OPTOMA EH505 - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents Appendices ...................................................................................................................... 75 Troubleshooting ..........................................................................................................................75 Image Pr...

Page 3 - English; Safety Information; Class B emissions limits; Interference-Causing Equipment Regulations.; Important Safety Instruction; Do not block any ventilation openings; from flowing through its ventilation openings.; Do not use this projector near water or moisture; the risk of fire or electric shock, do not expose the projector to; Do not install near any heat sources; Liquids have spilled or objects have fallen into the apparatus.; Usage Notice

English 3 Safety Information The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The e...

Page 5 - Precautions; Warning - To reduce the risk of fire or electric shock, do not

English 5 Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s guide. ▀ ■ Warning - Do not look into the projector’s lens when the lamp is on. The bright light may damage your eyes. ▀ ■ Warning - To reduce the risk of fire or electric shock, ...

Page 7 - Eye Safety Warnings; mounting the projector rather than placing it on floor or table

English 7 Usage Notice Eye Safety Warnings ▀ ■ Avoid staring directly into the projector’s beam of light at all times. ▀ ■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀ ■ Using a stick or laser pointer is recommended to avoid the need for the presenter to ...

Page 8 - Introduction; Product Features; WXGA series DLP; Auto source detection with user definable settings

English 8 Introduction Product Features This product is a single chip 0.7” XGA, 0.67 WUXGA and 0.65” WXGA series DLP ® projector. Outstanding features include: u Texas Instruments Single chip DLP ® Technology u Computer Compatibility: Apple Macintosh, iMac, and VESA Standards: UXGA, SXGA+, SXGA, WXG...

Page 9 - Package Overview

English 9 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap IR Remote Control (with 2 x AAA Batteries) Option Lens (Standard lens/ Long throw lens/ Short thro...

Page 10 - Product Overview; Main Unit

English 10 Product Overview Main Unit 2 1 7 6 9 8 11 10 5 4 3 12 13 19 18 17 16 14 15 1. Front IR Receiver 10. Focus 2. Top Cover 11. Lens CAP 3. Lens Release Button 12. Power Button 4. Vertical and Horizontal Lens 13. LED IndicatorsShift Adjustment Controls 14. Input/Output Connections 5. Control P...

Page 11 - Control Panel

English 11 Introduction Control Panel 2 3 1 4 6 5 1. Source / ◄ 2. Keystone + / ▲ 3. Re-Sync / ► 4. Menu5. Enter6. Keystone - / ▼

Page 12 - Rear View; Share with DVI

English 12 Rear View 20 21 1 2 3 5 6 7 8 4 19 17 9 10 11 13 12 14 24 23 25 26 27 28 29 22 1516 18 Introduction 1. Temp LED 16. 12V OUT Connector 2. Lamp LED 17. WIRED REMOTE (3.5mm jack) 3. HDMI Connector 18. AUDIO IN L/R RCA (YPbPr) Connectors 4. VGA 2/ YPbPr Connector 19. AUDIO IN L/R RCA (Video/ ...

Page 13 - Remote Control

English 13 Remote Control 1 2 3 7 8 11 14 24 23 16 17 18 26 27 28 9 1213 15 21 22 19 20 6 25 5 10 4 1. Power On2. Audio3. Function 2 (Assignable)4. Enter5. Four Directional Select Keys6. Display mode7. AV Mute8. V Keystone +/-9. Information Panel 10. S-Video/2 (Number Button for password input) 11. ...

Page 14 - Connecting the Projector; Connect to Computer / Notebook; Installation

English 14 v Due to the difference in applications for each country, some regions may have different accessories. v AUDIO2-IN: Share with DVI & BNC audio input. Connecting the Projector Connect to Computer / Notebook 3 1 9 2 11 10 5 12 4 3D Adapter 6 7 8 1. Power Cord2. VGA Cable3. Audio-in Cabl...

