Palsonic TFTV580 - Manuals

Palsonic TFTV580 – Manual in PDF format online.

Manuals:

Manual

Manual Palsonic TFTV580

Summary

Page 2 - Contents

Contents Important Safety Precautions ..........................................................................................................Control Panel and Back Terminals .................................................................................................. Control Panel .............

Page 3 - Important Safety Precautions

Important Safety Precautions 1 Electrical energy can perform many useful functions, but it can also cause personal injuriesand property damage if improperly handled. This product has been engineered and manufactured withthe highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRI...

Page 6 - Control Panel and Back Terminals; Control Panel; Press this button to access the Menu main page

Control Panel and Back Terminals 4 Power Indicator Remote Sensor A blue indicator lights when the power ison and a red indicator lights when in thestandby mode. Control Panel 1. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the setback to STANDBY 2. MENU Press...

Page 7 - Back Terminals; Allows you to connect cable or outdoor antenna

Control Panel and Back Terminals 5 Back Terminals 1. Antenna input Allows you to connect cable or outdoor antenna 2. Headphone jack3. AVI inputs (Video, Audio L, R) / S-Video input Receive video/audio signals from external sources such as VCR or DVD player.Receive a S-Video signal from external sour...

Page 8 - Remote Control Unit

Remote Control Unit 6 Mute Direct channelselector Channel up/downselector Stereo mode select Auto correct picture in VGA LEFT/RIGHT button: In the menu operation, adjust the selected item Access the menu Select the input signal source Previous channel Volume up/down selector Sound mode select Pictur...

Page 9 - Batteries for the Remote Control

Remote Control Unit 7 Batteries for the Remote Control If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. Open the battery cover. Insert two size-AAA batteries.(Place the batteries with their terminalscorresponding to the (+) and (-) indications...

Page 10 - Installation; Antenna Connection

Installation 8 Antenna Connection Optimum reception of colour requires a good signal and will generally mean that an outdoor aerialmust be used. The exact type and position of the aerial will depend upon your particular area. Note: It is recommended that the 75-ohm coaxial cable be used to eliminate...

Page 11 - Connecting External Device; SVIDEO

Installation 9 Connecting External Device Notes about connection 1. Carefully check the terminals for position and type before making any connections.2. Loose connectors will result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.3. When connecti...

Page 12 - The PC input signal connection; RGB; Equipment with

Installation 10 The PC input signal connection Connect the VGA (D-Sub) signal terminal on the TV to the output of PC equipment through Min D-sub15 pin cable as illustrated. Connect a cable, which matches the audio output terminal on the computer.If you select PC signal, please set the input signal s...

Page 13 - AV OUT connection; How to record the TV program:; Audio amplifier; VCR

Installation 11 AV OUT connection How to connect: Connect the video/audio output terminals on the TV set to the signal input terminals of the VCRequipment or the video/audio input terminals on other TV set through video/audio cable. Connect the audio output terminals on the TV set to the Audio ampli...

Page 14 - YPbPr/YCbCr input connection; YPbPr

Installation 12 YPbPr/YCbCr input connection If the signal/source is the equipment with YPbPr/YCbCr output terminals, we recommend you to usethe YPbPr/YCbCr terminals on the equipment. Please connect it with the YPbPr/YCbCr input terminalson the TV set for better picture quality. And connect the aud...

Page 15 - Basic Operations; Turning On; Blue Screen; Selecting Input Signal

Basic Operations 13 Turning On Connect the Power correctly. The indicator lights up, the unit is in STANDBY mode. Press the POWER ( ) button on the remote control or on the unit to turn on the TV set. Turning Off With the power on, press the POWER ( ) button to turn off the TV and the TV is in STAND...

Page 16 - Channel Setting; Auto Search

Channel Setting 14 There are two ways to preset channels: to preset channels automatically and to preset channelsmanually. Below we will describe how to preset the channels by making use of the menu. Auto Search Access Channel Setting menu. Press UP/DOWN button repeatedly to highlight auto search it...

Page 17 - Channel Selection; Using Keypad Buttons

Channel Selection 15 Using Keypad Buttons To select one-digit channel numbers : Input the channel using the 0-9 number button , then wait for about 2 seconds. To select two-digit channel numbers: Press -/-- button to display -- , then input the channel using the 0-9 number button . To select three-d...

Page 18 - Adjusting Picture and Sound; Picture Adjustment

Adjusting Picture and Sound 16 Picture Adjustment Access Picture Setting menu by pressing MENU button. Press UP/DOWN to select the item that you want to adjust. Press LEFT/RIGHT to adjust selected item. Picture Mode You can select picture mode by P.MODE button. There are four picture modes: bright ,...

Page 19 - Setting Sound Output

Adjusting Picture and Sound 17 Setting Sound Output Access Audio Setting menu. Press UP/DOWN to select sound output item. Press LEFT/RIGHT to select speaker , earphone or speaker + earphone . Adjusting Bass or Treble Access Audio Setting menu. Press UP/DOWN to select bass or treble item. Press LEFT/...

Page 20 - System Setting; Setting Blue Screen

System Setting 18 blue screen scaler mode color sys. sound sys. sleep time on off fill all Auto B/G 10 minutes Setting Blue Screen Access System Setting menu. Press UP/DOWN to select blue screen item. Press LEFT/RIGHT to select on or off . If you set this item to on, the unit displays a blue screen ...

Page 21 - Operations In RGB/YPbPr Mode; Select RGB/YPbPr mode

Operations In RGB/YPbPr Mode 19 Select RGB/YPbPr mode Press the SOURCE button on the unit or button on the remote control. The screen displays the menu shown as right. Press UP/DOWN to highlight the RGB or YPbPr item. Press LEFT/RIGHT or wait about 4 seconds and the signal source is selected. PC Sig...

Page 22 - Adjusting Phase/Frequency

Operations In RGB/YPbPr Mode 20 Adjusting Phase/Frequency Access the Picture Position menu. Press UP/DOWN to select phase or frequency item. Press LEFT/RIGHT to adjust the selected item. You may find that images blur, depending on the clock phase of your PC's Processor. If youexperience blurring , y...

Page 23 - Troubleshooting; Symptoms

Troubleshooting 21 Before calling for repair service, check the following items for possible remedies to anencountered symptom. Symptoms No power Check item Ghost or double images Check that the AC power cord is plugged into the mains socket.Unplug the power cord, wait for 60 seconds. Then reinsert ...

Page 24 - Specifications

Specifications 22 Power Supply: Power Consumption: Dimensions (mm): Weight (kg): Screen (cm): TV system & channel coverage. SYSTEM PAL-B/G Colour system: Sound output: Accessories 240V 50Hz 130W (Max.) 705(W) x 180(D) x 454(H) 11.5 58 PAL-BG, NTSC (AV) 3.5W x 2 Operation manual x 1, Power cord x...

Page 25 - PALSONIC CUSTOMER SERVICE

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L23H63-00 Ver1.0