Paradyne 6350-A4 - Manuals

Paradyne 6350-A4 – Manual in PDF format online.

Manuals:

Manual

Manual Paradyne 6350-A4

Summary

Page 2 - Hotwire ReachDSL System; Network

2 Hotwire ReachDSL System Copper pairs run from the central office (CO) to the customer premises (CP) to create the local loop. The local loop terminates on the customer premises at the demarcation point. NOTES: In this document: — A telephone is used to represent any equipment that plugs into a pho...

Page 3 - Document Title; Customer

3 Phone Filter Depending on the type of phone handset and the quality of the home or business wiring, a phone filter is recommended to minimize background noise during a phone conversation. An internal phone filter is included with the Hotwire 6350 ReachDSL Modem. If additional telephones are used o...

Page 4 - Getting Started; Package Checklist; Installing the Hotwire 6350 ReachDSL Modem

4 Getting Started Before beginning your modem’s installation, make sure that you have all the equipment that you need. Package Checklist Verify that your package contains the following: ❑ Hotwire 6350 ReachDSL Modem ❑ DSL interface cable with RJ11 connectors ❑ Power cord with power transformer Be su...

Page 5 - Procedure; If a telephone is connected at the RJ11

5 Installing the Hotwire 6350 ReachDSL Modem Place the Hotwire 6350 ReachDSL Modem on a flat surface with clearance for the rear connectors. Procedure 1. If a telephone is connected at the RJ11 wall jack where the modem will be installed, unplug the telephone line from the wall jack. 2. Connect a te...

Page 6 - – or–

6 4. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET. — Use a straight-through cable and connect the other end to an Ethernet hub. (To connect to a hub’s Uplink connection, use an Ethernet crossover cable). – or– — Use an Ethernet c...

Page 7 - transformer into an AC outlet.; Power

7 5. Insert the supplied power cord’s round end into the jack labeled POWER. Plug the transformer into an AC outlet. The ReachDSL modem hardware installation is now complete. When the power cord is installed, the ReachDSL modem goes through a power-on self-test. Power-On When power is applied, the R...

Page 8 - Status LEDs; Troubleshooting; LED

8 Status LEDs All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below. Refer to Troubleshooting on page 9 for LED indications requiring action. LED Condition Status PWR ON ReachDSL modem ha...

Page 9 - LED Symptom; Installing the Hotwire 6350 ReachDSL

9 Troubleshooting LED Symptom Action All LEDs are on. If LEDs remain on after ten minutes, the modem is not functional. Contact the service provider. ALM LED remains on. The power-on self-test may have failed. Unplug the unit and reapply power. If the alarm LED is still on, contact the service provi...

Page 10 - Phone Filter; Increasing the Number of End-User Systems

10 To improve data transmission throughput and minimize background noise during a telephone conversation, make sure that: The Hotwire 6350 ReachDSL Modem is always powered on, even when not in use, and A Hotwire phone filter is installed on every telephone on the same line as the Hotwire 6350 Re...

Page 11 - PHONE Jack Pinouts

11 Cables & Connectors This section is reference information. Standard twisted-pair CAT3 or better cables are recommended. The LINE and PHONE interface connectors use 6-pin, non-keyed modular plugs. RJ11 or RJ14 6-pin connectors can be used. Line & Phone Connectors The LINE and PHONE jac...

Page 13 - Optional ReachDSL Modem Wall Placement; ReachDSL Modem; Use a drill to install the plastic anchors.

13 Optional ReachDSL Modem Wall Placement The Hotwire 6350 ReachDSL Modem is designed for tabletop placement. The modem can also be mounted on a wall. To mount the modem, you will need: ❑ Two slotted-head #6 self-threading screws with plastic anchors ❑ Drill and 3/16" drill bit for the plastic a...

Page 14 - ReachDSL Modem Hardware Template; To

14 ReachDSL Modem Hardware Template 5.10 01-17014 To p Bottom

Page 15 - Item

15 Technical Specifications for Hotwire 6350 ReachDSL Modem Item Specification* Height x Width x Depth 1.46 " x 5.72 " x 4.33 " (3.71 cm x 14.54 cm x 11.00 cm) Weight 0.45 lb. (0.20 kg) Power Class 2 Transformer normal service input voltage range Input: 100 VAC (+10%), 50 Hz; 120 VAC (+1...

Page 16 - Important Safety Instructions; included in the manual.

16 Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and...

Page 18 - Declaration of Conformity; Hotwire

18 Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: Trade Name: Hotwire Model Number: 6350-A4-200 This device...

Page 19 - Supplier’s Declaration of Conformity; Place of Issue: Paradyne Corporation; located at the above address, hereby certifies that the Hotwire

19 Supplier’s Declaration of Conformity Place of Issue: Paradyne Corporation 8545 126 th Avenue North Largo, FL 33773-1502USA Date of Issue: 8/17/2001 Paradyne Corporation, located at the above address, hereby certifies that the Hotwire ® ReachDSL™ Model Number 6350-A4-200, bearing labeling identifi...

Page 20 - Government Requirements; United States – Notice to Users of the Telephone Network; The user is not authorized to repair or modify the equipment.

20 Government Requirements Certain governments require that instructions pertaining to connection to the telephone network be included in the installation and operation manual. Specific instructions are listed in the following sections. United States – Notice to Users of the Telephone Network 1. Thi...

Page 21 - Notice to Users of the Canadian Telephone Network; If your equipment is in need of repair, refer to

21 8. This equipment cannot be used on public coin service provided by the telephone company. Connection to Party Line Service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporation commission for information.) 9. An FCC compliant telephon...