Paradyne 3161 DSU - Manuals

Page 3 - Quick Start Procedure; ACCULINK 316x Data Service Unit/Channel Service Unit

TM 1 ACCULINK 3161 DSU/CSUQuick Reference Document Number 3161-A2-GL11-40 February 1998 Quick Start Procedure The following procedure is for experienced DSU/CSU users who are familiar with the3161 DSU/CSU installation process and have no special requirements for theirapplication. See the ACCULINK 31...

Page 4 - Turn on the power to the 3000 Series Carrier.

2 3. Attach the network cable to the Auxiliary Backplane using either a 50-pin cable or the T1 Network Interface Adapter. Connect the other end of the network cable tothe connection provided by the telephone company. 496-14386-03 Auxiliary Backplane over Slots 9–16 COMSPHERE 3000 Series Carrier (Rea...

Page 5 - configuration procedures in Chapter 3,

3 5. Insert the DSU/CSU circuit card into the appropriate slot in the carrier. The power-up self-test begins. 495-14797 6. If you intend to use front panel emulation, connect the cable from the PC to Port 2 on the Auxiliary Backplane using the COM port adapter and COM-port-to-PC cable. 7. If you do ...

Page 6 - Configuration Options

4 Configuration Options Configuration options are accessed from the Cnfig branch of the front panel menu. DSU ESF Stat 97-15577 DevHS STest Perf TStat LED ID T1 Prtn Prtn User Telco Cur 24Tot Intvl Far Near Cur 8Tot Intvl Test Rlpbk Lpbk Ptrns Lamp QRSS 511 Abort Mon LLBUP LLBDN 54UP 54DN FT1UP FT1D...

Page 7 - Table 1. DTE Interface Configuration Options

5 Table 1. DTE Interface Configuration Options Option Factory 1 Factory 2 Comments/Description DTE Port: Enab Enab Enables the use of the DTE DTE Port: Disab Disab Enables the use of the DTEDrop/Insert port. DTE Framing: D4 D4 Selects D4 or ESF framing format DTE Framing: ESF ESF Selects D4 or ESF f...

Page 9 - Table 3. Network Interface Configuration Options

7 Table 2. Port Configuration Options (3 of 3) Option Comments/Description Factory 2 Factory 1 Far end: Disab Disab Specifies whether the device willmaintain far end performance Far-end: Maint Maint p maintain far-end performancestatistics. Mgmt Link: Enab Enab Specifies whether the EDL Mgmt Link: D...

Page 10 - Table 4. DTE Drop/Insert Port Channel Configuration Options

8 Table 4. DTE Drop/Insert Port Channel Configuration Options Line 1 Displays: Line 2 Displays: Meaning Comments/Description — Unassigned N1 N2 N3 ...... N24: D1, D2 ... D24 Channelassigned to thisDTE channel Function key under the channel(N1, N2, etc.) selects the DTEchannel to assign (D1, D2, ... ...

Page 13 - Table 6. General Configuration Options

11 Table 6. General Configuration Options Option Factory 1 Factory 2 Comments/Description Gen Yellow: Enab Enab Yellow alarm is generated by the Gen Yellow:(Generate Yellow) Disab Disab Yellow alarm is generated by theDSU/CSU on LOS, LOF, or AIS. NET NET DTE DTE Selects the clock source to be Clock ...

Page 19 - Table 10. Management Trap Configuration Options

17 Table 10. Management Trap Configuration Options Option Factory 1 Factory 2 Comments/Description Num Trap Mgrs: 1 2–6 1 2–6 The number of trap managerssupported by the device. Trap n IP Adr: Edit Edit Specifies the IP address for eachtrap manager. This configuration Trap n IP Adr: Clear Clear trap...