Page 2 - Table of Contents
Table of Contents 1 Table of Contents ...........................................Important Safety Precautions .........................Preparations ................................................... Using the Remote Control ........................Batteries for the Remote Control .............Power...
Page 3 - Important Safety Precautions
Important Safety Precautions 2 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperlyhandled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CANRESULT IN POTENTIAL ELECTRI...
Page 4 - Entering of objects and liquids; equipment as this can result in a risk of fire or electric shock.; Replacement parts
Important Safety Precautions (continued) 3 13. Carefully move ---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and unevenfloor surfaces can cause the product to fall from the trolley. 15. Servicing ---Refer al...
Page 5 - EXAMPLE OF ANTENNA GROUNDING AS PER
Important Safety Precautions (continued) 4 22. Power source ---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For addedprotection for th...
Page 6 - Preparations; Using the Remote Control; Cautions regarding use of remote control; Open the battery cover.; Precautions on battery use; Batteries for the Remote Control
Preparations 5 2 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set.Objects between the remote control and sensor window may prevent proper operation. Note: the illustration is for your reference only, the remote sensor may locate differentlywi...
Page 7 - Power connection; the illustration may be different depending on model.; Speaker connection
Preparations (continued) 6 1. Connecting the female plug to the AC socket on the unit.2. Connecting the male plug to the wall outlet as illustrated. Note: This product should be operated only from the type of power source indicated on the marking label. Always unplug the AC cord from power outlet wh...
Page 8 - Antenna Connection
Preparations (continued) 7 INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on thepicture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and w...
Page 9 - Identification of Controls; VOL
Identification of Controls 8 1. SOURCE Press this button to display SOURCE select menu. 2. MENU Press this button to access the MENU main page. 3. Volume Press the VOL or VOL button to directly increase or decrease the sound volume level.In OSD Menu, press these buttons to adjust the value or settin...
Page 10 - Receives the digital video/audio signals from a set top box or PC.; Component inputs 1; Connect to the VCR input jacks to record programs.; Speaker output jacks; BOTTOM VIEW
Identification of Controls (continued) 9 1. RS232 terminal For service use only. The user cannot operate the unit through the RS232 terminals. 2. DVI input /Audio in Receives the digital video/audio signals from a set top box or PC. 3. VGA input /Audio in Connect to the VGA/audio output jacks on you...
Page 11 - Remote Control
Identification of Controls (continued) 10 1. POWER Turn the unit on or off 2. CH , VOL+/- Use to switch channels or adjust volume;In MENU operation, use CH to select menu item and VOL+/-to adjust selected item. 3. MENU To access the MENU main page 4. STILL To freeze current picture 5. ZOOM To go int...
Page 12 - Identifications of Controls
Identifications of Controls (continued) 11 To access screen layout select menu 18. PIP display To activate picture in picture To access PIP frame position select menu To access PIP frame size adjusting menu In multi-picture mode, press this button to output the sound of theselected picture frame fro...
Page 13 - Connections; instead of; To play VCR; Connect a VCR; AV
BOTTOM VIEW CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS Connections 12 Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connecto...
Page 14 - Connect a Camcorder; To playback Camcorder; SOURCE; button on the remote control.
BOTTOM VIEW CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS Connections (continued) 13 Connect a Camcorder How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder. To playback Camcorder 1. Turn on your PD...
Page 15 - How to connect a DVD Player using Component Video Connections:; Connect a DVD Player; DVD Player
BOTTOM VIEW CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS Connections (continued) 14 How to connect a DVD Player using Component Video Connections: Connect the Video cable between the Y, Cb, Cr input jacks on the unit and Y, Cb, Cr output jacks on the DVD...
Page 16 - To Watch DTV; button on the remote; ENTER; Connect a DTV receiver; DTV Receiver; Rear of the DTV receiver
BOTTOM VIEW CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS Connections (continued) 15 How to connect: Connect the cable or antenna to the antenna input jack on the DTV receiver. Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, P...
Page 17 - To Watch the PC screen; Connect a PC; source
BOTTOM VIEW CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS Connections (continued) 16 DVIcable How to connect: Connect a VGA (or DVI) cable between the VGA (or DVI) jack on the PC and the VGA (or DVI) input jack on the unit. Connect an Audio cable between ...
