Paradyne 1810 - Manuals

Paradyne 1810 – Manual in PDF format online.

Manuals:

Manual

Manual Paradyne 1810

Summary

Page 2 - Notice; Document Feedback

Copyright 2005 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer langua...

Page 3 - VoIP Gateway settings; d, the voltage potential may

1810 VoIP Gateway User’s Guide VoIP Gateway settings LAN port IP: 192.168.1.101 None WAN port PVC: Phone 1x URI- sip: [email protected] Preface This manual is designed to provide information to network administrators. It covers the installation, operation and applications of the VOIP Gateway. Import...

Page 4 - CE Marking; Reorient or relocate the receiving antenna.

1810 VoIP Gateway User’s Guide CE Marking When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at www.paradyne.co m. Select Support -> Technical Manuals -> Declarations of Conformity. ...

Page 5 - Table of Contents; LED

1810 VoIP Gateway User’s Guide Table of Contents CHAPTER 1 INTRODUCTION................................................................................................................. 7 1.1 P RODUCT O VERVIEW .............................................................................................

Page 6 - This page intentionally blank.

1810 VoIP Gateway User’s Guide This page intentionally blank. 6

Page 7 - Chapter 1; Product Overview; Uses an ordinary telephone to make Internet calls free of charge; Applications

1810 VoIP Gateway User’s Guide Chapter 1 Introduction This chapter introduces the 1810 VOIP Gateway. It includes a product overview, description of the product’s features and applications, and an explanation of the front panel LED indicators. 1.1 Product Overview The 1810 VoIP Gateway provides predi...

Page 8 - Front Panel LED Indicators; Color

1810 VoIP Gateway User’s Guide 1.4 Front Panel LED Indicators WA N PHONE POWER 05-17624 LED Indicator Color Mode Function On A power connection is established. POWER Green Off No power connection is established. On The WAN link is established. WAN Green Off The WAN link is not established. On Phone ...

Page 9 - Chapter 2; Internet; POWER jack; Reset Button

1810 VoIP Gateway User’s Guide Chapter 2 Hardware Installation The figure below illustrates the back panel of the gateway. Power Cable 05-17623 Power WAN Phone DSL Modem DSL LAN Port Telephone Cable (RJ11) Telephone Internet 1 2 3 1. Connect the power adapter to the POWER jack of the device, and the...

Page 10 - Chapter 3

1810 VoIP Gateway User’s Guide Chapter 3 Installing and Starting PCTool You can configure and manage the gateway using the provided PCTool application. To install and run PCTool: 1. Connect the WAN port of the gateway to the Network Interface Card (NIC) of your PC using the supplied Ethernet cable. ...

Page 11 - Chapter 4; Upon startup of PCTool the screen below is displayed.

1810 VoIP Gateway User’s Guide Chapter 4 Status Upon startup of PCTool the screen below is displayed. 11

Page 12 - Chapter 5; Click on the Connection Mode tab to configure the connection mode.; Connection Modes; There are three connection modes:; PPPoE; The; Refresh; button refreshes the screen, and the; Close; button closes the application.

1810 VoIP Gateway User’s Guide Chapter 5 Configuration Click on the Connection Mode tab to configure the connection mode. 5.1 Connection Modes There are three connection modes: PPPoE DHCP Fixed IP The Refresh button refreshes the screen, and the Close button closes the application. 12

Page 13 - and

1810 VoIP Gateway User’s Guide 5.1.1 PPPoE To configure PPPoE as the connection mode, select it on the left side of the screen. Then enter the User name , Password and Confirm Password parameters. User name: Enter the required user name. Password: Enter your new password (letters are case sensitive)...

Page 14 - Apply; to

1810 VoIP Gateway User’s Guide 5.1.2 DHCP To configure DHCP as the connection mode, select it on the left side of the screen and click on Apply to submit the settings. 14

Page 15 - To configure

1810 VoIP Gateway User’s Guide 5.1.3 Fixed IP To configure Fixed IP as the connection mode, select it on the left side of the screen. Then enter the IP Address , Subnet Mask , Default Gateway and DNS (Domain Name Server) parameters . IP Address: Enter your fixed IP address as given to you by your In...

