OPTOMA HD66 - Manuals - manualsarea.com

Page 2 - English; Usage Notice; Safety Information; Class B emissions limits

2 English Usage Notice Safety Information The lightning fl ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to...

Page 3 - Precautions; Please follow all warnings, precautions and

3 English Usage Notice  When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 44-45. Precautions Please follow all warnings, precautions an...

Page 5 - Eye Safety Warnings; Product Features; One built-in speaker with 2 watt amplifier

5 English Usage Notice Eye Safety Warnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In...

Page 6 - Introduction; Package Overview; Unpack and inspect the box contents to ensure

6 English Introduction Power Cord .8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Documentation :  User’s Manual  Warranty Card  Quick Start C...

Page 7 - Main Unit; Product Overview

7 English Introduction EN HA NC ED W ID ES CR EE N . Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens 5. IR Receiver Main Unit Product Overview 6. Tilt-Adjustment Feet 7. Security Bar 8. Input / Output Connections 9. Power Socket 2 VGA-IN / SCART / YPbPr VGA-OUT HDMI S-VIDEO VIDEO RS-232 AUDIO-...

Page 8 - Control Panel; Four Directional Select Keys

8 English Introduction Control Panel . Power/Standby 2. Menu 3. Source 4. Enter 5. Re-Sync 6. Temp LED 7. Lamp Fail LED 8. Power LED 9. Four Directional Select Keys 0. Keystone Correction 2 6 7 8 5 0 3 4 9

Page 9 - Input / Output Connections; Lock Port

9 English Introduction Input / Output Connections . VGA-In/SCART/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/SCART/ YPbPr) 2. VGA-Out Connector (Monitor Loop-through Output) 3. HDMI Connector4. S-Video Input Connector5. Composite Video Input Connector6. RS-232 Connector (3-pin)7. Au...

Page 10 - Remote Control

0 English Introduction Remote Control . LED Indicator 2. Power On/Off 3. No function on this model 4. No function on this model 5. Four Directional Select Keys 6. Re-Sync 7. No Function on this model 8. Volume +/- 9. Zoom 0. AV mute . Video 2. VGA 3. Freeze 4. S-Video 5. HDMI 6. Brightness 7. Menu 8...

Page 11 - Installation; Connecting the Projector; Connect to Computer/Notebook

English Installation Connecting the Projector  Due to the difference in applications for each country, some regions may have different accessories.  (*) Optional accessory Connect to Computer/Notebook ....................................................................................................

Page 12 - Connect to Video Sources

2 English Installation VGA-IN / SCART / YPbPr VGA-OUT HDMI S-VIDEO VIDEO RS-232 AUDIO-IN AUDIO-OUT E62405SP R Connect to Video Sources ....................................................................................................Power Cord 2................................................*5-Pi...

Page 13 - Powering On the Projector; The fi rst time you use the projector, you can select your; Powering the projector On/Off

3 English Installation Powering On the Projector . Remove the lens cap.  2. Securely connect the power cord and signal cable. When connected, the Power LED will turn red. 3. Turn on the lamp by pressing “POWER” button either on the top of the projector or on the remote. The Power LED will now turn ...

Page 14 - Warning Indicator; flashes red), it indicates the projector has overheated. The; Powering Off the Projector; Press the “POWER” button again to confirm, otherwise

4 English Installation Warning Indicator  When the “LAMP” indicator lights red (“POWER” indicator flashes red), the projector will automatically shut down. Please call your nearest service center for assistance.  When the “TEMP” indicator lights red (“POWER” indicator flashes red), it indicates th...

Page 15 - Adjusting the Projected Image; Adjusting the Projector’s Height; The projector is equipped with elevator feet for; . Locate the adjustable foot you wish to modify on the

5 English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator feet for adjusting the image height. . Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring counter clockwise to rai...

Page 16 - Adjusting the Projector’s Zoom / Focus; Focus Ring; Adjusting Projection Image Size

6 English Installation Adjusting the Projector’s Zoom / Focus Focus Ring Zoom Ring You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.9 to 39.4 feet (.2 to 2.0 meters). Adjusting Projection Im...

Page 17 - User Controls; Control Panel & Remote Control; There are two ways for you to control the functions:; Using the Control Panel

7 English User Controls Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 3-4. MENU Press “MENU” to launch the on-screen disp...

