Page 2 - Important Safety Instructions
WARNING: TO REDUCE THE RISK OE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC1.NG TO QUALIFIED SERVICE PERSONNEL. A A I WARNING 11 AVIS I RISK OF ELECTRIC SH...
Page 3 - Precautions; WARNING
Precautions 1. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder. 2. AC Fuse The fuse is located inside the chassis and is not user~serviceable. IF power does not come on, contact your Onkyo authorized service stat...
Page 4 - Contents; Before using
Contents Before using Important Safety Instructions .......................... 2 Precautions ................................................. 3 Contents.............................................................. 4 Features ...... ................................................ 6 Supplied access...
Page 5 - Appendix; Declaration of Conformity
Contents Preference ...... ...................................................56 Preference............................................................................. 56 Audio Adjust.......................................................57 Enjoying music in the remote zone................. 60 Usin...
Page 6 - Features; Amplifier Features; Sc; Other Performance Features
Features TX-SR701/701E Amplifier Features ■ IM W X 2 (Front)/100 W (Center)/100 W x 2 (Surround)/ IM W (Surround Back) at 8 ohms, 20 Hz - 20 kHz, 0.08 % THD (FTC rated) ■ 130 W X 2 (Front)/130 W (Center)/130 W x 2 (Surround)/ 130 W (Surround Back) at 6 ohms, 1 kHz (DIN) ■ 160 W X 2 (Front)/160 W (Ce...
Page 7 - Supplied acœssories; Before using this unit; Setting the voltage selector
Supplied acœssories Check thaï the following accessories are supplied with the TX-SR701/701E/ 601/601E. AM loop antenna x 1 FM Indoor antenna x 1 Remote controller x 1 TX-SR701/701E: RC-533M TX-SR601/601E: RC-515M Batteries (AA, R6) x 2 Speaker cable label x 1 The following accessories may be availa...
Page 8 - Front panel facilities; Front panel
Front panel facilities Here is an explanation of the controls and displays on the front panel of the TX-SR70I/70IE/60I/601E. Front panel <TX-SR701E> <TX-SR601E> 8
Page 9 - POWER switch (for all models other than USA and
Front panel facilities For furiher operational instructions, see the pages indicated in brackets | I. POWER switch (for all models other than USA and Canadian models, and Australian models) [28] Press to turn on and off the main power supply for the TX-SR701/ 701E/601/60IE. When the TX-SR701/701E/60...
Page 10 - Ftx>nt panel facilities; DIRECT/PURE AUDIO button and indicator
Ftx>nt panel facilities Input source buttons (DVD, VIDEO 1-4, TAPE, TUNER, CD, and PHONO (TX-SR701/701E only)) [41] These buttons are used to select the input source. Press these buttons to select the input source for the main zone. To select the input source for the remote zone (Zone 2) or recor...
Page 11 - TUNED indicator
Front panel facilities Front panel display © © ® MUTING indicator Flashes when the mute function is turned on. ® Listening mode or digital input format indicators One of these indicators lights to show the format of the current input source. In addition, one of the listening mode indicators lights t...
Page 12 - Remote controller; CH
Remote controller RC-533M RC-515M © SEND/LEARN indicator Lights I'ed when signals are sent by the remote controller. It also flashes when a button is pressed when the battery power is low. ON/STANDBY button [28] ON: Press to turn on the TX-SR701/701E/601/601E. STANDBY; Press to place the TX-SR701/70...
Page 14 - Connections
Connections Be sure to always refer to the instructions that came with the component that you are connecting. Do not plug in the power cord until all connections have been properly made. For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used f...
Page 16 - Connecting your audio components; CD input source is set for digital input at the COAXIAL jack
Connections Here is an explanation of typical ways to connect various components to the TX-SR70J/701E/601/601E. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should o...
Page 17 - Connecting a DVD Player with 5.1-Channel Output; Connecting your video components; COMPONENT VIDEO INPUT/OUTPUT
Connections Connecting a DVD Player with 5.1-Channel Output P b \ / ^ I'iTTTim— P h Component video output Video output S video output 4 b DVD player (DVD) ) Analog audio output (center) /Analog audio output (subwoofer) Analog audio output (surround UR)______ L (whits) Analog audio output (front L/R...
