Onkyo TX-NR1000 - Manuals

5 Table of Contents —Continued About Network Configuration ........................ 73Using the Remote Controller ......................... 74Enjoying Internet Radio ................................. 76Playing a Music File Saved on the Net-Tune Server ...................................................

6 Features Amplifier Features • 192 kHz/24-Bit DAC for All Channels • Color-Coded Heavy Duty Dual Banana Plug Compatible Transparent Speaker Posts • Color-Coded 7.1 Multi-Channel Inputs and Pre Outs • Powered Zone 2 and Zone 3• 5 12V DC Trigger Outputs and 3 IR Inputs/ Outputs • Massive, Shielded To...

7 Features —Continued • Audiophile Grade Parts• IntelliVolume• Pure Audio Mode• Digital Upsampling• Absolute Ground Plate• Large, Fluorescent, 35 Dot Matrix Display With 4 Mode Dimmer • For Ultimate Control—The Last Remote You’ll Ever Need • A-Form Listening Mode Memory In catalogs and on packaging,...

8 Supplied Accessories Make sure you have the following accessories: Plug the supplied power cord into this AC INLET.• Do not use a power cord other than the one supplied with the TX-NR1000/TX-NR5000E. The power cord supplied is designed for use with the TX-NR1000/TX-NR5000E and should not be used w...

9 Before Using the TX-NR1000/TX-NR5000E Notes: • The supplied batteries should last for about six months, although this will vary with usage. • If the remote controller doesn’t work reliably, try replacing the batteries. • Don’t mix new and old batteries, or different types of batteries. • If you in...

10 Index Parts and Facilities Here is an explanation of the controls and displays on the front panel of the TX-NR1000/TX-NR5000E.The specifications for your model may differ due to regional requirements. Front Panels STANDBY/ON STANDBY PURE AUDIO MASTER VOLUME OPEN ZONE 2 ( ) GREEN MAIN ( ) BLUE REC...

11 Index Parts and Facilities —Continued For further operational instructions, see the pages indicated in brackets [ ]. 1 POWER switch (for all models other than USA, Canadian, and Australian models) [50] Press to turn on and off the main power supply for the TX-NR1000/TX-NR5000E. When the TX-NR1000...

12 Index Parts and Facilities —Continued Inner Panels TUNING MODE MEMORY SETUP EXIT PHONES VIDEO 7 INPUT S VIDEO DIGITAL AUDIO VIDEO L R LISTENING MODE AUDIO SELECTOR TONE CLEAR DIMMER ZONE 2 REC/ ZONE 3 LEVEL LEVEL SELECT/ PRESET CONTROL / TUNING PUSH TO ENTER PUSH TO ENTER TUNING MODE MEMORY SETUP...

13 Index Parts and Facilities —Continued A LISTENING MODE button [59] Press this button to enter the setup mode for the listening mode. Turning the [SELECT/PRESET] allows you to select the listening mode. To confirm your selection and exit the setup mode, press the [SELECT/PRESET]. B AUDIO SELECTOR ...

14 Index Parts and Facilities —Continued 1 ( ) i.LINK S400 (AUDIO) terminals Some of the Asian models are not equipped with the i.LINK(AUDIO) terminals.These connectors are for connecting to the i.LINK (AUDIO)-ready device using a 4-pin (S400) i.LINK (AUDIO) cable. The TX-NR1000/TX-NR5000E complies ...

15 Index Parts and Facilities —Continued B RS 232 This port is for connecting the TX-NR1000/TX-NR5000E to home automation and external controllers. C PRE OUT A/B To use the TX-NR1000/TX-NR5000E as a preamplifier, connect a power amplifier to this jack. D SPEAKERS A/B These terminals are for connecti...

16 Index Parts and Facilities —Continued The TX-NR1000/TX-NR5000E’s remote controller is a multipurpose device that can be used to control not just the TX-NR1000/TX-NR5000E but your other AV components as well. This section explains how its various operating modes can be used to control the TX-NR100...

17 Index Parts and Facilities —Continued E DIRECT button This button is used to select the Direct listening mode. F PURE A button This button is used to select the Pure Audio listen-ing mode. G TEST TONE, CH SEL, LEVEL– & LEVEL+ buttons These buttons are used to adjust the level of each speaker ...

18 Speaker Placement The TX-NR1000/TX-NR5000E has many excellent features to recreate a clear three-dimensional sound image and lively sound movement. This enables you to enjoy, at home, the rich sound effects of a live theater or concert hall performance.When playing a DVD, you can enjoy sound effe...

19 Speaker Placement —Continued To fully enjoy surround sound, the configuration and placement of the speakers used are important. Be sure to read through the descriptions in the previous page and shown below.This section provides the examples and descriptions that assume a typical situation. Front ...

20 Speaker Placement —Continued Subwoofer Using a subwoofer greatly improves the volume level and sound quality of bass sounds. The subwoofer effect depends not only on the listening position but also on the shape of the listening room.• In general, place the subwoofer in a corner of the room or at ...

21 Speaker Placement —Continued The following speaker placements will be available according to the number of speakers connected to the TX-NR1000/TX-NR5000E. For the number of speaker channel, _.1 ch represents a subwoofer. Key to abbreviations:FL : Front left speaker, FR : Front right speaker, C : ...

22 Speaker Placement —Continued The TX-NR1000/TX-NR5000E has two speaker terminal blocks for speaker system [A] and [B]. This allows you to build two 7.1 ch home theater systems, and various speaker placements and connections are also available. For example, some channels of either speaker system ca...

23 Speaker Placement —Continued Main room A: 7.1 ch speaker systems and the two additional front speakers (When you want to use speaker system [A] for movies and enjoy 7.1 surround sound and the two additional front speakers for classic music.) • Set all the zone parameters for speaker system [A] to...

24 Speaker Placement —Continued Main room A: 5.1 ch speaker system including the front speakers connected through the BTL or bi- amp connections • For speaker system [A], set the surround back speaker parameters to “BTL for Front ” or “Bi-Amp for Front” and all the other speaker parameters to “Main ...

25 Connecting Speakers After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your TX-NR1000/TX-NR5000E.For the USA and Canadian models, you can also use banana plugs/connectors. Caution:Connect only speakers with an impedance between 4 and 16 Ω...

26 Connecting Speakers —Continued Use the SUBWOOFER PRE OUT A/B jack to connect a subwoofer with a built-in power amplifier. If your subwoofer does not have a built-in amplifier, connect an amplifier to the SUBWOOFER PRE OUT A/B jack and the subwoofer to the amplifier.You can connect two subwoofers ...

27 Connecting Speakers —Continued To get more powerful sound output, you can make the BTL (Bridged Transless) connection using the front and surround back speaker terminals on the TX-NR1000/TX-NR5000E. In this connection, two speaker outputs of the stereo amplifier will be used as mono output by com...

28 Connecting Antennas This chapter explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The supplied indoor FM antenna is for indoor use only. If you cannot achieve good reception with the supplied indoor F...

29 Connecting Antennas —Continued If you cannot achieve good reception with the supplied indoor FM antenna, try using a commercially available outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, but acceptable results can sometimes be obtained when installed in an attic or lo...

30 Connecting AV Components In addition to the conventional terminals, the TX-NR1000/TX-NR5000E has various terminals that are capable of next-generation digital transmission.Before connecting AV components to the TX-NR1000/TX-NR5000E, make sure that your cable type matches the ter-minal shape and t...