Page 15 - Connect to Video Sources

English 15 Connect to Video Sources 4 DVD Player, Set-top Box, HDTV receiver DVD Player, Set-top Box, HDTV receiver 1 2 3 7 7 9 6 5 4 Video Output 10 8 2 1. Power Cord2. Component Cable *3. HDMI Cable *4. BNC Cable *5. Audio-in Cable *6. Video Cable *7. S-Video Cable *8. VGA Cable 9. SCART to RGB &a...

Page 16 - Caution; • Do not shake or place excessive pressure on the projector or the; Removing the Existing Lens From the Projector; release the top cover; Installing or Removing the Optional Lens

English 16 Caution • Do not shake or place excessive pressure on the projector or the lens components as the projector and lens components contain precision parts. • Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans stop, and turn off the main pow...

Page 17 - Pull out the existing; Installing the New Lens

English 17 5. Pull out the existing lens slowly. Installing the New Lens Remove both end caps from the lens. 1. Align the notches and correctly position the electrical contact pad as shown in the picture. Electrical contact pins 2. Rotate the lens clockwise until you feel it click into place. v Elec...

Page 18 - Powering On/Off the Projector; Powering On the Projector; The Power LED will now flash blue.

English 18 Powering On/Off the Projector Powering On the Projector 1. Remove the lens cover.2. Connect the power cord to the projector.3. Turn On the connected devices.4. Ensure the Power LED turns red and then press the power button to turn On the projector. The Power LED will now flash blue. The s...

Page 20 - Powering Off the Projector; again to confirm, otherwise the message disappears; POWER; Warning Indicator; When the TEMP LED flashes red, it indicates the fan has failed.

English 20 Powering Off the Projector 1. Press POWER to turn off the projector lamp, a message displays on the projector’s screen. 2. Press POWER again to confirm, otherwise the message disappears after 15 seconds. 3. The cooling fans continue to operate for about 180 seconds for cooling cycle and t...

Page 21 - Adjusting the Projected Image; Adjusting the Projector’s Height; Adjusting Projected Image Position; after finished

English 21 Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator foot for adjusting the image height. To raise the image: Use screw in foot u to rise the image to the desired height angle and fine-tune the display angle. To lower the image: Use screw ...

Page 22 - Adjusting the vertical image position; The vertical image height can be adjusted between 50% and -10%

English 22 The Lens Shift function can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. Adjusting the vertical image position The vertical image height can be adjusted between 50% and -10% for XGA, 55% and -15% for WXGA/WUXGA of...

Page 23 - Adjusting the horizontal image position; With the lens in the center position the; Lens Shift Range Diagram

English 23 Adjusting the horizontal image position With the lens in the center position the horizontal image position can be adjusted to the left or right by up to a maximum of 5% of the image width. Please consult the Lens Shift Range diagram below for further clarification. Left Side (W/2) x 10% (...

Page 24 - Adjusting the Zoom / Focus; You may turn the zoom ring to zoom in or out. To focus the image,

English 24 Adjusting the Zoom / Focus You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances. See pages 25-27. Use the keystone buttons to correct image distortion. They can be found on the remote contro...

Page 28 - Using the Control Panel; •Adjust the image Keystone positively.; Source; Confirm your item selection.; Menu; User Controls

English 28 Control Panel Using the Control Panel ▲/Keystone+ (Up arrow) •Adjust the image Keystone positively. • Navigates and changes settings in the OSD. ◄/Source (Left arrow) • Press Source to select an input signal. • Navigates and changes settings in the OSD. Enter Confirm your item selection. ...

Page 29 - Using the Remote Control; Use ▲▼◄► to select items or make

English 29 User Controls Remote Control Using the Remote Control Power Off Refer to the “Powering Off the Projector” on page 20. Power On Refer to the “Powering On the Projector” on page 18. Test Pattern Refer to the “Test Pattern” on page 57. Audio Refer to the “Audio Settings” on page 44. Function...

