Page 2 - COMMERCIAL ICE MAKER
Thank you for choosing our ice maker . This user manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new pr...
Page 3 - INTRODUCTION; TABLE OF CONTENTS
Please take a few minutes to read this manual carefully. GENERAL INFORMATION PAGE4 Proper maintenance and operation of this machine can provide better service. INTRODUCTION SECTION 1 TABLE OF CONTENTS RECEIVING AND INSPECTION PAGE4 PRECAUTIONS FOR SAFE OPERATION PAGES6-7 SECTION 2 TECHNICAL PARAMETE...
Page 4 - GENERAL INFORMATION; RECEIVING AND INSPECTION; please note the following when sign for the receiving:; WARNING DIAGRAMS AND OPERATING
GENERAL INFORMATION 1. The production of this appliance uses advanced production technology and skilled processes, as well as the strict quality inspection, guarantees the excellent performance of the appliance. 2. The core component of the ice maker "compressor" we use well-known brand prod...
Page 5 - PRECAUTIONS FOR SAFE OPERATION; AFTER RECEIVING THE PRODUCT, PLEASE BE SURE TO USE IT AFTER 24; Some models use flammable refrigerants and flammable foaming
PRECAUTIONS FOR SAFE OPERATION ! - 6 - - 7 - AFTER RECEIVING THE PRODUCT, PLEASE BE SURE TO USE IT AFTER 24 HOURS, OTHERWISE IT WILL DAMAGE THE COMPRESSOR. Do not use the ice maker outdoor. It may cause leakage or electric shock after the ice maker is wet by rain. Do not disassemble, repair or modif...
Page 8 - PRECAUTIONS BEFORE INSTALLATION; CORRECT OPERATION; This unit is designed according to the following conditions:; INSTALLATION LOCATION; Transporting and moving conditions:
PRECAUTIONS BEFORE INSTALLATION - 12 - - 13 - CORRECT OPERATION When using the appliance for the first time or using it continuously, please follow below rules! Use an independent water source for the ice maker, and check regularly to prevent low water, fluctuations, or blocked filters. Do not store...
Page 9 - PRE-OPERATING INSTRUCTIONS; WATER CONNECTION
1. Level & flat floor: Put the ice maker on a level & flat floor, to avoid excessive vibration and noise. 2. Keep away from heat resource: Avoid locating the ice maker near hot equipment, such as gas stoves or stoves. The ice making performance will decrease when the ice maker is heated. 3. ...
Page 10 - OPERATING INSTRUCTIONS; AUTO CLEANING FUNCTION:
- 16 - - 17 - ICE-HARVEST: During the ice-harvest process, the reversing valve is opened, the ice tray will be heated, and the connection between the ice cube and the ice tray will be melted. When the ice cube cannot be attached to the ice tray due to its own weight, it will fall down and one ice-ha...
Page 11 - DIGITAL WINDOW FAULT CODE; TROUBLESHOOTING
TROUBLESHOOTING DIGITAL WINDOW FAULT CODE Fault indication: ice full light flashes quickly: ambient temperature (sensor) fault, shutdown . The ice full indicator and the water shortage indicator flash alternately: the open and closed signals of the ice full switch cannot be detected for 3 consecutiv...
Page 12 - IF HAVE STRANGE SMELL; SOUND DURING MACHINE OPERATION
The transparency of the ice cube is not very good or ice cube shape is irregular Improper adjustment of ice thickness Reset ice thickness Water quality is bad Install filter and replace filter element Ice maker water tank or the ice tray is very dirty Clean the ice maker and replace the filter Uneve...
Page 13 - CLEANING AND MAINTENANCE; MAINTENANCE; ATTENTION
CLEANING AND MAINTENANCE MAINTENANCE Please follow this manual to maintain the ice maker, in order to improve its reliability and service life. And while maintaining hygiene, avoid the increase of energy consumption coefficient for the ice production. 1. Always clean the surroundings of the applianc...
Page 14 - HOW TO STORAGE; a clean soft cloth (refer to maintenance and cleaning)
HOW TO STORAGE If the ice maker is not used for a long time, cut off the power supply and remove the remaining water from the drainage outlet. Dry the interior with a clean soft cloth (refer to maintenance and cleaning) Warning: Don’t touch the power supply with wet hands ! Don’t pull out the machin...