31 Connecting AV Components —Continued • When you play the audio signal from the DIGITAL IN terminals in Zone 2, the source will be downmixed into 2- channel analog audio signal and output to the AUDIO OUT terminals. • When you play the audio signal from the DIGITAL IN terminals in Zone 3, only the ...

32 Connecting AV Components —Continued • This section describes the connections for displaying the video source or the operating information of the TX-NR1000/TX-NR5000E on a monitor device such as a TV or projector. Before making a connection, check the terminal types on the monitor device and acqui...

33 Connecting AV Components —Continued • When connecting a DVD player to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct connections. • When you want to perform analog recording of the ...

34 Connecting AV Components —Continued • When connecting a DVD recorder or digital VCR to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct con-nections. • This section shows the connecti...

35 Connecting AV Components —Continued • When connecting a VCR to the TX-NR1000/TX-NR5000E, make connections for video and audio signals. Before making connections, refer to page 30 for correct connections. • This section shows the connection example when you use VIDEO 2 or VIDEO 3 as an input. In t...

36 Connecting AV Components —Continued REMOTECONTROL MAIN ZONE 3 ZONE 2 OUT IN FRONT L CENTER FRONT R SURR BACK R (ASSIGNABLE) SURR BACK L (ASSIGNABLE) SURR R SURR L I R 12V TRIGGER OUT RS 232 A B C D F G H I J K L A C B D E 200 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. “Net -Tune” is ...

37 Connecting AV Components —Continued • When connecting a DBS tuner, DBS TV, or BS/CS tuner to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct connections. • This section shows the con...

38 Connecting AV Components —Continued • When connecting a CD player to the TX-NR1000/TX-NR5000E, make connections using digital or analog termi- nals. Before making connections, refer to page 30 for correct connections. This section shows the connection exam-ple when you use the default audio input...

39 Connecting AV Components —Continued • When connecting a MD recorder, DAT deck or CD recorder to the TX-NR1000/TX-NR5000E, make connections using digital or analog terminals. Before making connections, refer to page 30 for correct connections. • Connect a cassette or DAT tape deck to TAPE1, and an...

40 Connecting AV Components —Continued What is i.LINK i.LINK is an appellation of IEEE1394, which is the digital interface standard defined by the Institute of Electrical and Electronics Engineers (IEEE).Connecting i.LINK (AUDIO)-supported devices allows high speed transfer of data such as digital s...

41 Connecting AV Components —Continued Interconnection of i.LINK (AUDIO)-supported Devices The i.LINK connection allows for data transfer, even if the TX-NR1000/TX-NR5000E is connected to other devices via another i.LINK (AUDIO)-supported device. You can connect up to 17 devices in a daisy chain (in...

42 Connecting AV Components —Continued How to Configure i.LINK Connections Selecting a Device When the i.LINK connection is ready, you can use the setup menu to select any device which is connected via i.LINK.Once you have configured the i.LINK setting, the next time you select the input source, it ...

43 Connecting AV Components —Continued About the HDMI (High Definition Multimedia Interface) The High Definition Multimedia Interface (HDMI) is an interface standard for next-generation TV, designed to connect between STB (Set Top Box) and display digitally in the home, responding to technological c...

44 Connecting AV Components —Continued Connection example when the source selection is performed on the TX-NR1000/TX-NR5000E REMOTECONTROL MAIN ZONE 3 ZONE 2 OUT IN AC INLET E) SURR L I R 12V TRIGGER OUT RS 232 J K A C B D E 200 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. AC 120V 60Hz SW...

45 Connecting Components not Reached by the Remote Controller Signals (IR IN/OUT) In order to use the remote controller to control the TX-NR1000/TX-NR5000E from a remote location, you will need to prepare a multiroom kit (sold sepa-rately) such as one listed below: • Onkyo’s Multi-Room System kits (...

46 Connecting Components not Reached by the Remote Controller Signals (IR IN/OUT) —Continued Effective Sensor Layout In this situation, you will need to use a commercially available IR emitter. Connect the mini plug of the IR emitter to the IR OUT terminal on the TX-NR1000/TX-NR5000E and then place ...

47 Connecting -compatible AV Components The terminal on the TX-NR1000/TX-NR5000E is for connecting other Onkyo components equipped with the same terminal. When a component is connected to the terminal, it can be operated by the remote controller supplied with the TX-NR1000/TX-NR5000E. In addition, w...

48 Basic Operation of Remote Controller Buttons The remote controller supplied with the TX-NR1000/TX-NR5000E is a multifunctional remote controller, so you can operate not only the TX-NR1000/TX-NR5000E but also AV components connected to the apparatus and components placed in another room. The basic...

49 Basic Operation of Remote Controller Buttons —Continued Before operating the connected component, follow the instructions on pages 124 through 133 to make appropriate settings using the remote controller. When you perform the procedures on the TX-NR1000/TX-NR5000E, press the [ZONE 2] (or [REC/ZON...

50 Connecting the Power/Basic Operations • Before you plug in the TX-NR1000/TX-NR5000E, confirm that all connections have been made properly.• Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit, such as computers. If this...

51 Connecting the Power/Basic Operations —Continued Before you can use the remote controller, you must perform steps 1 and 2 in the “Turning on the Power” section and place the TX-NR1000/TX-NR5000E in the standby state. Turning on the Power from the Remote Controller 1 Press the scroll wheel. “AMP” ...

52 Connecting the Power/Basic Operations —Continued Listening with Headphones To listen with headphones, plug a pair of headphones with a standard stereo plug into the PHONES jack on the TX-NR1000/TX-NR5000E front panel. • When you connect headphones, no sound will be heard from the speakers. • Whil...

53 Connecting the Power/Basic Operations —Continued Using the Sleep Timer (remote controller only) With the sleep timer you can set the TX-NR1000/TX-NR5000E so that it automatically turns off after a set period. Temporarily Changing the Speaker Output Levels (remote controller only) To change the in...

54 Connecting the Power/Basic Operations —Continued Switching the Display While listening to or watching an input source, you can display information regarding the type of source and sig-nal being input. When an input source other than FM or AM is selected: * When the input signal is digital audio o...

55 Connecting the Power/Basic Operations —Continued Changing the Audio Mode The TX-NR1000/TX-NR5000E accepts analog, digital, i.LINK (AUDIO), and multichannel signals for audio input. You can choose the kind of signal to be played for a specific device. For Zone 2, the TX-NR1000/TX-NR5000E accepts o...

56 Using the Listening Modes Types of Listening Modes Listening modes on the TX-NR1000/TX-NR5000E enable you to enjoy movie theater or concert hall qual-ity sounds in your room. The TX-NR1000/TX-NR5000E provides the following listening modes. Before playing a source in optimal sound, be sure to comp...

57 Using the Listening Modes —Continued DTS-ES Matrix This mode plays in 6.1 channels the music and movies recorded in DTS-ES. Sources recorded in DTS-ES include data for the surround back channel, and each channel is reproduced in 6.1 channels. This mode can be used with CDs, DVDs, and LDs with the...

58 Using the Listening Modes —Continued TV Logic This mode is suitable for television programs broadcast from studios. You may feel as if you are sitting in a tele-vision studio. All of the surround sounds are enhanced, and conversations are output clearly. Listening Modes for Listeners Using Headph...

59 Using the Listening Modes —Continued The TX-NR1000/TX-NR5000E provides various listen-ing modes. Note: The available modes depend on the input signal you selected. Operating on the TX-NR1000/TX-NR5000E Operating with the Remote Controller Tip: A table listed later in this manual shows which liste...