Page 30 - Press until Power LED is flashing then

English 30 Using the Remote Control Remote ID Press until Power LED is flashing then press 01~99 to set the particular remote code. Remote All Press to set remote code to all. VGA1 Press VGA1 to choose source from VGA- IN connector. S-Video Press S-Video to choose S-Video source. HDMI Press HDMI to ...

Page 31 - On-screen Display Menus; How to operate; on the Remote Control or; Use ▲▼ keys to select the desired item and adjust the settings by; Enter; to confirm, and the screen will return to the main; again. The OSD menu back to last level

English 31 On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press Menu on the Remote Control or Project...

Page 32 - Menu Tree

English 32 Menu Tree IMAGE Display Mode Sharpness Brightness Advanced #Tint #Color IMAGE | Advanced BrilliantColor TM Noise Reduction Gamma Color Temp. Color Space Color Space RGB Gain/Bias Color Matching (saved by signal) Exit *3D SETUP | Security Security Setting Security Timer Change Password Exi...

Page 34 - Image; Display Mode; Brightness; Contrast

English 34 Image Display Mode There are many factory presets optimized for various types of images. 4 Presentation: Good color and brightness from PC input. 4 Bright: Maximum brightness from PC input. 4 Movie: For home theater. 4 sRGB: Standardised accurate color. 4 Blackboard: This mode should be s...

Page 35 - Sharpness; Color; Advanced

English 35 Image Sharpness Adjusts the sharpness of the image. 4 Pres s ◄ to decrease the sharpness. 4 Press ► to increase the sharpness. Color Adjusts a video image from black and white to full color saturation. 4 Press ◄ to decrease the amount of color in the image. 4 Press ► to increase the amoun...

Page 37 - Bias; This setting is used to adjust the balance of red, green and blue in; Gain

English 37 Image | Advanced | RGB Gain/ Bias This setting is used to adjust the balance of red, green and blue in grays/white. Gain Set RGB Gain to adjust the Brightness of the follow in brighter shades: 4 Red—balance the gain value for red. 4 Green—balance the gain value for green. 4 Blue—balance t...

Page 38 - Matching; Magenta can be

English 38 Image | Advanced | Color Matching Colors (Except White) Press ▲▼ to select a color and press Enter to adjust the hue, saturation, and gain settings. Press ▲▼ to select Hue, Saturation, or Gain and press ◄► to adjust the settings. v Green, Blue, Cyan,Yellow, Magenta can be separate adjust ...

Page 39 - White; Reset; White can be

English 39 Image | Advanced | Color Matching White Press ▲▼ to select White and press Enter. Press ▲▼ to select Red, Green, or Blue and press ◄► to adjust the settings. Reset Reset all Color Setting values to the factory default. v White can be adjust Red, Green, Blue color by each. User Controls

Page 40 - Display; Format

English 40 Display Format Use this function to choose your desired aspect ratio. 4 4:3: This format is for 4x3 input sources not enhanced for Wide screen TV. 4 16:9 (XGA) | 16:10 (WXGA/WUXGA): This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV. 4 LBX: This format is...

Page 41 - Digital Zoom; Edge Mask

English 41 Display Digital Zoom 4 Press ◄ to reduce the size of the image. 4 Press ► to magnify an image on the projected screen. Edge Mask Edge Mask function removes the noise in a video image. Edge Mask the image to remove video encoding noise on the edge of video source. H Image Shift Shifts the ...

Page 42 - D Mode; D Format

English 42 Display | 3D 3D Mode 4 DLP Link: Select DLP Link to use optimized settings for DLP Link 3D Glasses. 4 VESA 3D: Select VESA 3D to use optimized settings for IR-based 3D images. 3D  2D Press ◄ or ► to select projector display 3D content in 2D (Left) or 2D(Right) without using 3D glasses to...

Page 43 - Setup; Language; Menu Location

English 43 Setup Language Enter the Language menu. Select the multilingual OSD menu. See page 45 for more information. Projection Select projection method: 4 Front Desktop The factory default setting. 4 Rear Desktop When you select this function, the projector reverses the image so you can project f...