Page 18 - Using the Remote Control

8 English User Controls HDMI Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 3-4. Confi rm your item selection. Source Press “SOURCE” to select an input signal. Re-SYNC Automatically synchronizes the projector to the input source. Four Directi...

Page 20 - The Projector has multilingual On-screen Display menus that; How to operate; On-screen Display Menus

20 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate . To open the OSD menu, press “MENU” on the Remote Control or Projector Keypad...

Page 21 - Menu Tree

21 English User Controls Menu Tree ##  ( # ) “Saturation” and “Tint” are only supported in Video mode.  ( ## ) “Signal” is only supported in Analog VGA (RGB) signal.  (*) "3D" is supported at 1280x720 resolution maximum.  (**) "3D Sync. Invert" is only available when 3D is enable...

Page 22 - IMAGE; Display Mode

22 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater.  sRGB: Standardised accurate color.  Blackboard: This mo...

Page 23 - Contrast

23 English User Controls IMAGE Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.  Press the to decrease the contrast.  Press the to increase the contrast. Sharpne...

Page 24 - Degamma; BrilliantColorTM

24 English User Controls IMAGE | Advanced Degamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input.  Film: for home theater.  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. BrilliantC...

Page 25 - Color Settings; Color; Reset; Input Source

25 English User Controls Advanced | Color Settings Color Use these settings for advanced adjustment of the individual Red, Green, Blue, Cyan, Magenta and Yellow Colors. Reset Choose “Yes” to return the factory default settings for color adjustments. Advanced | Input Source Input Source Use this opti...

Page 26 - DISPLAY; Format

26 English User Controls DISPLAY Format Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  6:0: This format is for 6×0 input sources, like HDTV and DVD enhanced for Wide screen TV.  LBX: This format is for non-6x9, letterbox source and for users wh...

Page 28 - Overscan

28 English User Controls Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Press the to magnify an image on the projection screen. H Image Shift Shift the pr...

Page 29 - Language

29 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to fi nalize the selection. SETUP | Language

Page 30 - SETUP; Projection

30 English User Controls SETUP Projection  Front-Desktop This is the default selection. The image is projected straight on the screen.  Rear-Desktop When selected, the image will appear reversed.  Front-Ceiling When selected, the image will turn upside down.  Rear-Ceiling When selected, the imag...

Page 31 - Menu Location

3 English User Controls SETUP Menu Location Choose the menu location on the display screen. Projector ID ID defi nition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page 48 for the complete list of RS232 commands. Mute  Choose the “On” to tur...

Page 32 - Phase

32 English User Controls SETUP | Signal Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or fl ickers, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer’s graphic card. Use...

Page 33 - Security; Security Timer

33 English User Controls SETUP | Security Security  On: Choose “On” to use security verification when the turning on the projector.  Off: Choose “Off” to be able to switch on the projector without password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the proj...

Page 34 - Change Password

34 English User Controls SETUP | Security Change Password  First time:. Press “ ” to set the password.2. The password has to be 4 digits. 3. Use number button on the remote to enter your new password and then press “ ” key to confirm your password.  Change Password:. Press “ ” to input old passwor...

Page 35 - Logo; Logo Capture

35 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.  Optoma: The default startup screen.  User: Use stored picture from “Logo Capture” function. Logo Capture Press “...

Page 36 - OPTIONS

36 English User Controls Source Lock  On: The projector will search specified connection port.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where ...

Page 37 - Advanced; Direct Power On

37 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “Power” key on the projector control panel or “Power” key on the remote control. Auto Power Off (min) Sets ...

Page 38 - Lamp Settings; Lamp Hours; Lamp Reminder; Brightness Mode; Lamp Reset

38 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or hide the “change lamp” warning message. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  STD: Choose “STD” to dim the project...

Page 39 - Appendices; Image Problems; No image appears on-screen; Troubleshooting; If you experience a problem with your projector,

39 English Appendices Image Problems No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely ...

Page 40 - The screen of the Notebook or PowerBook computer is not

40 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (600 × 200).  If you are using a Note...

Page 41 - Image is out of focus; The image is stretched when displaying 6:9 DVD title

4 English Appendices Image is out of focus  Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance 3.9 to 39.4 feet (.2 to 2.0 meters) from the projector. See page 6. The image is stretched when displaying...