Page 18 - DVD input source is set for the COMPONENT VIDEO INPUT
Connections Connecting a DVD Player with 2-Channel (L/R) Audio Output : Signal flow 4. Connecting a DVD player (DVD) Using an RCA video cable, connect the video output jack (composite) of the DVD player to Che DVD V IN jack of the TX- SR701/701E/601/601E. Or if the DVD player has an S video output J...
Page 19 - VIDEO 1 input source is set for the COMPONENT VIDEO
Connections у Component video output ^ ПШШ— P r ^... . video output S Video output 5. VCR (VIDEO 1) ^.... jiTWni— Video input S Video input L (white) Analog audio output R (red) L (white) R (red) Analog audio input 5. Connecting a video cassette recorder (VIDEO 1) Using RCA video cables, connect the...
Page 20 - , Connecting a DVD recorder or other digital video recording
Connections 8. TV monitor or projector (MONITOR OUT) Component video input Video input S Video input : Signal flow 7, Connecting a DVD recorder or other digital video recording device (VIDEO 2) Using RCA video cables, connect the video output jack (composite) of the device to the VIDEO 2 V IN jack o...
Page 21 - The VIDEO 4 digital input is fixed to the OPTICAL input on; 2V TRIGGER ZONE 2 terminal
Connections 9. Connecting video camera, etc. (VIDEO 4 INPUT) Using an RCA video cable, connect Che video output jack (composite) of the device to the VIDEO 4 VIDEO jack of the TX- SR701/701E/601/60ÍE. Or if the device has an S video output Jack, connect it to the VIDEO 4 S VIDEO jack of Che TX-SR70Ì...
Page 22 - Operating components not reached by the remote; In order to use the remote controller to control the TX-SR701/; If the remote controller signal does not reach the
Operating components not reached by the remote controller signals (IR IN) In order to use the remote controller to control the TX-SR701/ 701E/601/601E from a remote location, you will need to prepare a multi-room kit (sold separately) such as one of those given below: • Onkyo’s Multi-Room System kit...
Page 23 - Connecting the remote zone (Zone 2) speakers; When using the ZONE 2 SPEAKERS terminals; Connect the remote zone speaker cables to the; When using the ZONE 2 PRE OUT terminals
Connecting the remote zone (Zone 2) speakers The TX-SR701/701E/601/601E allows you to listen to two separate input sources at the same time. This allows you to, for example, place speakers in two different rooms so that two or more people can enjoy two different kinds of music at the same time. The ...
Page 24 - AC OUTLETS; The shape, number, and total capacity of the AC outlets may; Rl REMOTE CONTROL; Power on/ready function
Connections AC OUTLETS The TX-SR701/701E/601/601E is equipped with AC mains outlets for connecting the power cords from other devices so that their power is supplied through the TX-SR701/701E/601/601E. By doing this, you can leave the connected device turned on and have the STANDBY/ON button on the ...
Page 25 - Connecting speakers; Standard speaker setup for surround sound; Important points regarding speaker placement
Connecting speakers Before connecting the speakers, it is vei'y important to place them properly for the optimum sound space for your listening pleasure. Be sure to refer to the instruction manuals that came with the speakers during placement and connection. Furthermore, be aware that for surround p...
Page 26 - Using the speaker cable labels; The speaker dianuels are colored as follows:; Connecting a subwoofer
Connecting speakers Using the speaker cable labels The positive speaker terminals on the TX-SR701/701E/601/601E are color coded for easy identilication. Attach the supplied speaker labels to the speaker cables, and then match the colors on the speaker cables to the corresponding terminals. The speak...
Page 27 - • Connect only speakers with an impedance between 6 and 16; Connecting the speaker cable; of the wire insulation.; ri
Connecting speakers Connecting speakers After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your TX-SR701/ 701E/601/601E. Caution: • Be sure to connect the positive (+) and negative (-) cables for the speakei's properly. If they are mixed up,...
Page 28 - Connecting the power; (AH models other than USA and Canadian models and; Turning on the power; , Plug the power cord into an AC wall outlet.; Turning on the power from the remote controller; Press the ON button to turn on the
Connecting the power Diagram forTX-SR701/701E Diagram for RC-533M • Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit, such as computers. If this happens, use a wall outlet on a different circuit. (AH models other than U...