60 Listening to Radio Broadcasts One of the features of the TX-NR1000/TX-NR5000E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-NR1000/TX-NR5000E provides a number of listening modes perfect for listening to the radio and getting the most out of your a...

61 Listening to Radio Broadcasts —Continued Presetting a Radio Station Up to 40 stations can be stored in memory as preset radio stations. Selecting a Preset Radio Station When using the TX-NR1000/TX-NR5000E: When using the remote controller: Erasing a Preset Radio Station 1 Tune into the radio stat...

62 Listening to RDS Broadcasts (European models only) RDS reception is available only on the European model and only in areas where RDS broadcasts are available. What is RDS? RDS stands for Radio Data System and is a type of FM broadcasting. RDS was developed within the European Broadcasting Union (...

63 Listening to RDS Broadcasts (European models only) —Continued If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display on the TX-NR5000E. If the station does not, this function will be ignored. • If the current station you are listening t...

64 Enjoying Multichannel Playback To the TX-NR1000/TX-NR5000E, you can be con-nected up to two devices, such as a DVD player, that deal with multichannel sounds (5.1-7.1 channels). To use multichannel connections, you need to specify settings on the Input Setup menu. In addition, you can set listeni...

65 Enjoying Multichannel Playback —Continued You can also set the listening mode in advance for mul-tichannel playback (Listening Mode Preset). To do so, select “Input Setup” → “Listening Mode Preset” → “Multichannel” on the Setup menu to choose the pre-ferred mode. This defaults to “Multichannel.”S...

66 Enjoying Movies and Music in the Remote Zone (Zone 2/3) You can connect speakers and amplifiers for the remote zone, and enjoy different sources in a remote zone (Zone 2 or Zone 3). There are three ways to enjoy in a remote zone: When Connecting Only Speakers (Zone 2) • You can enjoy a different ...

67 Enjoying Movies and Music in the Remote Zone (Zone 2/3) —Continued When Connecting the Power Amplifier (Zone 2 or Zone 3) • You can enjoy a different source in a remote zone while a 7.1 channel source is being played in the main room. • Adjust the volume level on the TX-NR1000/ TX-NR5000E (not on...

68 Enjoying Movies and Music in the Remote Zone (Zone 2/3) —Continued Operating with the Remote Controller When operating with the remote controller, how to operate depends on the location of Zone 2 or Zone 3, or the distance from the TX-NR1000/TX-NR5000E. • Point the remote controller at the infrar...

69 Enjoying Movies and Music in the Remote Zone (Zone 2/3) — Continued Recording a Source The TX-NR1000/TX-NR5000E can not only record the playing source but can also record a source while play-ing another source. You can also combine a video and audio to create a new source. Signals that can be out...

70 Recording a Source —Continued Some steps can also be operated on the remote control-ler, but described here are operations on the TX-NR1000/TX-NR5000E. Notes: • No surround effects can be recorded. • No DVD or any sources whose copyright is protected can be recorded. • There are some restrictions...

72 Enjoying Net Audio A Net-Tune server is a computer server running Net-Tune system protocol, including a Net-Tune-compatible home server or a PC with Net-Tune Central installed.The TX-NR1000/TX-NR5000E can be used as a Net-Tune client on a standard Ethernet network. By install-ing Onkyo’s Net-Tune...

73 Enjoying Net Audio —Continued Notes: • To use Internet radio with the TX-NR1000/ TX-NR5000E, your broadband Internet connection needs to be up and running and able to access the Web. Please consult your ISP if you have any prob-lems with your Internet connection. • The TX-NR1000/TX-NR5000E uses D...

74 Enjoying Net Audio —Continued To select Net-Tune mode, press the [MODE] button, and then roll the scroll wheel until “NET-T” appears on the display. Note: While neither the [INPUT] button nor [MODE] button is illuminated, the scroll wheel changes the input source and remote controller mode simult...

76 Enjoying Net Audio —Continued To listen to Internet radio, the connection/configuration requirements listed on pages 72-73 must be satisfied. Enjoying Internet Radio 1 While neither the [INPUT] buttonnor [MODE] button is illuminated,roll the scroll wheel to selectIRD (Internet Radio). “NET-T” app...

77 Enjoying Net Audio —Continued Presetting Internet Radio Stations You can preset up to 30 Internet radio stations. Choosing a Preset Internet Radio Station Erasing a preset Internet radio station 7 Press the [ENTER] button. Buffering starts with the following mes-sage displayed. When the buffering...

78 Enjoying Net Audio —Continued To play music files saved on your PC, the requirements listed on page 72 must be satisfied. • To stop playback: Press the [ ] button on the remote controller. • To pause playback: Press the [ ] button on the remote controller. • To select a track: Press the [ ]/[ ] b...

79 Enjoying Net Audio —Continued Selecting a Track List You can use the music file data saved on the Net-Tune server to select which tracks to play. For example, you can: • Select a track list based on the album name • Select a track list based on the artist name • Select a track list based on the g...

80 Enjoying Net Audio —Continued The music server settings can be made while you select the music server as an input source. Configuring the Music Server 1 Press the [INPUT] button, andthen roll the scroll wheel to selectMSRV. Make sure that the “MSRV” is displayed when you configure the music serve...

81 Enjoying Net Audio —Continued Music Server Memo Internet Radio Memo

82 Setup Menu When making the various settings required to configure your TX-NR1000/TX-NR5000E for optimum performance, you can use either the OSD Menu that appears on your television monitor or you can use the display on the front of the TX-NR1000/TX-NR5000E. The OSD Menu is a settings menu that is...

84 Setup Menu —Continued OSD Map (MAIN B) Main B Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Preference 0.Hardware Setup ===================== 1.TV Format Setup 1.Speaker Setup ===================== 1.Speaker Impedance 2.Speaker Crossover 3.Speaker Dis...

85 Setup Menu —Continued OSD Map (ZONE 2) Zone 2 Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference Zone 2 Setup ===================== 0.Hardware Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference 0.Hardwa...

86 Setup Menu —Continued You can change Setup Menu settings using the buttons on the front panel and on the remote controller.The illustrations here represent the remote controller. When you perform settings using the buttons on the front panel, press the [SETUP] button first. Use the [SELECT/PRESET...

87 Hardware Setup In this section, you will perform the initial settings for the following scenarios.• When you want to change the TX-NR1000/TX-NR5000E’s remote control ID.• When you want to fix the TV Format setting to PAL or NTSC.• When you want to fix the AM Frequency Step setting to 9 kHz or 10 ...

88 Speaker/Output Setup The TX-NR1000/TX-NR5000E provides a wide range of variations in speaker connections and speaker settings, so you have to specify speaker settings according to conditions of each variation. For proper selection of an AV device connected at switching of the input type, you also...

89 Speaker/Output Setup —Continued Bi-Amp for Front: This setting can be made only when you set the “(Speaker B) Front L/R” setting to “Main A” or “Main B.” Select this when using the front speaker in main room B by connecting the front channel and the surround back channel to the speaker via Bi-Amp...

90 Speaker/Output Setup —Continued Perform the setup procedure below following the operating instructions described on page 86. 1. Select the unit of distance from “Unit.” You can select either “feet” or “meters.” The default varies depending on the region. 2. Set the distance you measured. Enter al...

91 Speaker/Output Setup —Continued This is for setting up a home theater with a THX-Ultra2 compliant speaker system. These settings will be effective in the listening mode for the THX Ultra2 Cinema and THX Music Mode. The settings in the THX Audio Setup sub-menu can be configured for both “Main A” a...