Page 18 - Connect a VCR (for recording) or external amplifier; External Amplifier; To record program; Rear of the VCR; VCR for recording
BOTTOM VIEW CONTROL DVI D-SUB COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT AV INPUT HEADPHONE RF SVHS Connections (continued) 17 Connect a VCR (for recording) or external amplifier External Amplifier How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and ...
Page 19 - Turning the Unit On and Off; tint
Turning the Unit On and Off 18 Turning the Unit On and Off Turning On Insert the power cord into the wall outlet.Press the Power Switch on the unit.Press the Power button on the remote control. The unit will be turned on and you will be ready to use it's features. Turning Off With the power on, Pres...
Page 20 - Memorising the Channels; Storing Channels in Memory Automatically; MENU; Manual Search; [Storing Channels in Memory; tv tuner; off; on
Memorising the Channels 19 Your PDP TV can memorise and store all of the available channels. After the available channels are memorised,use CH to scan through the available stations. Storing Channels in Memory Automatically Press MENU to display the menu main page. Press VOL+/- repeatedly to display...
Page 21 - Manual Fine Tuning; Adding and Erasing Channels; channel skip; auto fine tune; fine tune
Memorising the Channels (continued) 20 Setting Auto Fine Tune (AFT) Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page. Press CH repeatedly to select auto fine tune item. Press V OL+/- to select on or off . When the AFT is set to On, the unit will automaticall...
Page 22 - Basic Operations; Changing Channels
Basic Operations 21 Changing Channels Using the Channel Buttons (CH or CH ) Press the CH or CH to change channels. When you press the CH or CH , the unit changes channels in sequence. You will see all the channels that the unit has memorised.You will not see channels that were erased, not memorised ...
Page 23 - Select input source signal
Basic Operations (continued) 22 Select input source signal Press the SOURCE button to access source menu. Press VOL+ or VOL- to select a desired input channel. Press ENTER to confirm and the unit display signal from the selected input channel. A--------VGA, select signal from VGA (5-pin D-sub) termi...
Page 24 - Setting Channel Options; Editing Channel Label; edit labels
Setting Channel Options 23 Editing Channel Label Press MENU to display the menu main page. Press VOL+/- repeatedly to display options menu page. Press CH to select tv tuner item. Press VOL+ to enter. Press VOL+ again to display channel menu page. Press CH to select edit labels item. Press VOL+/- to ...
Page 25 - Setting Picture; Customising the Picture; The; Using the Preset Picture Mode; Picture mode
Setting Picture 24 Customising the Picture Press MENU to display the menu main page. If the picture menu does not display, press VOL+/- repeatedly to display picture menu page. Press CH to select the item you wish to change. Press VOL+/- to adjust the value of the item. Press MENU to exit. Note: The...
Page 26 - Setting System; Setting the Menu Background; Setting Current Time; menu to return; Sleep time; menu background; video format; current time
Setting System 25 Setting the Menu Background Press MENU to display the menu main page. Press VOL+/- to display settings menu page. Press CH to select menu background item. Press VOL+/- to select opaque or translucent . Setting Colour and Sound System Press MENU to display the menu main page. Press ...
Page 27 - Changing Screen Options; Changing the Scaling mode of Image; STILL
Changing Screen Options 26 Changing the Scaling mode of Image Press MENU to display the menu main page. Press VOL+/- to display window menu page. Press CH to select image size item. Press VOL+/- to select a proper image size. The image size can be selected between: fill all, normal, wideand zoom. Fi...
Page 28 - Changing the Position of the Image; Using Digital Pan and Zoom; You can quickly access Zoom menu by using the; h position; digital pan and zoom
Changing Screen Options (continued) 27 Changing the Position of the Image The unit allows you to adjust the position of the image if it is not well-aligned. Press MENU to display the menu main page. Press VOL+/- to display window menu page. Press CH repeatedly to select h position or v position item...
Page 29 - Setting Sound; Using the Preset Audio Mode; You can not access the; Customising the Sound; audio mode; headphone
Setting Sound 28 Using the Preset Audio Mode Press MENU to display the menu main page. Press VOL+/- to display audio menu page. Press CH to select Audio mode item. Press VOL+/- to select a desired Audio mode. Note: You can not access the treble and bass item unless the Audio mode is set to User . Cu...