Page 29 - Connecting antennas; better I'eception cannot; Assembling the AM loop antenna; Press down the lever at the antenna terminal.; Connecting the included antennas; Connecting the FM indoor antenna:
Connecting antennas To use the tuner of the TX-SR701/701E/601/601E, it is necessary to prepare the supplied FM and AM antennas. • Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast. • If better I'eception cannot be obtained, th...
Page 30 - Connecting an FM outdoor antenna; Connecting an AM outdoor antenna; Directional linkage; Connecting the antenna cable to the 75/300 O
Connecting antennas Connecting an FM outdoor antenna Make sure lo follow the general rules given below: • Keep the antenna away from noise sources (neon signs, busy roads, etc.). • It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc. Connect...
Page 31 - Configuring the speakers; RETURN; Displaying the Main Menu; Speaker Configuration; Use the A and ▼ cursor buttons to select ‘‘1. Speaker; Ves; S u b
Configuring the speakers A/TH/^ SETUP RETURN RETURN SETUP -A/VH/^ ENTER To create the optimum sound space for both visual and audio pleasure, it is necessary to set the size of the speakers and their distance from your normal listening position. Once made, you will not need to change these settings ...
Page 32 - Adjustable Crossover for Bass Management
Configuring the speakers Use the A and ▼ cursor buttons to select “Subwoofer” and then use the < and >■ cursor buttons to select the subwoofer setting. Yes: Select when a subwoofer is connected. No: Select when a subwoofer is not connected. TX-SR701/701E/601/601E Remote controller 5. Use the A...
Page 33 - Setting the speaker distance from your normal; un I T
Configuring the speakers Setting the speaker distance from your normal listening position Each speaker can be set between 1 and 30 feet (0.3 and 9 meters) in 1 "foot (0.3 meter) increments. Select the setting closest to the actual distance from the speaker to your normal listening position. Note...
Page 34 - Calibrating the speaker levels
Configuring the speakers TX-SR601/601E 1. Use the A and ▼ cursor buttons to select “3. Speaker Distance” on the main menu and then press the ENTER button. The “Speaker Distance” menu appears. -J| HlENTER I] t. * Menu ************** 1.Hardware Config 2.Speaker Config I 3.Speaker Distance 4.Level Cali...
Page 35 - C a l
Configuring the speakers 2. Use the A and ▼ cursor buttons to select “Left.” (1) Remember Che volume level of this noise and then press the ▼ cursor button. (Note that this can be adjusted to any level between -12 and +12 decibels in 1 -decibel increments. For subwoofer, values between -15 and -t-12...
Page 36 - Using the remote controller; Buttons used for navigating through the menus; Press the TEST button to complete
Configuring the speakers Using the remote controller 1. Press the TEST button. You will hear a pink noise which will be emiited from the S'ronl left speaker. (1) Remember the volume level of this noise and then press the CH SEL button. The TX-SR601/601E will now emit the pink noise from the center s...
Page 37 - Listening to Radio Broadcasts; Tuning into a radio station; Listening to a stereo radio station (FM mode); press the
Listening to Radio Broadcasts One of the feaiures of the TX-SR701/701E/601/601E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-SR701/701E/601/601E provides a number of listening modes perfect for listening to the radio and getting the most out of your ...
Page 38 - Presetting a radio station; Selecting a preset radio station; Erasing a preset radio station
Listening to Radio Broadcasts FM MODE TUNER RCVRMODE -TUN Presetting a radio station 1, Tune into the radio station you desire (see “Tuning into a radio station”). r I I f..j *..J a Jl. I II I 2. Press the MEMORY button on the front panel. The MEMORY indicator lights red. Selecting a preset radio st...
Page 39 - Listening to RDS broadcasts
Listening to RDS broadcasts (European models only) Listening to RDS broadcasts RDS reception is available only on Che European model and only in areas where RDS broadcasts ai'e available. PTY program types in Europe The text given below in parenthesis is what is actually displayed on theTX-SR701E/60...
Page 40 - Listening to RDS broadcasts (European modeis oniy); Performing a PTY scan; Performing a TP scan
Listening to RDS broadcasts (European modeis oniy) PRESET ◄/► Displaying Radio Text (RT) If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display of the TX- SR701E/601E. If the station does not, this function will be ignored. 1. To display t...