Page 44 - Security

English 44 Setup Security Enter the Security menu. Access the projector’s security features. See page 46 for more information. Signal (RGB) Enter the Signal (RGB) menu. Set projector signal properties. The function is available when input source is support VGA 1/VGA 2/BNC. See page 49 for more infor...

Page 46 - Security Setting; The default

English 46 Setup | Security Security Setting Enable or disable the security password. 4 Enabled—the current password is required to power on the projector and access the Security menu. 4 Disabled—no password is required for any function. When security is enabled, the following screen displays at sta...

Page 47 - Security Timer; is required to

English 47 Setup | Security Security Timer Enter the Security Timer sub menu. Enter the Months, Days, and hours that the projector can be used without entering the password. Exiting to the Setup menu activates the Security Timer. Once activated, the projector requires a password on the specified dat...

Page 48 - Change Password

English 48 Setup | Security Change Password Use this submenu to change the security password for the projector. 1. Select Change Password from the Security submenu. The Confirm Change Password dialog box displays. 2. Select Yes . 3. Enter the default password <1> <2> <3> <4> ...

Page 49 - Automatic; Frequency; Phase

English 49 Setup | Signal (RGB) Automatic Set Automatic to On or Off to lock or unlock the Phase and Frequency features. 4 Off—disable auto lock. 4 On—enable auto lock. Frequency Change the display data frequency to match the frequency of your computer’s graphics card. If you experience a vertical f...

Page 50 - White Level; Black Level; IRE

English 50 Setup | Signal (Video) White Level Allow user to adjust Black Level when input source is Video or S-Video signals. Press ◄► to adjust the White Level. Black Level Allow user to adjust Black Level when input source is Video or S-Video signals. Press ◄► to adjust the Black Level. IRE Press ...

Page 51 - Setup | Audio Settings; Internal Speaker

English 51 Setup | Audio Settings Internal Speaker 4 Off—turn off the internal speaker. 4 On–turn on the internal speaker. Mute Toggle the audio on or off. 4 Off—the speaker volume and audio out are turned on. 4 On–the speaker volume and audio out are turned off. Volume Press ◄ to decrease the volum...

Page 52 - Logo; Closed Captioning; Subsequent

English 52 Setup | Advanced Logo Select the screen to display during startup. 4 Optoma—the supplied default startup screen. 4 Neutral— is Background Color. 4 User—customized screen capture using the Logo Capture function. Logo Capture Capture a displayed screen to use as the startup screen. 1. Displ...

Page 53 - LAN Settings; Control Settings

English 53 Setup | Network LAN Settings Enter the LAN Settings menu. See page 54 for more information. Control Settings Enter the Control Settings menu. See page 55 for more information. User Controls

Page 54 - Network

English 54 Setup | LAN Settings If the connection is successful, the OSD display will show the following dialogue box. 4 Network State—to display network information. 4 DHCP: On: Assign an IP address to the projector from the DHCP server automatically. Off: Assign an IP address manually. 4 IP Addres...

Page 55 - Setup | Control Settings; Crestron; Extron; PJ Link; AMX Device Discovery; Telent

English 55 Setup | Control Settings Crestron Press ◄► to check to enable/disable Crestron. Extron Press ◄► to check to enable/disable Extron. PJ Link Press ◄► to check to enable/disable PJ Link. AMX Device Discovery Press ◄► to check to enable/disable AMX Device Discovery. Telent Press ◄► to check t...

Page 56 - Options; Input Source; High Altitude; Information Hide

English 56 Options Input Source Enter the Input Source submenu. Select the sources to scan for at startup. See page 59 for more information. Source Lock Lock the current source as the only available source, even if the cable is unplugged. 4 On—only the current source is recognized as an input source...

Page 57 - Keypad Lock; Display Mode Lock; Test Pattern

English 57 Options Keypad Lock Lock the buttons on the projector top panel. 4 On—a warning message displays to confirm keypad lock. 4 Off—projector keypad functions as normal. Display Mode Lock Press ◄► to select display mode function whether lock or not. When Display Mode Lock set to On, the Displa...