Page 42 - Other Problems; The projector stops responding to all controls; Lamp burns out or makes a popping sound; Projector Status Indication; LED lighting message

42 English Appendices Other Problems The projector stops responding to all controls  If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power.  Check that “Keypad Lock” is not activated by trying to control the projector with the remote...

Page 43 - On Screen Messages; Remote Control Problems; If the remote control does not work

43 English Appendices On Screen Messages  Temperature warning:  Fan failed:  Lamp warning:  Out of display range: Remote Control Problems If the remote control does not work  Check the operating angle of the remote control is within ±5° both horizontally and vertically of one of the IR receiver...

Page 44 - Replacing the lamp

44 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make s...

Page 45 - Lamp Replacement Procedure:

45 English Appendices Lamp Replacement Procedure: . Switch off the power to the projector by pressing the “POWER” button. 2. Allow the projector to cool down for at least 30 minutes.3. Disconnect the power cord.4. Unscrew the two screws on the cover. 5. Lift up and remove the cover. 2 6. Unscrew the...

Page 46 - Compatibility Modes; Mode; Computer Compatibility

46 English Appendices Compatibility Modes Mode Resolution V-Sync (Hz) H-Sync (KHz) VGA 640 × 350 70 3.50 VGA 640 × 350 85 37.90 VGA 640 × 400 85 37.90 VGA 640 × 480 60 3.50 VGA 640 × 480 72 37.90 VGA 640 × 480 75 37.50 VGA 640 × 480 85 43.30 VGA 720 × 400 70 3.50 VGA 720 × 400 85 37.90 SVGA 800 × 60...

Page 47 - Video Compatibility

47 English Appendices  Video Compatibility NTSC M (3.58MHz), 4.43 MHz, 480i/p @60Hz PAL B, D, G, H, I, M, N, 576i/p @50Hz SECAM B, D, G, K, K, L SDTV/HDTV 480i/p, 576i/p, 720p@50Hz/60Hz, 080i/p@50Hz/60Hz Mode Resolution V-Sync (Hz) H-Sync (KHz) MAC LC 3” 640 × 480 66.66 34.98 MAC II 3” 640 × 480 66...

Page 48 - RS232 Pin Assignments

48 English Appendices RS232 Commands RS232 Pin Assignments Pin no. Spec. N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 Pin no. Name I/O (From Projector Side) TXD OUT 2 RXD IN 3 GND GND 1 2 3

Page 49 - RS232 Protocol Function List

49 English Appendices RS232 Protocol Function List RS232 Commands Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: Flow Control : None UART6550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F XX=00-99, projector's ID, XX=00 is for all projectors . There is a <CR> after...

Page 51 - Ceiling Mount Installation

5 English Appendices  Please note that damage resulting from incorrect installation will invalidate the warranty. Ceiling Mount Installation . To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws us...

Page 52 - Optoma Global Offices; For service or support please contact your local office.

52 English Appendices Optoma Global Offices For service or support please contact your local office. USA 75 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.com Service : [email protected] Canada 5630 Kennedy Road, Mississauga, Tel : 905-36-2582 ON, L4Z 2A9...

Page 53 - Korea; Taiwan; China

53 English Appendices Korea WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-4, Kangnam-Ku, Tel : +82+2+34430004 seoul,35-85, KOREA Fax: +82+2+34430005 Japan 東京都足立区綾瀬 3-25-8 株式会社オーエスエム E-mail : [email protected] サポートセンター : 020-46-5040 www.os-worldwide.com Taiwan 5F., No. 08, Minchiuan Rd. Tel : +886-2-228-2360 S...

Page 54 - Regulation & Safety notices; This appendix lists the general notices of your projector.; FCC notice; frequency energy and, if not installed and used in accordance; Notice: Shielded cables; Changes or modifications not expressly approved by the

54 English Appendices Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 5 of the FCC rules. These limits are designed to provide reasonabl...

Page 55 - Cet appareil numerique de la classe B est conforme a la; Disposal instructions; Do not throw this electronic device into the

55 English Appendices Operation conditions This device complies with Part 5 of the FCC Rules. Operation is subject to the following two conditions: . This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesir...