Paradyne 8411-A1-000 - Manuals

Page 2 - October; Product Documentation Online

2 October 2003 8400-A2-GZ40-10 Product Documentation Online Complete documentation for this product is available at www.paradyne.com . Select Support → Technical Manuals → Hotwire DSL Systems. Select the following documents: 8400-A2-GB20 Hotwire Shelf Concentration and Processing (SCP) Card User’s G...

Page 3 - Installing the SCP Card; Procedure; SCP Card LEDs; Slot A

8400-A2-GZ40-10 October 2003 3 Installing the SCP Card SCP cards can be installed in: Slot A, Slot B, or both, of the 8820 GranDSLAM Slot A of the 8620 GranDSLAM Procedure To install the Hotwire SCP Card in a GranDSLAM chassis: 1. If there is a filler plate covering the slot, remove it. 2. Remov...

Page 4 - Installing Two SCP Cards in the Same DSLAM; – The OC3 ports of the two SCP cards are connected to the same; Dual Link; – Automatic switching occurs in the event of failure, but the SCP; Load Sharing; – Both SCP cards are active, and connected to different uplink

4 October 2003 8400-A2-GZ40-10 Installing Two SCP Cards in the Same DSLAM Two SCP cards may be installed in one DSLAM to provide redundancy or load sharing. There are three basic configurations for paired SCP cards: Y-Cable – The OC3 ports of the two SCP cards are connected to the same uplink devi...

Page 5 - DS3 Uplink; and fasten them with cable ties.

8400-A2-GZ40-10 October 2003 5 DS3 Uplink SCP cards with a DS3 uplink have two BNC jacks: one for the transmit direction and one for the receive direction. To cable an SCP card with an DS3 uplink: 1. Connect the input cable to the RX jack on the faceplate of the SCP card. 2. Connect the output cable...

Page 6 - OC3 Uplink; Remove the plastic dustcover from the SFP socket.

6 October 2003 8400-A2-GZ40-10 OC3 Uplink SCP cards with an OC3 uplink use an SFP transceiver that accepts an LC-type connector. To cable an SCP card with an OC3 uplink: 1. Remove the plastic dustcover from the SFP socket. 2. Insert the LC connector of your fiber optic cable into the SFP socket. 3. ...

Page 7 - IMA Uplink; Assignments, on page 12; Cable Tie

8400-A2-GZ40-10 October 2003 7 IMA Uplink SCP cards with an IMA uplink have an RJ45M-type 50-position connector with eight Tip/Ring and eight Tip1/Ring1 connections that conforms to ANSI T1.403-1999. The following splitter cables are available: Feature Number 8026-F1-001 for the Model 8416 SCP car...

Page 8 - Type; or

8 October 2003 8400-A2-GZ40-10 SCP Card LEDs The following table describes the meaning and states of the LEDs on the Hotwire SCP card faceplate. Example faceplates are shown at left. Type LED LED is . . . Indicating . . . SYSTEM Active Green,Slow-cycling Green, On Off This SCP card is the active car...

Page 9 - Using the Default Management Address; Setting the Management Address Using the CLI; To use the default management address:

8400-A2-GZ40-10 October 2003 9 Using the Default Management Address The SCP card uses Transaction Language 1 (TL1) language for Command Line Interface (CLI) commands and messages. The CLI can be used to configure and maintain the system, but the web interface is recommended. You can access the web i...

Page 10 - The management address can be set using the CLI.; To set the management address of the SCP card using the CLI:

10 October 2003 8400-A2-GZ40-10 Setting the Management Address Using the CLI The management address can be set using the CLI. Procedure To set the management address of the SCP card using the CLI: 1. Using the supplied cable and DB9 adapter, connect a PC with a terminal emulation program to the SERI...

Page 11 - Using the Web Interface

8400-A2-GZ40-10 October 2003 11 Using the Web Interface To access the web interface: Procedure 1. Open your web browser. (Internet Explorer Version 6 or above is recommended.) 2. Type http:// and the IP address of the SCP card into the Address field of your browser window. This is 10.10.10.10 by def...

Page 12 - BNC Jacks; The following table; IMA Interface Pin Assignments; Table 2

12 October 2003 8400-A2-GZ40-10 BNC Jacks The following table shows the connections for BNC jacks (Model 8411). IMA Interface Pin Assignments Table 2 lists connector pin assignments for Model 8416, and the Model 8417 when used with modular connectors for a 120-ohm E1 connection. Table 3 lists connec...

Page 13 - Data In; Function

8400-A2-GZ40-10 October 2003 13 Port 5 39 5 Data Out (Tip) 14 4 Data Out (Ring) 38 2 Data In (Tip) 13 1 Data In (Ring) Port 6 42 5 Data Out (Tip) 17 4 Data Out (Ring) 41 2 Data In (Tip) 16 1 Data In (Ring) Port 7 45 5 Data Out (Tip) 20 4 Data Out (Ring) 44 2 Data In (Tip) 19 1 Data In (Ring) Port 8 ...

Page 15 - Equipment List; Table 4. Feature Numbers; Cards

8400-A2-GZ40-10 October 2003 15 Equipment List The following feature numbers may be used to order SCP cards, line cards, and related cables. Table 4. Feature Numbers Description Feature Number Cards SCP Card: DS3 8411-A1-000 SCP Card: OC3/STM1 Multimode Fiber 8412-A1-000 SCP Card: OC3/STM1 Single Mo...

Page 16 - SCP Card Technical Specifications; Specifications

16 October 2003 8400-A2-GZ40-10 SCP Card Technical Specifications Table 5. SCP Card Technical Specifications (1 of 2) Specifications Criteria Size Length: 10.4 inches (26.42 cm) Height: 11.15 inches (28.32 cm) Width: 1.0 inches (2.54 cm) Weight Approximately 1.7 lbs. (0.76 kg) Approvals Safety Certi...

Page 17 - Important Safety Instructions; OC3 Uplink Specifications

8400-A2-GZ40-10 October 2003 17 Important Safety Instructions The OC3 configuration of the SCP circuit card has provisions for the customer to install Class 1 laser transceivers to provide optical coupling to the telecommunications network. Once a Class 1 laser is installed, the equipment is conside...

Page 18 - Visit the Paradyne World Wide Web site at; Document Feedback; . Include the number and; Trademarks; Copyright

18 October 2003 8400-A2-GZ40-10 Warranty, Sales, Service, and Training Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty, sales, service, repair, installation, documentation, traini...