92 Speaker/Output Setup —Continued Zone 2 Out, Zone 3 Out This item is displayed when “Zone 2 Out” or “Zone 3 Out” is specified for Analog 1-5 above. The default setting for “Zone 2 Out” is “Pre Out (variable)” and for “Zone 3 Out” is “Line Out (fixed).” Pre Out (variable): Select this when you want...

93 Input Setup Items described here are set when you press the input source buttons. The TX-NR1000/TX-NR5000E is equipped with several types of jacks in addition to the standard audio and video jacks, and multiple jacks are provided for each type. You may freely assign input sources such as CD, PHON...

94 Input Setup —Continued Follow procedures below to change any setting: Hint: When you perform the procedures on the TX-NR1000/TX-NR5000E, after selecting the input source using the input source buttons, press the [SETUP] button. Next, select the menu you want to configure by turning the [SELECT/PR...

95 Input Setup —Continued Subwoofer Sensitivity The following are also settings for “Multichannel 1” or “Multichannel 2” (cannot be specified separately for each input source).Some DVD decks output the LFE channel at –15 dB lower than the other channels in the multichannel output.The level setting u...

96 Input Setup —Continued You can specify a listening mode you frequently use for each input source. When a picture you like and frequently watch is a Dolby Digital source, for example, you may specify “Dolby Digital,” and if a CD of classical music you are fond of is a PCM source, you can specify “...

97 Input Setup —Continued D.F. Mono Here, you can specify the listening mode for playing digital signals such as Dolby Digital and AAC recorded in monaural. This option can be set for Main B and Zone 2 as well as for Main A.You can select from the listening modes listed below: (Main A/B) Pure Audio,...

98 Input Setup —Continued When multiple devices are connected to the TX-NR1000/TX-NR5000E, the volume may vary for a device even when volume settings on the TX-NR1000/TX-NR5000E are identical.Reducing the variance in the volume level will allow you to enjoy sounds at the same volume level without ad...

99 Listening Mode Setup This menu allows you to configure the listening mode settings including audio effect and playback options. This sub-menu allows you to configure the audio effect and playback options when you play a source in the Mono listening mode. a. Re-EQ/Academy This option allows you to...

100 Listening Mode Setup —Continued Re-EQ On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater. Academy On: Lowers the treble level and filters the noise when the source contains emphasized treble sound and too much hiss, such as an old mo...

102 Listening Mode Setup —Continued • When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Configuration sub-menu differ, the available options will be “A” and “B.” A (Default): Outputs the source from the speakers connected to the SURR BACK L/R SPEAKERS A termina...

106 Listening Mode Setup —Continued g. Surr Bk Speaker This option configures the surround back speakers to use when the TX-NR1000/TX-NR5000E plays a Super Audio CD. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr ...

111 Listening Mode Setup —Continued PLIIx Game: Plays a 2ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Game mode. NEO:6 Cinema: Plays a 2ch source as a 6.1 or higher channel source using the DTS NEO:6NEO:6 Cinema mode. NEO:6 Music: Plays a 2ch source as a 6.1 or higher ch...

117 Listening Mode Setup —Continued A+B: Outputs the source from the speakers connected to the SURR L/R SPEAKERS A and SURR L/R SPEAKERS B terminals. e. Subwoofer This option configures the subwoofer to use when playing the source. Select the terminal to which the subwoofer you want to use is connec...

118 Audio Adjust You can adjust bass, mid, and treble notes for each speaker set. • For any speaker set to “Not Used” in the Speaker Configuration sub-menu, no associated setting item is displayed. Front Bass Option for adjusting bass notes from front L/R speakers. Specify at 1 dB intervals in a ran...

119 Preferences This menu allows you to configure the listening mode settings including audio effects and playback options. a. Volume Display You can switch the volume indication between an absolute value and a relative value. Absolute (absolute value): Displayed in a range from 0 to 100. Relative (...

120 i.LINK Setup This menu can be used when connecting to an Onkyo i.LINK (AUDIO)-ready device. a. Wakeup on i.LINK (IEEE1394) Specify connecting condition on standby of the TX-NR1000/TX-NR5000E. Enable: To be left connected. Disable (Default): To be disconnected while the TX-NR1000/TX-NR5000E is on...

121 Network Setup If using a broadband router (DHCP function), you need not perform “7. Network Setup” because the DHCP function on the TX-NR1000/TX-NR5000E is defaulted to “Enable.” When the DHCP function for the broadband router is set to “Disable,” network setup is required. In this case, you hav...

123 Lock/Version Setup The following sub-menus allow you to lock your settings or display the software version of the TX-NR1000/TX-NR5000E. a. Lock You can lock all of the setting menus to prevent settings from being changed by mistake. Locked: Powering on and off will resume the setting when it was...

125 Operating Onkyo Products Using the Remote Controller —Continued 1 ON button This button is used to turn on the DVD player. 2 STANDBY button This button is used to set the DVD player to Standby. 3 Number/letter buttons These buttons are used to enter title, chapter, and track numbers and to enter...

126 Operating Onkyo Products Using the Remote Controller —Continued CD mode is used to control an Onkyo CD player con- nected to the TX-NR1000/TX-NR5000E via . To select CD mode, press the [MODE] button, and then roll the scroll wheel until “CD” appears on the dis-play. Note: While neither the [INPU...

127 Operating Onkyo Products Using the Remote Controller —Continued F Play [ ] button This button is used to start CD playback. G Stop [ ] button This button is used to stop CD playback. H RANDOM button This button is used with the random playback func-tion. I MEMORY button This button is used with ...

128 Operating Onkyo Products Using the Remote Controller —Continued Tape mode is used to control an Onkyo cassette recorder connected to the TX-NR1000/TX-NR5000E via . To select Tape mode, press the scroll wheel, placing your remote controller into “AMP” mode . Note: While neither the [INPUT] button...

129 Using the Remote Controller with Other Components You can use the TX-NR1000/TX-NR5000E’s remote controller (RC-557M/558M) to control your other AV components, including those made by other manufac-turers. To do this you can:• Enter a remote control code for the component that you want to control...

130 Using the Remote Controller with Other Components —Continued Remote Control Codes When two or more codes are given, try each one in turn, and choose the one that works best. DVD (DVD player) Manufacturer Control code Aiwa 5010 Akai 5019 Apex 5015, 5016 CyberHome 5027 Denon 5017, 5020 GE 5003 Hit...

134 Using the Remote Controller with Other Components —Continued Controlling a Satellite Tuner 1. Roll the scroll wheel to select the input source and the remote controller mode for your satellite tuner. Perform this operation while both the [MODE] and[INPUT] buttons are not illuminated. If you want...

135 Using the Remote Controller with Other Components —Continued Controlling a TV 1. Roll the scroll wheel to select the input source and the remote controller mode for your TV. Perform this operation while both the [MODE] and[INPUT] buttons are not illuminated. If you want tooperate only the TV wit...

136 Using the Remote Controller with Other Components —Continued You can teach the TX-NR1000/TX-NR5000E’s remote controller new commands simply by transmitting com-mands from another remote controller one at a time. For example, by transmitting the Play and Stop commands from your CD player’s remote...

137 Using the Remote Controller with Other Components —Continued With the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. For example, normally you need to perform the following actions to use a CD player that’s connected to the TX-NR...