Page 41 - Selecting an Audio Component; Basic operation; Start playing the selected input source.; Adjust the volume to an appropriate level.
Selecting an Audio Component TX-SR701/701E RCVRMODE Input source buttons * jV- V.SML.T' llJJi / \I'EfJ) I® ^1 sBi [Cfc jai VOL№ INPUT SELECTOR buttons Basic operation if you want to perform these operations using the remote controller, first press the RCVR MODE button. 1. Press the desired input sou...
Page 42 - RCVR MODE; Selecting the type of audio input signal; Selecting the setting mode with the Cursor-4 button
Selecting an Audio Component RCVR MODE CH SEL AUDIO SEL LEVELA/T TAP Selecting the type of audio input signal Press the AUDIO SELECTOR button on the front panel (or AUDIO SEL button on the remote controller) to change the audio mode. Each time the button is pressed, the mode changes from “Auto” —>...
Page 43 - Temporarily changing the speaker output levels; Using the remote controller; To change the display of the input source from; Changing the display:
Selecting an Audio Component Temporarily changing the speaker output levels To change the individual speaker volumes temporarily, follow the procedure given below. Each channel can be set between -12 and +12 decibels. For subwoofer, values between -15 and +12 decibels can be set. Note that the calib...
Page 44 - Eb; Using the sleep time (remote controller only); Enjoying DVD multichannel audio playback; Listening with headphones
Selecting an Audio Component AUDIO ADJUST SLEEP AUDIO SEL PHONES AUDIO SELECTOR :s.s, ' "*5, ' T - Eb r^Vn / 1 ^ ■Ж” E3 & < ж & VOL№ AUDIO ADJUST Using the sleep time (remote controller only) The SLEEP button enables you to set the TX-SR701/701E/601/ 601E to turn off automatically aft...
Page 45 - Switching the display; i t; Temporarily turning off the sound
Selecting an Audio Component Using the tone control; To make bass and treble adjustment work for multichannel sources, you must lirst set the tone control to “On.” To turn on the tone control: 1. Press the SURROUND button (or SURR button on the remote controller). TX-SR701/701E/601/601E Remote contr...
Page 46 - Listening Modes
Listening Modes The TX-SR701/701E/60i/601E’s surround sound enables you to enjoy the presence of a movie theater or concert hall in your I'ooni. The configuration of the speakers is very important for the surround sound. Refer to “Connecting speakers” on page 25. Before using a listening mode, make ...
Page 48 - When using the remote controller, first press the RCVR; If the SURROUND button is pressed
Listening Modes TX-SR701/701E Listening mode buttons n .... 1 lo-Ci-f 1 1 l=lt=B 1 D 1 ...... \ _ . @ La-.. 9 -® (1) "czr "czr RCVRMODE Listening mode buttons Re-EQ Selecting a listening mode (TX-SR701/701E) • Refer to pages 46, 47 for more details of listening modes. • Refer to page 54 for ...
Page 49 - If the THX listening mode is seiected
Listening Modes THX: Changes the listening mode to the THX listening mode. If the THX listening mode is seiected • While playing back Dolby Digital sources Switches the THX Surround EX mode (Auto ^ On —> Off) if the source is a THX Surround EX-compatible source. • While playing back Analog/PCM so...
Page 50 - CINE FLTR
Listening Modes TX-SR601/601E Listening mode buttons RCVRMODE Listening mode buttons CINE FLTR Selecting a listening mode (TX-SR601/601E) • Refer to pages 46, 47 for more details of listening modes. • Refer to page 54 for sources and listening modes. • When playing Dolby Digital or DTS software, the...
Page 51 - Original filter (CinemaFILTER) loading for movies
Listening Modes DSP: Changes the listening mode for the signal type that is currently being input from the selected input source as shown below. Orchestra -4 Unplugged ^ Studio-Mix -> TV Logic ^ All Ch Stereo ^ Mono ^ T-D Mono Movie ^ Enhance Orchestra. If pressed, the corresponding settings in t...
Page 52 - Input Setup; Zcih s L a s t l ' s l i d
Input Setup RETURN SETUP -A/TH/^ ENTER This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the TX-SR701/701E/601/601E. The settings made in this menu are valid for the input source that is currently selected with the input s...
