Palsonic 7118 - Manuals

Palsonic 7118 – Manual in PDF format online.

Manuals:

Manual

Manual Palsonic 7118

Summary

Page 2 - Main features; 70MHz all - channel CATV receiving

. . 1. Digital Color Transient Improver (CTI) Enhance the tint and make the original picture brighter and fresher 2. 3H digital comb filter To attain the complete separation of brightness and colour signals. To reduce colourinterface, blurry and dotted interruptions. To make the picture clearer. 3. ...

Page 3 - many functions and excellent effects of this receiver.; Contents

Congratulations on your purchase of this colour Hi-Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Conte...

Page 4 - supply of the other type.

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial...

Page 5 - Installation and appearance; Antenna connection

Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATVcable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please ...

Page 6 - Appearance; Front view

Appearance Front view Back view 4 VIDEO VOLUME- VOLUME+ SYSTEM CHANNEL CHANNEL MENU VIDEO 3 input terminals {S-VIDEO, VIDEO,AUDIO, L/MONO, R} MONITOR output terminals {VIDEO, AUDIOL/MONO, R} Earphone jack Antenna input VIDEO 1 input terminals {S-VIDEO, VIDEO, AUDIO, L/MONO, R} VIDEO 2 input terminal...

Page 7 - The Remote Controller

Page 8 - Operation; after turning off the power, the last TV mode picture and sound

Operation Switching on/off Push the main power switch on, if the set is in Standby mode, the power indicator is red;If there are pictures appearing on the screen, the indicator is yellow.If no picture appears on the screen, push the power button on the remote controller toturn the set on, the indica...

Page 9 - Press the or button to enter into the sub-menu of; Presetting the channels; To enter into menu; Press the MENU button to enter into the main; lllllllllllll

1.3 Press the or button to enter into the sub-menu of Presetting the channels There are two ways to preset channels: to presetchannels automatically and to preset channels manually. Below we will describe how to preset the channelsby making use of the menu. 1. To enter into menu 1.1 Press the MENU b...

Page 10 - VHFL

Press the button select SEARCH 3. MANUAL SEARCH If AUTO - SEARCH cannot preset the desired channels,or you want to preset the desired channels one byone with the preferred channel numbers - please makeuse of MANUAL SEARCH. Press the menu item select button or to selectMANUAL SEARCH (the caption on t...

Page 11 - llllllllllllll

When you want to store and memorise anotherchannel with another position, repeat steps 3.3, 3,4. 4. Skip unwanted program numbers After presetting the channels, you can skip unwanted program numbers to select your desired channels. Repeat steps 3.1 to 3.3 to select the unwanted programposition of th...

Page 12 - The setting of colour and sound system; Making use of the CH button; Channel selection

6. The setting of colour and sound system Press the SYS button, the screen will display colour andsound system. If the displaying colour is abnormal, press the or buttonto select COLOR, then press the or button to selectthe right colour system. Every time you press or button,the colour system will c...

Page 13 - Sound Selection Mode; FM MONO; Making use of the button

Sound Selection Mode If the broadcasting TV station is transmitting stereo sound in NICAM mode or IGR (stereo)mode, on the upper right comer of the screen will display an indication which is listed in thefollowing table. You can press the " " button repeatedly to select stereo sound orlangua...

Page 14 - Picture adjustment; lllllllll; Picture and sound adjustment

Press the | button, you can quickly select twomodes of picture and sound quality standard:One is standard mode (on the screen displays(STANDARD) ;The other is personal select mode (on the screendisplays "MEMORY"). 1. Picture adjustment Complete the following steps and you will adjust thepict...

Page 16 - Note: During the process of picture and; Super woofer and surround sound

Note: During the process of picture and sound adjustment, every time youpress the button, STANDARD/MEMORY is displayed on the screenalternatively. When picture and tonequality are adjusted to your desiredlevel, the mode is in memory mode. SOUND MEMORY Press or buttonto select S.WOOFER ON To make use...

Page 17 - Other functions

Press the or button to select OFF TIME. Pressingthe or button set ONCE/EVERY OFF TIME. Everytime you press the or button, it will change in thesequence of OFF EVERY ONCE OFF EVERY------. When the setting is ONCE or EVERY OFFTIME, press the or button to select time to turn off the set, then press the...

Page 18 - Selecting the menu language

Press the or button to select ON TIME.Pressing the or button set ONCE/EVERY ONTIME. Every time you press the or button , itwill change in the sequence of OFF EVERYONCE OFF EVERY......... When the setting isONCE or EVERY ON TIME, press the or but-ton to select time to turn on the set, then press the ...

Page 19 - External Equipment Connections; To Connect to AV input

External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to theowner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy thehigh quality...

Page 20 - If the colour of video input is abnormal; , the colour system setting may be incorrect. Press the; Note on the S-VIDEO terminal; TV

To select the input press the VIDEO button on the TV set or the AV button on the remotecontroller repeatedly until you see the corresponding input indication on the screen. To return toaerial input, press the AV button until it displays programme number, or press direct channelselect button or the C...

Page 21 - Troubleshooting; Symptoms

Troubleshooting Symptoms No power, red indicatoris not lit up Poor colour, poor tint Spots appear on thescreen Stripes appear on thescreen Double images or"ghosts" Snowy picture The remote controllerdoes not work The drawer of the controlbuttons opensslowly The drawer of the controlbuttons c...

Page 22 - Specifications

Specifications Power supply: Power consumption: Dimension(mm): Weight: CRT: TV system & channel range System PAL-D/K PAL-B/G PAL-I NTSC-M US SECAM-B/G SECAM-D/K VHF 1-12 2-12 2-12 2-13 2-12 1-12 A-6-A-l,A-W,AA-FFF X ~ Z + 2, S1~S4 Colour system: Sound system : Sound output: Accessories : NICAM72...

Page 23 - PALSONIC CUSTOMER SERVICE

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-76623-01