Palsonic 9219SF - Manuals

Palsonic 9219SF – Manual in PDF format online.

Manuals:

Manual

Manual Palsonic 9219SF

Summary

Page 2 - Contents

Congratulations on your purchase of this Hi-VisionPalsonic colour television receiver We recommend that you thoroughly read this manual before use to fully enjoy themany functions and excellent effects of this receiver.Retain is manual in an easily accessible location for future reference.* Screen d...

Page 3 - H digital comb filter; Main features

. . PAL/NTSC/SECAM Multi-System Hyperband English/Chinese on-screen menu display Surround sound and wide - field dynamic sound system NICAM Digital Stereo/bilingual broadcasts receivable German Stereo (IGR)/bilingual broadcasts receivable Three groups of S-VIDEO/VIDEO/AUDIO input terminals and one g...

Page 4 - supply of the other type.

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

Page 5 - When the remote controller is not used for

Installation and appearance Antenna connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATVcable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please tu...

Page 6 - Speaker Connection; Connect the speaker wires to the EXT SP (8

) terminals at the rear of the TV.Red wires should be connected to the + redterminals, while black wires to the - blackterminals Speaker Connection As the figure below shows, attach the left and theright speaker to the sides of the set tightly, pushthe speaker from their top to secure them. Loosen t...

Page 7 - Appearance; Front view; SYSTEM

Appearance Front view Back view 5 Note: Functions of , MENU, VIDEO, SYSTEM, VOLUME+/-, CHANNEL are also provided to the remote controller. SYSTEM CHANNEL CHANNEL MENU VIDEO VOLUME - VOLUME +

Page 8 - The remote controller

Page 9 - Operation; after turning off the power, the last TV mode picture and sound

Operation Switching on/off Push the main power switch on, if the set is in Standby mode, the power indicator is red;If there are pictures appearing on the screen, the indicator is yellow.If no picture appears on the screen, push the power button on the remote controller toturn the set on, the indica...

Page 10 - llllllllllllll; Presetting the channels; To enter into menu; Press the MENU button to enter into the main

llllllllllllll Presetting the channels There are two ways to preset channels: to presetchannels automatically and to preset channels manually.Below we will describe how to preset the channelsby making use of the menu. 1. To enter into menu 1.1 Press the MENU button to enter into the main menu. 1.2 P...

Page 11 - VHFL

3. MANUAL SEARCH If AUTO-SEARCH cannot preset the desired channels,or you want to preset the desired channels one byone with the preferred channel numbers - please makeuse of MANUAL SEARCH. Press the menu item select button or to selectMANUAL SEARCH (the caption on the screen arered). Press the or b...

Page 13 - The setting of colour and sound system; Making use of the CH button; Making use of the button; Channel selection

6. The setting of colour and sound system Press the SYS button, the screen will display colour andsound system. If the displaying colour is abnormal, press the or buttonto select COLOUR, then press the or button to selectthe right colour system. Every time you press or button,the colour system will ...

Page 14 - Sound mode selection; Sound transmitting mode

FM mono sound two digital sound channelstransmitting dual sound two digital sound channelstransmitting dual sound one FM sound channel (The sound signal in FM channel is different from the one in NICAM channel. So when the NICAM is trans- mitting on the TV screen only displays an indicator in yellow...

Page 15 - Picture adjustment; lllllllll; Picture and sound adjustment

Press the | button, you can quickly select twomodes of picture and sound quality standard:One is standard mode ( on the screen displays(STANDARD);The other is personal select mode (on the screendisplays "MEMORY"). 1. Picture adjustment Complete the following steps and you will adjust thepict...

Page 16 - Note: During the process of picture and sound ad-

2. Sound adjustment Complete the following steps and you will adjust thesound quality. Press the MENU button to display the mainmenu. Press the or button to selectSOUND , then press the or button toenter into the sub - menu of SOUND.Press the or button to select your requiredsound adjustment item (t...

Page 17 - Adjusting the volume and muting the; llllll

3. SURROUND SOUND Making use of surround sound, you can enjoythe dynamic sound effect that is like beingin a music hall. To make use of surroundsound, complete steps 2.1, 2.2 toselect SURROUND ON, and press thebutton to select SURROUND then pressthe or button to adjust its effect. Toturn off surroun...

Page 18 - EVERY ONCE OFF EVERY; Other functions

Press the or button to select ON TIME. Pressingthe or button set ONCE/EVERY ON TIME. Everytime you press the or button , it will change in thesequence of OFF EVERY ONCE OFF EVERY ------. When the setting is ONCE or EVERY ON TIME,press the or button to select time to turn on the set,then press the or...

Page 19 - Selecting the menu language

Pressing the button set the TV into standbymode. At the preset time the TV will automaticallyturn on to preset channel. To cancel ONTIME, set ON TIME OFF. 1.3 CLOCK The built-in clock employs the 24-hour system. Do step 1.1.1 to enter into the sub-menu ofTIMER.Press the or button to select CLOCK.Pre...

Page 20 - External Equipment Connections; To Connect to AV input

External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to theowner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy thehigh quality...

Page 21 - If the colour of video input is abnormal; , the colour system setting may be incorrect. Press the; Note on the S-VIDEO terminal; TV

To select the input press the VIDEO button on the TV set or the AV button on the remotecontroller repeatedly until you see the corresponding input indication on the screen. To return toaerial input, press the AV button until it displays programme number, or press direct channelselect button or the C...

Page 22 - Troubleshooting; Symptoms

Troubleshooting Symptoms No power, red indicatoris not lit up Poor colour, poor tint Spots appear on thescreen Stripes appear on thescreen Double images or"ghosts" Snowy picture The remote controllerdoes not work The drawer of the controlbuttons opens slowly The drawer of the controlbuttons ...

Page 24 - PALSONIC CUSTOMER SERVICE

604-38783-01 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888