138 Using the Remote Controller with Other Components —Continued Running Macros Programmed macros can be run as follows. Naming Macros You can name your macros as follows. Names may con-tain of up to five characters. 1 Press the [MACRO] button. 2 Roll the scroll wheel to select the macro’s number, a...

139 Other Settings for the Remote Controller Adding New Remote Controller Modes You can add additional modes (DVD, TV, VCR, CBL, SAT) to the remote controller. This is useful if, for example, you have several DVD players or TVs. Reordering the Remote Controller Modes You can change the order in whic...

140 Other Settings for the Remote Controller —Continued Deleting Remote Controller Modes You can delete remote controller modes that you don’t need, such as modes for components that you don’t have.The AMP mode cannot be deleted. Assigning Remote Controller Modes You can change the combination in se...

141 Other Settings for the Remote Controller —Continued You can reset the remote controller to its default set-tings. You can set the remote controller’s transmission signal format to either infrared (IR) or radio frequency (RF). The default setting is IR.This is useful when, for example, the TX-NR1...

142 Other Settings for the Remote Controller —Continued This section explains how to change the remote control-ler’s ID. You may need to change this if the TX-NR1000/TX-NR5000E’s remote controller inter-feres with other Onkyo components located in the same room. Note: If you change the remote contro...

144 Relationship Between Input Source and Listening Mode —Continued *2 NEO:6-96k Button Input Signal Format DTS DTS96/24 Discrete/ Matrix Multichanne l (*/2) Multichannel (Other than */2) 2/0 1/0 Multichannel (*/2) Multichannel (Other than */2) Matrix 2ch 1/0 Type of source Listening mode DVD, LD, C...

146 Troubleshooting If you have any trouble using your TX-NR1000/TX-NR5000E, look for a solution in this section. If you can’t resolve the issue yourself, contact the dealer from whom you purchased this unit. Can’t turn on the TX-NR1000/TX-NR5000E? • Make sure that the power cord is properly plugged...

148 Troubleshooting —Continued Can’t learn commands from other remote control-lers? • Make sure that the transmitting ends of both remote con-trollers are pointing at each other. • Are you trying to learn from a remote controller that cannot be used for learning? Some commands cannot be learned, esp...

149 Troubleshooting —Continued “Not available with Headphones use” • Operation not allowed while a pair of headphones is con-nected. “Not available in this Sp Config” • Doesn’t work with the current speaker configuration. “Only available with Dolby D” • Can be used with only Dolby Digital. “Not avai...

150 Specifications General Amplifier Section Power Supply Rating North American and some Asian models: AC 120 V, 60 Hz European & Australian models: AC 230-240 V, 50 Hz Asian models: AC 220-230 volts, 50 Hz Consumption Power USA & Canadian models: 13.8 A European & Australian models: 1,2...

151 Specifications —Continued Tuner Section FM AM Specifications and features are subject to change without notice. Output Level and Impedance: Audio AUDIO 1-5: 200 mV, 470 Ω (Tape 1/2/ Video 1/2/3 Rec Out)100 mV, 470 Ω (Zone 2/3 Out (fixed))1 V, 470 Ω (Zone 2/3 Out (variable)) PRE OUT A: 1 V, 470 Ω...

SN 29343668 Printed in Japan D0409-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPANTel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ON...

5 Table of Contents —Continued About Network Configuration ........................ 73Using the Remote Controller ......................... 74Enjoying Internet Radio ................................. 76Playing a Music File Saved on the Net-Tune Server ...................................................

6 Features Amplifier Features • 192 kHz/24-Bit DAC for All Channels • Color-Coded Heavy Duty Dual Banana Plug Compatible Transparent Speaker Posts • Color-Coded 7.1 Multi-Channel Inputs and Pre Outs • Powered Zone 2 and Zone 3• 5 12V DC Trigger Outputs and 3 IR Inputs/ Outputs • Massive, Shielded To...

7 Features —Continued • Audiophile Grade Parts• IntelliVolume• Pure Audio Mode• Digital Upsampling• Absolute Ground Plate• Large, Fluorescent, 35 Dot Matrix Display With 4 Mode Dimmer • For Ultimate Control—The Last Remote You’ll Ever Need • A-Form Listening Mode Memory In catalogs and on packaging,...

8 Supplied Accessories Make sure you have the following accessories: Plug the supplied power cord into this AC INLET.• Do not use a power cord other than the one supplied with the TX-NR1000/TX-NR5000E. The power cord supplied is designed for use with the TX-NR1000/TX-NR5000E and should not be used w...

9 Before Using the TX-NR1000/TX-NR5000E Notes: • The supplied batteries should last for about six months, although this will vary with usage. • If the remote controller doesn’t work reliably, try replacing the batteries. • Don’t mix new and old batteries, or different types of batteries. • If you in...

10 Index Parts and Facilities Here is an explanation of the controls and displays on the front panel of the TX-NR1000/TX-NR5000E.The specifications for your model may differ due to regional requirements. Front Panels STANDBY/ON STANDBY PURE AUDIO MASTER VOLUME OPEN ZONE 2 ( ) GREEN MAIN ( ) BLUE REC...

11 Index Parts and Facilities —Continued For further operational instructions, see the pages indicated in brackets [ ]. 1 POWER switch (for all models other than USA, Canadian, and Australian models) [50] Press to turn on and off the main power supply for the TX-NR1000/TX-NR5000E. When the TX-NR1000...

12 Index Parts and Facilities —Continued Inner Panels TUNING MODE MEMORY SETUP EXIT PHONES VIDEO 7 INPUT S VIDEO DIGITAL AUDIO VIDEO L R LISTENING MODE AUDIO SELECTOR TONE CLEAR DIMMER ZONE 2 REC/ ZONE 3 LEVEL LEVEL SELECT/ PRESET CONTROL / TUNING PUSH TO ENTER PUSH TO ENTER TUNING MODE MEMORY SETUP...

13 Index Parts and Facilities —Continued A LISTENING MODE button [59] Press this button to enter the setup mode for the listening mode. Turning the [SELECT/PRESET] allows you to select the listening mode. To confirm your selection and exit the setup mode, press the [SELECT/PRESET]. B AUDIO SELECTOR ...

14 Index Parts and Facilities —Continued 1 ( ) i.LINK S400 (AUDIO) terminals Some of the Asian models are not equipped with the i.LINK(AUDIO) terminals.These connectors are for connecting to the i.LINK (AUDIO)-ready device using a 4-pin (S400) i.LINK (AUDIO) cable. The TX-NR1000/TX-NR5000E complies ...

15 Index Parts and Facilities —Continued B RS 232 This port is for connecting the TX-NR1000/TX-NR5000E to home automation and external controllers. C PRE OUT A/B To use the TX-NR1000/TX-NR5000E as a preamplifier, connect a power amplifier to this jack. D SPEAKERS A/B These terminals are for connecti...

16 Index Parts and Facilities —Continued The TX-NR1000/TX-NR5000E’s remote controller is a multipurpose device that can be used to control not just the TX-NR1000/TX-NR5000E but your other AV components as well. This section explains how its various operating modes can be used to control the TX-NR100...

17 Index Parts and Facilities —Continued E DIRECT button This button is used to select the Direct listening mode. F PURE A button This button is used to select the Pure Audio listen-ing mode. G TEST TONE, CH SEL, LEVEL– & LEVEL+ buttons These buttons are used to adjust the level of each speaker ...