Page 30 - Using the Auto Volume
Setting Sound (continued) 29 Using the Auto Volume Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume everytime the channel is changed. "Auto volume" lets you automatically adjust the volume of the desired channel by loweringthe sound ou...
Page 31 - Changing Screen Layout; Selecting Screen Layout; pip; Main Frame
Changing Screen Layout 30 Selecting Screen Layout Using the Layout Menu Press MENU to display the menu main page. Press VOL+/- to display layout menu page. Press CH to select item. Press VOL+ or ENTER to confirm. Using the MODE button Press the MODE button to display the screen layout select menu. P...
Page 32 - PIP; When this item is selected, the screen displays 9 scanning frames.; Split Frame
Changing Screen Layout (continued) 31 PIP When this item is selected, one main frame and one PIP framedisplay on the screen at the same time. Split Screen When this item is selected, the screen will be split into twoframes. When this item is selected, one main frame and three scanningframes display ...
Page 33 - PIP Operations; You can quickly open or close PIP frame by directly using the; Swap the Contents of the PIP Image and Main Image
PIP Operations 32 Viewing the Picture-in-Picture This unit includes a two-tuner Picture-in-Picture (PIP) feature. This allows you to watch two (2) live broadcasts atthe same time with or without an external video source such as a VCR, cable box, etc. Press MENU to display the menu main page. Press V...
Page 34 - Changing the Position of the PIP Frame; PIP frame; pip position; pip size
PIP Operations (continued) 33 Press MENU to exit. Changing the Position of the PIP Frame With the PIP frame displaying, press MENU to display the menu main page. Press VOL+/- to display window menu page. Press CH repeatedly to select pip position item. Press VOL+/- to select a desired position for t...
Page 35 - brightness; phase
Adjustment in PC (VGA) Mode 34 With working in VGA mode, this unit allows you to perform many adjustments. Adjusting Picture Press MENU to display the menu main page. If the picture menu does not display, press VOL+/- repeatedly to display picture menu page. Press CH to select brightness or contrast...
Page 37 - Adjustments in YPbPr Mode; h wide
Adjustments in YPbPr Mode 36 Changing the Scaling mode of Image Press MENU to display the menu main page. Press VOL+/- to display window menu page. Press CH to select image size item. Press VOL+/- to select a desired scaling mode. Press MENU to exit. Changing the Position of Image After connecting t...
Page 38 - Troubleshooting; Symptoms
Troubleshooting 37 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms No power Check item "Ghost" or double images Check that the AC power cord is plugged into the mains socket.Unplug the power cord, wait for 60 seconds. The...
Page 39 - Specifications; Video In
Specifications 38 1050 x 645 x 79 (Excluding Speakers) TV System PAL/SECAM/NTSC 16,777,216 Maximum Colours Brightness Contrast Viewing Angle TV Unit Dimension (WxHxD) (mm) 640 nit 1000:1 160 /160 Power Consumption Weight (kg) TV unit/TV unit with Stand 400W 32/37 (Excluding Speakers) TV Tuner & ...
Page 40 - Dimensional Drawings; Design and specifications are subject to change without notice.
Dimensional Drawings 39 1245 777 Design and specifications are subject to change without notice. (Unit: mm) 79 6 4 5 7 3 3 1050
Page 41 - PALSONIC CUSTOMER SERVICE
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-PS42D83-03
Palsonic 5179G
Manual
Palsonic VCR9688
Manual
Palsonic PRC-510
Manual
Palsonic CD6990DM3UC
Manual
Palsonic 6826G
Manual
Palsonic 8110
Manual
Palsonic 6160G
Manual
Palsonic 5115DVD
Manual
Palsonic 2418
Manual
Palsonic DVD2050DX
Manual
Palsonic PMCL-521
Manual
Palsonic COD. 30537
Manual
Palsonic 5130TS
Manual
Palsonic 5120G
Manual
Palsonic TFTV765
Manual
Palsonic TFTV2035BK
Manual
Palsonic 7118
Manual
Palsonic PMO-750
Manual
Palsonic DVD2040
Manual
Palsonic 6845PFST
Manual