Page 58 - Lamp Setting; Information; When Power

English 58 Options Advanced Enter the Advanced menu. See pages 61 for more details. Lamp Setting Enter the Lamp Setting menu. See pages 63-64 for more details. Information Show the projector information. Reset Reset all Options to default factory settings. v When Power mode (Standby) is set to Eco, ...

Page 59 - If all sources

English 59 Options | Input Source Input Source Use this option to enable / disable input sources. Press ▲ or ▼ to select a source, then press ◄ or ► to enable / disable it. Press ( Enter ) to finalize the selection. The projector will not search inputs that are de-selected. v If all sources are dese...

Page 60 - Options | Remote Settings; Function 1

English 60 Options | Remote Settings Function 1 Set F1 key as a hotkey for Brightness, Contrast, Color, Color Temp. or Gamma function. Function 2 Set F2 key as a hotkey for Source Lock, Projection, Lamp Settings, Mute, Digital Zoom or Volume function. IR Function Enable or Disable projector’s IR fun...

Page 61 - Direct Power On

English 61 Options | Advanced Direct Power On Enable or disable Direct Power On. 4 On—the projector powers on automatically when AC power is supplied. 4 Off— the projector must be powered on as normal. Signal Power On Enable or disable Signal Power On. 4 On—the projector powers on automatically when...

Page 63 - Options | Lamp Setting; Lamp Hour; Lamp Reminder

English 63 Options | Lamp Setting Lamp Hour Displays the number of hours the lamp has been active. This item is for display only. Lamp Reset After replacing the lamp, reset the lamp counter to accurately reflect the new lamp’s life span. 1. Select Lamp Reset. A confirmation screen displays. 2. Selec...

Page 64 - Brightness Mode

English 64 Options | Lamp Setting Brightness Mode Select the lamp brightness mode. 4 Bright—the default setting. 4 Eco—lower brightness setting to conserve lamp life. Power Press ◄► to select the lamp mode for 370W brightness or 280W brightness to save lamp life. The function is only available when ...

Page 65 - Wired LAN Terminal functionalites; Supported External Devices

English 65 LAN_RJ45 For simplicity and ease of operation, the Optoma projector provides diverse networking and remote management features. The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off, Brightness and Contrast settings. Also, projector status informa...

Page 68 - For more

English 68 7. Press the Menu button on the projector. 8. Select OSD-> SETUP-> Network Settings-> Lan Settings. 9. After getting into Network Status, input the following: 4 DHCP: Off 4 IP Address: 10.10.10.10 4 Subnet Mask: 255.255.255.0 4 Gateway: 0.0.0.0 4 DNS: 0.0.0.0 10. Press ( Enter ) ...

Page 70 - Preparing Email Alerts; Make sure that user can access the homepage of LAN RJ45; Alert Settings; By default, these input boxes in Alert Settings are blank.; SMTP; field is the mail server for sending out email; To; field is the recipient’s email address (for example,; Cc; field sends a carbon copy of the alert to the

English 70 Preparing Email Alerts 1. Make sure that user can access the homepage of LAN RJ45 function by web browser (for ex-ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of LAN/RJ45, click Alert Settings . 3. By default, these input boxes in Alert Settings are blank. 4. For S...

Page 71 - From; field is the sender’s email address (for example,; RS232 by Telnet Function; Fill in all fields; Send Test

English 71 4 The From field is the sender’s email address (for example, the projector administrator). This is a required field. 4 Select the alert conditions by checking the desired boxes. RS232 by Telnet Function Besides projector connected to RS232 interface with “Hyper-Terminal” communication by ...

Page 72 - Quick Start-Guide for “RS232 by TELNET”; Input the command format like the below:

English 72 Quick Start-Guide for “RS232 by TELNET” Check and get the IP-Address on OSD of the projector. Make sure that laptop/PC can access the web-page of the projector. Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out by laptop/PC. 1. Start =>...