18 Speaker Placement The TX-NR1000/TX-NR5000E has many excellent features to recreate a clear three-dimensional sound image and lively sound movement. This enables you to enjoy, at home, the rich sound effects of a live theater or concert hall performance.When playing a DVD, you can enjoy sound effe...

19 Speaker Placement —Continued To fully enjoy surround sound, the configuration and placement of the speakers used are important. Be sure to read through the descriptions in the previous page and shown below.This section provides the examples and descriptions that assume a typical situation. Front ...

20 Speaker Placement —Continued Subwoofer Using a subwoofer greatly improves the volume level and sound quality of bass sounds. The subwoofer effect depends not only on the listening position but also on the shape of the listening room.• In general, place the subwoofer in a corner of the room or at ...

21 Speaker Placement —Continued The following speaker placements will be available according to the number of speakers connected to the TX-NR1000/TX-NR5000E. For the number of speaker channel, _.1 ch represents a subwoofer. Key to abbreviations:FL : Front left speaker, FR : Front right speaker, C : ...

22 Speaker Placement —Continued The TX-NR1000/TX-NR5000E has two speaker terminal blocks for speaker system [A] and [B]. This allows you to build two 7.1 ch home theater systems, and various speaker placements and connections are also available. For example, some channels of either speaker system ca...

23 Speaker Placement —Continued Main room A: 7.1 ch speaker systems and the two additional front speakers (When you want to use speaker system [A] for movies and enjoy 7.1 surround sound and the two additional front speakers for classic music.) • Set all the zone parameters for speaker system [A] to...

24 Speaker Placement —Continued Main room A: 5.1 ch speaker system including the front speakers connected through the BTL or bi- amp connections • For speaker system [A], set the surround back speaker parameters to “BTL for Front ” or “Bi-Amp for Front” and all the other speaker parameters to “Main ...

25 Connecting Speakers After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your TX-NR1000/TX-NR5000E.For the USA and Canadian models, you can also use banana plugs/connectors. Caution:Connect only speakers with an impedance between 4 and 16 Ω...

26 Connecting Speakers —Continued Use the SUBWOOFER PRE OUT A/B jack to connect a subwoofer with a built-in power amplifier. If your subwoofer does not have a built-in amplifier, connect an amplifier to the SUBWOOFER PRE OUT A/B jack and the subwoofer to the amplifier.You can connect two subwoofers ...

27 Connecting Speakers —Continued To get more powerful sound output, you can make the BTL (Bridged Transless) connection using the front and surround back speaker terminals on the TX-NR1000/TX-NR5000E. In this connection, two speaker outputs of the stereo amplifier will be used as mono output by com...

28 Connecting Antennas This chapter explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The supplied indoor FM antenna is for indoor use only. If you cannot achieve good reception with the supplied indoor F...

29 Connecting Antennas —Continued If you cannot achieve good reception with the supplied indoor FM antenna, try using a commercially available outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, but acceptable results can sometimes be obtained when installed in an attic or lo...

30 Connecting AV Components In addition to the conventional terminals, the TX-NR1000/TX-NR5000E has various terminals that are capable of next-generation digital transmission.Before connecting AV components to the TX-NR1000/TX-NR5000E, make sure that your cable type matches the ter-minal shape and t...

31 Connecting AV Components —Continued • When you play the audio signal from the DIGITAL IN terminals in Zone 2, the source will be downmixed into 2- channel analog audio signal and output to the AUDIO OUT terminals. • When you play the audio signal from the DIGITAL IN terminals in Zone 3, only the ...

32 Connecting AV Components —Continued • This section describes the connections for displaying the video source or the operating information of the TX-NR1000/TX-NR5000E on a monitor device such as a TV or projector. Before making a connection, check the terminal types on the monitor device and acqui...

33 Connecting AV Components —Continued • When connecting a DVD player to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct connections. • When you want to perform analog recording of the ...

34 Connecting AV Components —Continued • When connecting a DVD recorder or digital VCR to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct con-nections. • This section shows the connecti...

35 Connecting AV Components —Continued • When connecting a VCR to the TX-NR1000/TX-NR5000E, make connections for video and audio signals. Before making connections, refer to page 30 for correct connections. • This section shows the connection example when you use VIDEO 2 or VIDEO 3 as an input. In t...

36 Connecting AV Components —Continued REMOTECONTROL MAIN ZONE 3 ZONE 2 OUT IN FRONT L CENTER FRONT R SURR BACK R (ASSIGNABLE) SURR BACK L (ASSIGNABLE) SURR R SURR L I R 12V TRIGGER OUT RS 232 A B C D F G H I J K L A C B D E 200 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. “Net -Tune” is ...

37 Connecting AV Components —Continued • When connecting a DBS tuner, DBS TV, or BS/CS tuner to the TX-NR1000/TX-NR5000E, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to page 30 for correct connections. • This section shows the con...

38 Connecting AV Components —Continued • When connecting a CD player to the TX-NR1000/TX-NR5000E, make connections using digital or analog termi- nals. Before making connections, refer to page 30 for correct connections. This section shows the connection exam-ple when you use the default audio input...

39 Connecting AV Components —Continued • When connecting a MD recorder, DAT deck or CD recorder to the TX-NR1000/TX-NR5000E, make connections using digital or analog terminals. Before making connections, refer to page 30 for correct connections. • Connect a cassette or DAT tape deck to TAPE1, and an...

40 Connecting AV Components —Continued What is i.LINK i.LINK is an appellation of IEEE1394, which is the digital interface standard defined by the Institute of Electrical and Electronics Engineers (IEEE).Connecting i.LINK (AUDIO)-supported devices allows high speed transfer of data such as digital s...

41 Connecting AV Components —Continued Interconnection of i.LINK (AUDIO)-supported Devices The i.LINK connection allows for data transfer, even if the TX-NR1000/TX-NR5000E is connected to other devices via another i.LINK (AUDIO)-supported device. You can connect up to 17 devices in a daisy chain (in...

42 Connecting AV Components —Continued How to Configure i.LINK Connections Selecting a Device When the i.LINK connection is ready, you can use the setup menu to select any device which is connected via i.LINK.Once you have configured the i.LINK setting, the next time you select the input source, it ...

43 Connecting AV Components —Continued About the HDMI (High Definition Multimedia Interface) The High Definition Multimedia Interface (HDMI) is an interface standard for next-generation TV, designed to connect between STB (Set Top Box) and display digitally in the home, responding to technological c...

44 Connecting AV Components —Continued Connection example when the source selection is performed on the TX-NR1000/TX-NR5000E REMOTECONTROL MAIN ZONE 3 ZONE 2 OUT IN AC INLET E) SURR L I R 12V TRIGGER OUT RS 232 J K A C B D E 200 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. 100 mA MAX. AC 120V 60Hz SW...

45 Connecting Components not Reached by the Remote Controller Signals (IR IN/OUT) In order to use the remote controller to control the TX-NR1000/TX-NR5000E from a remote location, you will need to prepare a multiroom kit (sold sepa-rately) such as one listed below: • Onkyo’s Multi-Room System kits (...

46 Connecting Components not Reached by the Remote Controller Signals (IR IN/OUT) —Continued Effective Sensor Layout In this situation, you will need to use a commercially available IR emitter. Connect the mini plug of the IR emitter to the IR OUT terminal on the TX-NR1000/TX-NR5000E and then place ...

47 Connecting -compatible AV Components The terminal on the TX-NR1000/TX-NR5000E is for connecting other Onkyo components equipped with the same terminal. When a component is connected to the terminal, it can be operated by the remote controller supplied with the TX-NR1000/TX-NR5000E. In addition, w...