Page 55 - Hardware Sebjp; Hardware Config; To display the Hardware Config menu:
Hardware Sebjp Hardware Config To display the Hardware Config menu: 1. Display the main menu. 2. Use the A and ▼ cursor buttons to seiect “1. Hardware Config" and then press the ENTER button. The “Hardware Config” menu appears. TX-SR701/701E TX-SR601/601E d. TV Format (TX-SR701/7(HE) c. TV Forma...
Page 56 - Preference; To display the Preference menu:
Preference Preference To display the Preference menu: 1. Display the main menu. 2. Use the A and ▼ cursor buttons to select “6. Preference” and then press the ENTER button. The “Preference” menu appears. TX-SR701/701ETX-SR601/601E t i f L . e y e i U . a. Headphone Level You can adjust the volume ou...
Page 57 - Audio Adjust; Double Bass
Audio Adjust AUDIO ADJUST à . i y K I > AUDIO ADJUST These settings are enabled depending on the listening mode or input signal. Setup Procedure 1. Press the AUDIO ADJUST button. The Audio Adjust settings appear in the front display and on the monitor. 4Bass Treble OdBOdB Note: The items that app...
Page 58 - Center Image; Center
Audio Adjust Center Image DTS Neo:6 derives a center channel from two-channel PCM and analog sources.In cinema mode, for Lt/Rt film soundtracks, sounds steered to the center are subtracted from the left and right channels. In music mode, the intent in the front channels is less one of steering and m...
Page 59 - Front Expander
Audio Adjust Front Expander In the Theater-Dimensional mode, the front expander function spreads out the stereo image in front of the listener. The created stereo image is as if the front speakers have been farther apart for the feeling of a wide sound space. This is especially useful for narrow lis...
Page 60 - Enjoying music in the remote zone; Select an input source:; Adjusting the volume for the remote zone
Enjoying music in the remote zone 1, Press the ZONE 2 button. 2. Select an input source. After pressing the ZONE 2 button, you must press an input source button within 5 seconds. The ZONE 2 indicator lights. Ex.: When the CD button is pressed. To select the same source foi' the remote zone that is s...
Page 61 - Recording; Recording the input source (REC OUT selector)
Recording RECOUT OFF Input source buttons Notes: • You cannot record the surround effects. • Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGIIAL INPUT (OPTICAL) inputs will be output to the DIGllAL OUTPUT (COAXIAL) and DIGITAL OUTPUT (OPTICAL) output. • There ai'e some restrictions on r...
Page 62 - Recording both the audio and video; , Press the input source button for the source you want
Recording Recording both the audio and video The TX-SR701/701E/601/601E also allows you to record the audio and video signals output from the VIDEO OUT 1 and 2 Jacks. 1, Press the input source button for the source you want to record. i§M§) ;§Mi) 2. Start recording at the recording device connected ...
Page 63 - Using remote controller; Overview; Calling up a preset radio station; VOL; Controlling an Onkyo cassette tape deck
Using remote controller * Diagram for RC-533M RCVR MODE I &► s |« l ] 1»I 'Ш iM (S d I □ /I® —VOL й/w — MUTING -TUN Overview The RC-533M/515M remote controller is a useful tool that can not only operate the TX-SR701/701E/60i/601E, but also all the other components of your home theater as well. T...
Page 64 - Controlling an Onkyo DVD player; VOU
Using remote controller Controlling an Onkyo DVD player The RI connector of the Onkyo DVD player must be connected to the TX-SR701/701E/601/601E (see page 24). 1. Press the DVD MODE button. The DVD MODE button lights. 2. Press the desired operation button. The buttons shaded in the figure to the lef...
Page 65 - Controlling an Onkyo CD player; STANDBY
Using remote controller Controlling an Onkyo CD player The HI connector of Che Onkyo compact disc player must be connected to the TX-SR701/70iE/601/601E (see page 24). 1. Press the CD MODE button. The CD MODE button lights. 2. Press the desired operation button. The buttons shaded in the figure to t...
