and FTP options control whether a Telnet or FTP (File Transport Protocol) session is allowed through an interconnected IP network and the access security applicable to the session. Two Te...

3. Configuration Options 3-92 December 2002 9000-A2-GB31-00 Configuring SNMP NMS Security Select SNMP NMS Security from the Management and Communication menu to display, add, or change SNMP security configuration options for the FrameSaver unit to set up trap managers (see Table 3-35, SNMP NMS Secur...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-93 Configuring SNMP Traps and Trap Dial-Out Select SNMP Traps from the Management and Communication menu to configure SNMP traps and dial-out when a trap is generated (see Table 3-36, SNMP Traps and Trap Dial-Out Options ). Main Menu → Configu...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-99 Configuring Ethernet Management Select Ethernet Management from the Management and Communication menu, or Ethernet Management Options Screen from the Easy Install screen, to configure the Ethernet port (see Table 3-37, Ethernet Management O...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-101 Configuring the Communication Port Select Communication Port from the Management and Communication menu to display or change the communication port configuration options (see Table 3-38, Communication Port Options ). Main Menu → Configurat...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-103 Port Access Level Possible Settings: Level-1, Level-2, Level-3 Default Setting: Level-1 Specifies level of user access privilege for an asynchronous terminal connected to the COM port. If a login is required for the port, the effective acc...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-105 Configuring the Modem Port Select Modem Port from the Management and Communication menu to configure the modem port (see Table 3-39, Modem Port Options ). Main Menu → Configuration → Management and Communication → Modem Port Link Protocol ...

3. Configuration Options 9000-A2-GB31-00 December 2002 3-109 Configuring the Criteria for Automatic Backup For units with an ISDN DBM, follow this menu selection sequence to specify whether and when automatic backup is allowed, and to configure timers that will control and terminate backup, or set d...

4. Feature-Specific Configuration 4-2 December 2002 9000-A2-GB31-00 Setting Up an External Modem A standard EIA-232-D crossover cable can be used to connect the COM port to an external modem. The external modem must be configured so it is compatible with the FrameSaver unit. Procedure To configure a...

4. Feature-Specific Configuration 9000-A2-GB31-00 December 2002 4-3 Setting Up an Internal Modem Models 9126, 9128, 9520, 9520-ILM, 9626, and 9820-45M have an internal modem for dial-in access to the menu-driven user interface, as well as dial-out capability when an SNMP trap is generated. When the ...

4. Feature-Specific Configuration 4-4 December 2002 9000-A2-GB31-00 4. Save the phone number(s). Setting Up to Use the Modem PassThru Feature Dial-in access to the router is possible via the Modem PassThru feature, also known as the Router Assist feature. The FrameSaver unit’s COM port must be conne...

4. Feature-Specific Configuration 9000-A2-GB31-00 December 2002 4-5 Setting Up Dial Backup When configuring units with ISDN backup capability, the following guidelines apply: n Central site configuration guidelines: — Set up the ISDN DBM physical interface. — If a BRI DBM, change the Automatic Backu...

4. Feature-Specific Configuration 4-8 December 2002 9000-A2-GB31-00 NOTE: When DLCIs, PVC connections, and management PVCs for the first ISDN Link Profile have been configured manually, it is recommended that specific discovered DLCIs, PVC connections, and management PVCs be deleted manually via the...

4. Feature-Specific Configuration 9000-A2-GB31-00 December 2002 4-9 Modifying ISDN Link Profiles Once an ISDN Link Profile is configured using the Automatic Backup Configuration feature, phone numbers and Calling IDs need to be entered. FrameSaver units with ISDN backup capability can originate or a...

4. Feature-Specific Configuration 4-10 December 2002 9000-A2-GB31-00 Restricting Automatic Backup and Configuring Backup Timers You can specify when auto backup is allowed to occur. If backup is restricted and a backup is active when the allowed time for backups is over, then the backup is terminate...

4. Feature-Specific Configuration 4-12 December 2002 9000-A2-GB31-00 PVC Backup Over the Network Interface Generally, backup can be performed on the network interface’s frame relay link using a backup PVC, as well on an ISDN link; the unit does not have to have the ISDN DBM feature. In this case, cr...

9000-A2-GB31-00 December 2002 IN-1 Index Numerics 1MPort mode auto-configuration, 2-14 1Port mode auto-configuration, 2-14 1PPort mode auto-configuration, 2-14 2MPorts mode auto-configuration, 2-14 A Access Level Port, 3-103, 3-106Session, 3-90 Name, 3-88remote, 2-3TS, 2-6Type, 3-93 Action on Networ...