48 Basic Operation of Remote Controller Buttons The remote controller supplied with the TX-NR1000/TX-NR5000E is a multifunctional remote controller, so you can operate not only the TX-NR1000/TX-NR5000E but also AV components connected to the apparatus and components placed in another room. The basic...

49 Basic Operation of Remote Controller Buttons —Continued Before operating the connected component, follow the instructions on pages 124 through 133 to make appropriate settings using the remote controller. When you perform the procedures on the TX-NR1000/TX-NR5000E, press the [ZONE 2] (or [REC/ZON...

50 Connecting the Power/Basic Operations • Before you plug in the TX-NR1000/TX-NR5000E, confirm that all connections have been made properly.• Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment on the same circuit, such as computers. If this...

51 Connecting the Power/Basic Operations —Continued Before you can use the remote controller, you must perform steps 1 and 2 in the “Turning on the Power” section and place the TX-NR1000/TX-NR5000E in the standby state. Turning on the Power from the Remote Controller 1 Press the scroll wheel. “AMP” ...

52 Connecting the Power/Basic Operations —Continued Listening with Headphones To listen with headphones, plug a pair of headphones with a standard stereo plug into the PHONES jack on the TX-NR1000/TX-NR5000E front panel. • When you connect headphones, no sound will be heard from the speakers. • Whil...

53 Connecting the Power/Basic Operations —Continued Using the Sleep Timer (remote controller only) With the sleep timer you can set the TX-NR1000/TX-NR5000E so that it automatically turns off after a set period. Temporarily Changing the Speaker Output Levels (remote controller only) To change the in...

54 Connecting the Power/Basic Operations —Continued Switching the Display While listening to or watching an input source, you can display information regarding the type of source and sig-nal being input. When an input source other than FM or AM is selected: * When the input signal is digital audio o...

55 Connecting the Power/Basic Operations —Continued Changing the Audio Mode The TX-NR1000/TX-NR5000E accepts analog, digital, i.LINK (AUDIO), and multichannel signals for audio input. You can choose the kind of signal to be played for a specific device. For Zone 2, the TX-NR1000/TX-NR5000E accepts o...

56 Using the Listening Modes Types of Listening Modes Listening modes on the TX-NR1000/TX-NR5000E enable you to enjoy movie theater or concert hall qual-ity sounds in your room. The TX-NR1000/TX-NR5000E provides the following listening modes. Before playing a source in optimal sound, be sure to comp...

57 Using the Listening Modes —Continued DTS-ES Matrix This mode plays in 6.1 channels the music and movies recorded in DTS-ES. Sources recorded in DTS-ES include data for the surround back channel, and each channel is reproduced in 6.1 channels. This mode can be used with CDs, DVDs, and LDs with the...

58 Using the Listening Modes —Continued TV Logic This mode is suitable for television programs broadcast from studios. You may feel as if you are sitting in a tele-vision studio. All of the surround sounds are enhanced, and conversations are output clearly. Listening Modes for Listeners Using Headph...

59 Using the Listening Modes —Continued The TX-NR1000/TX-NR5000E provides various listen-ing modes. Note: The available modes depend on the input signal you selected. Operating on the TX-NR1000/TX-NR5000E Operating with the Remote Controller Tip: A table listed later in this manual shows which liste...

60 Listening to Radio Broadcasts One of the features of the TX-NR1000/TX-NR5000E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-NR1000/TX-NR5000E provides a number of listening modes perfect for listening to the radio and getting the most out of your a...

61 Listening to Radio Broadcasts —Continued Presetting a Radio Station Up to 40 stations can be stored in memory as preset radio stations. Selecting a Preset Radio Station When using the TX-NR1000/TX-NR5000E: When using the remote controller: Erasing a Preset Radio Station 1 Tune into the radio stat...

62 Listening to RDS Broadcasts (European models only) RDS reception is available only on the European model and only in areas where RDS broadcasts are available. What is RDS? RDS stands for Radio Data System and is a type of FM broadcasting. RDS was developed within the European Broadcasting Union (...

63 Listening to RDS Broadcasts (European models only) —Continued If the station you are currently tuned into is broadcasting RT signals, they will be displayed in the front display on the TX-NR5000E. If the station does not, this function will be ignored. • If the current station you are listening t...

64 Enjoying Multichannel Playback To the TX-NR1000/TX-NR5000E, you can be con-nected up to two devices, such as a DVD player, that deal with multichannel sounds (5.1-7.1 channels). To use multichannel connections, you need to specify settings on the Input Setup menu. In addition, you can set listeni...

65 Enjoying Multichannel Playback —Continued You can also set the listening mode in advance for mul-tichannel playback (Listening Mode Preset). To do so, select “Input Setup” → “Listening Mode Preset” → “Multichannel” on the Setup menu to choose the pre-ferred mode. This defaults to “Multichannel.”S...

66 Enjoying Movies and Music in the Remote Zone (Zone 2/3) You can connect speakers and amplifiers for the remote zone, and enjoy different sources in a remote zone (Zone 2 or Zone 3). There are three ways to enjoy in a remote zone: When Connecting Only Speakers (Zone 2) • You can enjoy a different ...

67 Enjoying Movies and Music in the Remote Zone (Zone 2/3) —Continued When Connecting the Power Amplifier (Zone 2 or Zone 3) • You can enjoy a different source in a remote zone while a 7.1 channel source is being played in the main room. • Adjust the volume level on the TX-NR1000/ TX-NR5000E (not on...

68 Enjoying Movies and Music in the Remote Zone (Zone 2/3) —Continued Operating with the Remote Controller When operating with the remote controller, how to operate depends on the location of Zone 2 or Zone 3, or the distance from the TX-NR1000/TX-NR5000E. • Point the remote controller at the infrar...

69 Enjoying Movies and Music in the Remote Zone (Zone 2/3) — Continued Recording a Source The TX-NR1000/TX-NR5000E can not only record the playing source but can also record a source while play-ing another source. You can also combine a video and audio to create a new source. Signals that can be out...

70 Recording a Source —Continued Some steps can also be operated on the remote control-ler, but described here are operations on the TX-NR1000/TX-NR5000E. Notes: • No surround effects can be recorded. • No DVD or any sources whose copyright is protected can be recorded. • There are some restrictions...

72 Enjoying Net Audio A Net-Tune server is a computer server running Net-Tune system protocol, including a Net-Tune-compatible home server or a PC with Net-Tune Central installed.The TX-NR1000/TX-NR5000E can be used as a Net-Tune client on a standard Ethernet network. By install-ing Onkyo’s Net-Tune...

73 Enjoying Net Audio —Continued Notes: • To use Internet radio with the TX-NR1000/ TX-NR5000E, your broadband Internet connection needs to be up and running and able to access the Web. Please consult your ISP if you have any prob-lems with your Internet connection. • The TX-NR1000/TX-NR5000E uses D...

74 Enjoying Net Audio —Continued To select Net-Tune mode, press the [MODE] button, and then roll the scroll wheel until “NET-T” appears on the display. Note: While neither the [INPUT] button nor [MODE] button is illuminated, the scroll wheel changes the input source and remote controller mode simult...

76 Enjoying Net Audio —Continued To listen to Internet radio, the connection/configuration requirements listed on pages 72-73 must be satisfied. Enjoying Internet Radio 1 While neither the [INPUT] buttonnor [MODE] button is illuminated,roll the scroll wheel to selectIRD (Internet Radio). “NET-T” app...