Page 66 - Controlling an Onkyo MD recorder
Using remote controller Controlling an Onkyo MD recorder STANDBY SAT/MD MODE VOL m MUTING MDoperationbuttons Numeric keys ENTER The RI connector of the Onkyo MD recorder must be connected to the TX-SR701/701E/60i/601E (see page 24). 1. Press the SAT/MD MODE button. The SAT/MD MODE button lights. 2. ...
Page 67 - Entering a pre-programming code; Caution; Learning a pre-programming code
Entering a pre-programming code The remote controller has three learning functions. One is entering the pre-programmed code for a remote controller of another manufacturer. Another is the normal learning function that enables the remote controller to learn the codes directly from other remote contro...
Page 69 - Operating your programmed remote controller; After entering a pre-programming by foilowing the procedure
Operating your programmed remote controller After entering a pre-programming by foilowing the procedure given above, the following modes become enabled for use. DVD MODE (DVD Player Mode) Operations are Che same as explained on page 64. STANDBY CABLE MODE VOL m MUTING - Numeric keys ENTER SAT MODE (...
Page 71 - Programming procedure
Programming the commands of remote controllers for other devices into the remote controller SEND/LEARN indicator MODE buttons ENTER Programming procedure When programming the commands of another remote controller to the RC-333M/515M remote controller, you must first decide under which MODE button yo...
Page 72 - controller; Erasing the programmed command from one
Programming the commands of remote controllers for other devices into the remote controller 4. Press and hold down the button (that corresponds to the command you are programming) on the remote controller of the other device until the SEND/LEARN lamp on the remote controller flashes twice. After fla...
Page 73 - Using the macro function; What is the macro function?; only pressing one button.; Programming the macro; Executing the macro
Using the macro function What is the macro function? A macro function enables you to program a series of button operations (up to 16) on the remote controller into a single button. The series of operations are then called a macro. For example, to play a compact disc player connected to the TX-SR701/...
Page 74 - Erasing a macro from the MACRO 1 (or 2) button; Erasing ail commands and macros that have
Using the macro function Erasing a macro from the MACRO 1 (or 2) button SEND/LEARN indicator MACRO 2 MODE buttons ENTER 1. Press and hold down any one of the seven MODE buttons, press the MACRO 1 (or 2) button, and then release both buttons. When you press the MODE button, it lights and the SEND/ LE...
Page 75 - Troubleshooting guide; POWER
Troubleshooting guide if a problem occurs while you are using the remote controller, first try to operate the controls on the front panel of the TX-SR701/ 701E/601/601E to make sure that it is not due to a malfunction (or worn out batteries) in the remote controller. POWER No power. • Power cord is ...
Page 76 - REMOTE CONTROLLER
Troubleshooting guide Stereo indicator lights, but sound is distorted and stereo separation is bad. • Station is too strong. —* Change to FM indoor antenna (see page 29). • Multiple reflection of the radio waves because of tall buildings or mountains.—> Use antenna that has better directivity and...
Page 77 - If one of the messages shown below appears
Troubleshooting guide If one of the messages shown below appears “Not available with headphones use” Operation not allowed because headphones are plugged into the TX-SR701/701E/601/601E. “Not available with Multichannel use” Operation not allowed while the multi-channel output is being used. “Not av...
Page 78 - Specifications; ctx
Specifications ctx - srtoi / toie ) AMPLIFIER SECTION Continuous average power output Ail channels; Continuous power output (DIN) Maximum power output (EIAJ) Dynamic power output (stereo) Total harmonic distortion: IM distortion: Damping factor:Input sensitivity and impedance PHONO:LINE (CD, TAPE, D...
Page 80 - ONKYO CORPORATION
ONKYO CORPORATION Sales & Product Planning Div. : 2-1, Nisshin-oho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax; 072-831 -8124 ONKYO U.S.A. CORPORATION 18 Park Way. Upper Saddle River, N.J. 07458. U.S.A. Tel; 201-785-2600 Fax; 201-785-2650 hiip;//www.onkyousa.com ONKYO EUROPE ELECT...
Onkyo SKB-770
User Manual
Onkyo HT-R758
User Manual
Onkyo SKF-690
User Manual
Onkyo TX-SR313
User Manual
Onkyo SKW-204
User Manual
Onkyo HT-R591
User Manual
Onkyo HTX-22HDX
User Manual