Page 73 - How to have TELNET enabled in Windows VISTA / 7; Open “Control Panel” in Windows VISTA.

English 73 How to have TELNET enabled in Windows VISTA / 7 By default installation for Windows VISTA, “TELNET” function is not included. But end-user can have it by way of “Turn Windows features On or Off” to be enabled. 1. Open “Control Panel” in Windows VISTA. 2. Open “Programs”. User Controls

Page 74 - Specsheet for “RS232 by TELNET” :; Windows Telnet utility directly after TELNET connection

English 74 3 Select “Turn Windows features on or off” to open. 4. Have “Telnet Client” option checked, then press “OK” button. Specsheet for “RS232 by TELNET” : 1. Telnet: TCP.2. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team). 3. Telnet utility: Windows “...

Page 75 - Troubleshooting; Image Problems; No image appears on-screen; Partial, scrolling or incorrectly displayed image; Verify the resolution setting is lower than or equal to UXGA; Appendices

English 75 Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image Problems No image appears on-screen 4 Ensure all the cables and power connections are correctly an...

Page 76 - The screen of the Notebook or PowerBook computer; Image has vertical flickering bar; Check and reconfigure the display mode of your graphic card; Image is out of focus; Make sure the projection screen is between the required

English 76 4 If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings. Example: [Fn]+[F4] Acer [Fn]+[F5] Asus [Fn]+[F8] Dell [Fn]+[F8] Gateway [Fn]+[F4] Mac Apple: System Preference Display Arrangement Mirror display IBM/...

Page 77 - Intermission Problems

English 77 The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16:9 format in OSD. If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. If the image is still stretched, you will also ...

Page 78 - What is the difference between a “Standard” HDMI; All HDMI products are required to be certified by the

English 78 HDMI Q & A What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High-Speed cables. 4 Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mh...

Page 79 - Projector Status Indication

English 79 Projector Status Indication Message Power LED Power LED Temp LED Lamp LED (Blue) (Red) (Red) (Red) Operating On 0 0 0 Warm up or Cooling down Flashing (0.5 sec) 0 0 0 Standby 0 On 0 0 T1 temperature over temperature 0 Flashing On 0 Thermal break 0 4 0 0 Lamp error 0 Flashing 0 On Fan erro...

Page 80 - Message Reminders; Remote Control Problems; There is no sound

English 80 Message Reminders 4 Replacing the lamp: 4 Out of range: (see the following for more information) Remote Control Problems If the remote control does not work 4 Check the operating angle for the remote control is approximately ±15°. 4 Make sure there are no obstructions between the remote c...

Page 81 - Replacing the Lamp; only be replaced with a certified replacement part, which you can

English 81 Replacing the Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer.Important: 4 The lamp contains a certain amount of mercury and should be disposed of according to local ord...

Page 83 - Cleaning the Projector; Cleaning the Lens

English 83 Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation.Warning: 4 Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn. 4 Use only a dampened cloth when cleanin...

Page 84 - Compatibility Modes; Video Compatibility; Signal

English 84 Compatibility Modes Video Compatibility NTSC NTSC M/J, 3.58MHz, 4.43MHz PAL PAL B/D/G/H/I/M/N, 4.43MHz SECAM SECAM B/D/G/K/K1/L, 4.25/4.4 MHz SDTV 480i/p, 576i/p HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080P(50/60Hz) Video timing detail describe Signal Resolution Refresh Rate(Hz) Notes TV(NTS...

Page 85 - Computer Compatibility - VESA standards; Computer Signal (Analog RGB Compatible

English 85 Computer Compatibility - VESA standards Computer Signal (Analog RGB Compatible Signal Resolution Refresh Rate(Hz) Notes for Mac VGA 640 x 480 60/67/72/85 Mac 60/72/85 SVGA 800 x 600 56/60 (*2) /72/ 85/120 (*2) Mac 60/72/85 XGA 1024 x 768 50/60 (*2) /70/ 75/85/120 (*2) Mac 60/70/75/85 HDTV...