Page 16 - Chapter 6; Proxy Server; SIP; tab. The following screen is displayed.

1810 VoIP Gateway User’s Guide Chapter 6 SIP SIP, the Session Initiation Protocol, is a signaling protocol for Internet conferencing, telephony, presence, events notification, and instant messaging. It is the Internet Engineering Task Force's (IETF's) standard for multimedia conferencing over IP. It...

Page 17 - Local

1810 VoIP Gateway User’s Guide 6.1 Local To configure the local settings, click on the Local tab. Then fill in or select the parameters and click on Apply . Parameter Description Max Digits(1-14) Enter the maximum number of digits you will dial. Port No. Port number of user agent where it receives t...

Page 18 - Parameter Description; Qvalue; Call Forward

1810 VoIP Gateway User’s Guide Parameter Description Qvalue Enter a value between 0 and 1 for registering with the proxy (in case the same username is registered from a different location). Decimals are accepted, such as 0.3. In general, a larger number has higher priority for the proxy to connect t...

Page 20 - STUN; Port No

1810 VoIP Gateway User’s Guide 6.3 STUN To configure the STUN (Simple Traversal of UDP through NATs) server parameters, input the items and click on Apply. Parameter Description STUN IP or Domain Name The IP address or domain name of the STUN server. This could be provided by your service provider, ...

Page 21 - Chapter 7; Adding an Entry; To place an entry in the telephone book, click on the; Telephone Book

1810 VoIP Gateway User’s Guide Chapter 7 Telephone Book This can be used to store numbers based on Destination IP or Host Name. 7.1 Adding an Entry To place an entry in the telephone book, click on the Telephone Book tab. Then click on Add. 21

Page 23 - Deleting an Entry

1810 VoIP Gateway User’s Guide 7.2 Deleting an Entry To delete an entry, select the entry on the left side of the screen as shown below, then click on the Del button. 23

Page 24 - Chapter 8; To access this screen, click the; Tool

1810 VoIP Gateway User’s Guide Chapter 8 Tools To access this screen, click the Tool tab. 24

Page 25 - Upgrade; To enter this screen, first click on

1810 VoIP Gateway User’s Guide 8.1 Upgrade To enter this screen, first click on Tool , then Upgrade . 25

Page 26 - Diagnostic

1810 VoIP Gateway User’s Guide 8.2 Diagnostic To enter this screen, first click on Tool , then Diagnostic . To Ping a host, enter its IP Address or Host Name . Click on Submit. 26

Page 27 - System

1810 VoIP Gateway User’s Guide 8.3 System To enter this screen, first click on Tool , then System . 27

Page 28 - To save the current configuration click; Save; The following confirm prompt is displayed.; Yes

1810 VoIP Gateway User’s Guide 8.3.1 Save Current Configuration To save the current configuration click Save . The following confirm prompt is displayed. To save the changes to flash memory click Yes . 28

Page 29 - Default; The following warning prompt is displayed.; . The application will then close and

1810 VoIP Gateway User’s Guide 8.3.2 Reset To Factory Configuration To reset the gateway to its factory configuration (default settings), click on Default . The following warning prompt is displayed. If you are sure that you want to load the default settings, click on Yes . The application will then...

Page 30 - To reboot the device, click on; Reboot

1810 VoIP Gateway User’s Guide 8.3.3 Reboot Device To reboot the device, click on Reboot . The following warning prompt is displayed. If you are sure that you want to reboot the device, click on OK. The application will then close and subsequently reboot. The gateway takes about thirty seconds to st...

Page 31 - Appendix A: GLOSSARY

1810 VoIP Gateway User’s Guide Appendix A: GLOSSARY Default: The value assigned to a configuration parameter when the gateway is first powered on. DHCP: Dynamic Host Configuration Protocol. A TCP/IP protocol that lets a network connected to the Internet automatically assign a temporary IP address to...