Page 87 - True 3D Video Compatibility table; Input

English 87 True 3D Video Compatibility table Input Resolutions Input timing HDMI 1.4a 3D Input 1280 x 720p @50Hz Top - and - Bottom 1280 x 720p @60Hz Top - and - Bottom 1280 x 720p @50Hz Frame packing 1280 x 720p @60Hz Frame packing 1920 x 1080i @50Hz Side- by-Side (Half) 1920 x 1080i @60Hz Side- by...

Page 88 - Pin No

English 88 RS232 Commands RS232 Connector 6 7 8 9 1 2 3 4 5 Pin No Specification 1 N/A 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 N/A Appendices

Page 89 - RS232 Protocol Function List

English 89 RS232 Protocol Function List RS232 Commands Baud Rate : 9600 Note : There is a <CR> after all ASCII commands Data Bits: 8 0D is the HEX code for <CR> in ASCII code Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return...

Page 93 - Telnet Commands; Defined by; AMX Device Discovery commands

English 93 Telnet Commands 4 Port: support 3 ports of 23/1023/2023 4 Multi-connections: Projector could receive commands from different ports at the same time 4 Command Format: Follow RS232 command format (support both of ASCII and HEX) 4 Command Response: Follow RS232 return message. Lead Code Proj...

Page 94 - command protocol is modified.; PJLinkTM supported commands; Command

English 94 Command Description Remark (Parameter) Config-URL Device’s IP addressLAN IP address is shown up if LAN IP address is valid.Wireless LAN IP address is shown up if Wireless LAN IP address is valid. http://xxx.xxx.xxx. xxx/index.html Revision The revision must follow a major.minor.micro sche...

Page 95 - specifications

English 95 Command Description Remark (Parameter) INPT? Inquiry about input switching 12 = VGA213 = Component14 = BNC21 = VIDEO22 = S-VIDEO31 = HDMI 132 = HDMI 2 AVMT Mute control 30 = Video and audio mute disable AVMT? Inquiry about the mute state 31 = Video and audio mute enable ERST? Inquiry abou...

Page 96 - Trademarks; HDMI, the HDMI Logo and High-Definition Multimedia Interface

English 96 Command Description Remark (Parameter) INF0? Inquiry about other information No other information is available. No parameter is returned. CLSS? Inquiry about the class information “1” is returned. Trademarks 4 DLP is trademarks of Texas Instruments. 4 IBM is a trademark or registered trad...

Page 97 - Ceiling Installation; screws that meet the following specifications:

English 97 Ceiling Installation To prevent damage to your projector please use the recommended mounting package for installation.To ensure compliance, only use a UL Listed ceiling mount and screws that meet the following specifications: 4 Screw Type: M4 4 Maximum screw length: 11 mm 4 Minimum screw ...

Page 98 - For service or support please contact your local office.; Service

English 98 Optoma Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA Tel : 888-289-6786 Fax : 510-897-8601 www.optomausa.com Service : [email protected] Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada Tel...

Page 100 - Regulation & Safety notices; FCC notice; generates, uses, and can radiate radio frequency energy and, if not; Notice: Shielded cables; $OO FRQQHFWLRQV WR RWKHU FRPSXWLQJ GHYLFHV PXVW EH; PDQXIDFWXUHU FRXOG YRLG WKH XVHUಬV DXWKRULW\ ZKLFK LV

English 100 Regulation & Safety notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protect...

Page 101 - Operation conditions; This device complies with Part 15 of the FCC Rules. Operation is; Notice: Canadian users; This Class B digital apparatus complies with Canadian ICES-003.; Remarque à l’intention des utilisateurs canadiens; Cet appareil numerique de la classe B est conforme a la norme; Declaration of Conformity for EU countries; Disposal instructions; Do not throw this electronic device into the

English 101 Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operat...