77 Enjoying Net Audio —Continued Presetting Internet Radio Stations You can preset up to 30 Internet radio stations. Choosing a Preset Internet Radio Station Erasing a preset Internet radio station 7 Press the [ENTER] button. Buffering starts with the following mes-sage displayed. When the buffering...

78 Enjoying Net Audio —Continued To play music files saved on your PC, the requirements listed on page 72 must be satisfied. • To stop playback: Press the [ ] button on the remote controller. • To pause playback: Press the [ ] button on the remote controller. • To select a track: Press the [ ]/[ ] b...

79 Enjoying Net Audio —Continued Selecting a Track List You can use the music file data saved on the Net-Tune server to select which tracks to play. For example, you can: • Select a track list based on the album name • Select a track list based on the artist name • Select a track list based on the g...

80 Enjoying Net Audio —Continued The music server settings can be made while you select the music server as an input source. Configuring the Music Server 1 Press the [INPUT] button, andthen roll the scroll wheel to selectMSRV. Make sure that the “MSRV” is displayed when you configure the music serve...

81 Enjoying Net Audio —Continued Music Server Memo Internet Radio Memo

82 Setup Menu When making the various settings required to configure your TX-NR1000/TX-NR5000E for optimum performance, you can use either the OSD Menu that appears on your television monitor or you can use the display on the front of the TX-NR1000/TX-NR5000E. The OSD Menu is a settings menu that is...

84 Setup Menu —Continued OSD Map (MAIN B) Main B Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Preference 0.Hardware Setup ===================== 1.TV Format Setup 1.Speaker Setup ===================== 1.Speaker Impedance 2.Speaker Crossover 3.Speaker Dis...

85 Setup Menu —Continued OSD Map (ZONE 2) Zone 2 Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference Zone 2 Setup ===================== 0.Hardware Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference 0.Hardwa...

86 Setup Menu —Continued You can change Setup Menu settings using the buttons on the front panel and on the remote controller.The illustrations here represent the remote controller. When you perform settings using the buttons on the front panel, press the [SETUP] button first. Use the [SELECT/PRESET...

87 Hardware Setup In this section, you will perform the initial settings for the following scenarios.• When you want to change the TX-NR1000/TX-NR5000E’s remote control ID.• When you want to fix the TV Format setting to PAL or NTSC.• When you want to fix the AM Frequency Step setting to 9 kHz or 10 ...

88 Speaker/Output Setup The TX-NR1000/TX-NR5000E provides a wide range of variations in speaker connections and speaker settings, so you have to specify speaker settings according to conditions of each variation. For proper selection of an AV device connected at switching of the input type, you also...

89 Speaker/Output Setup —Continued Bi-Amp for Front: This setting can be made only when you set the “(Speaker B) Front L/R” setting to “Main A” or “Main B.” Select this when using the front speaker in main room B by connecting the front channel and the surround back channel to the speaker via Bi-Amp...

90 Speaker/Output Setup —Continued Perform the setup procedure below following the operating instructions described on page 86. 1. Select the unit of distance from “Unit.” You can select either “feet” or “meters.” The default varies depending on the region. 2. Set the distance you measured. Enter al...

91 Speaker/Output Setup —Continued This is for setting up a home theater with a THX-Ultra2 compliant speaker system. These settings will be effective in the listening mode for the THX Ultra2 Cinema and THX Music Mode. The settings in the THX Audio Setup sub-menu can be configured for both “Main A” a...

92 Speaker/Output Setup —Continued Zone 2 Out, Zone 3 Out This item is displayed when “Zone 2 Out” or “Zone 3 Out” is specified for Analog 1-5 above. The default setting for “Zone 2 Out” is “Pre Out (variable)” and for “Zone 3 Out” is “Line Out (fixed).” Pre Out (variable): Select this when you want...

93 Input Setup Items described here are set when you press the input source buttons. The TX-NR1000/TX-NR5000E is equipped with several types of jacks in addition to the standard audio and video jacks, and multiple jacks are provided for each type. You may freely assign input sources such as CD, PHON...

94 Input Setup —Continued Follow procedures below to change any setting: Hint: When you perform the procedures on the TX-NR1000/TX-NR5000E, after selecting the input source using the input source buttons, press the [SETUP] button. Next, select the menu you want to configure by turning the [SELECT/PR...

95 Input Setup —Continued Subwoofer Sensitivity The following are also settings for “Multichannel 1” or “Multichannel 2” (cannot be specified separately for each input source).Some DVD decks output the LFE channel at –15 dB lower than the other channels in the multichannel output.The level setting u...

96 Input Setup —Continued You can specify a listening mode you frequently use for each input source. When a picture you like and frequently watch is a Dolby Digital source, for example, you may specify “Dolby Digital,” and if a CD of classical music you are fond of is a PCM source, you can specify “...

97 Input Setup —Continued D.F. Mono Here, you can specify the listening mode for playing digital signals such as Dolby Digital and AAC recorded in monaural. This option can be set for Main B and Zone 2 as well as for Main A.You can select from the listening modes listed below: (Main A/B) Pure Audio,...

98 Input Setup —Continued When multiple devices are connected to the TX-NR1000/TX-NR5000E, the volume may vary for a device even when volume settings on the TX-NR1000/TX-NR5000E are identical.Reducing the variance in the volume level will allow you to enjoy sounds at the same volume level without ad...

99 Listening Mode Setup This menu allows you to configure the listening mode settings including audio effect and playback options. This sub-menu allows you to configure the audio effect and playback options when you play a source in the Mono listening mode. a. Re-EQ/Academy This option allows you to...

100 Listening Mode Setup —Continued Re-EQ On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater. Academy On: Lowers the treble level and filters the noise when the source contains emphasized treble sound and too much hiss, such as an old mo...

102 Listening Mode Setup —Continued • When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Configuration sub-menu differ, the available options will be “A” and “B.” A (Default): Outputs the source from the speakers connected to the SURR BACK L/R SPEAKERS A termina...

106 Listening Mode Setup —Continued g. Surr Bk Speaker This option configures the surround back speakers to use when the TX-NR1000/TX-NR5000E plays a Super Audio CD. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr ...

111 Listening Mode Setup —Continued PLIIx Game: Plays a 2ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Game mode. NEO:6 Cinema: Plays a 2ch source as a 6.1 or higher channel source using the DTS NEO:6NEO:6 Cinema mode. NEO:6 Music: Plays a 2ch source as a 6.1 or higher ch...

117 Listening Mode Setup —Continued A+B: Outputs the source from the speakers connected to the SURR L/R SPEAKERS A and SURR L/R SPEAKERS B terminals. e. Subwoofer This option configures the subwoofer to use when playing the source. Select the terminal to which the subwoofer you want to use is connec...

118 Audio Adjust You can adjust bass, mid, and treble notes for each speaker set. • For any speaker set to “Not Used” in the Speaker Configuration sub-menu, no associated setting item is displayed. Front Bass Option for adjusting bass notes from front L/R speakers. Specify at 1 dB intervals in a ran...

119 Preferences This menu allows you to configure the listening mode settings including audio effects and playback options. a. Volume Display You can switch the volume indication between an absolute value and a relative value. Absolute (absolute value): Displayed in a range from 0 to 100. Relative (...

120 i.LINK Setup This menu can be used when connecting to an Onkyo i.LINK (AUDIO)-ready device. a. Wakeup on i.LINK (IEEE1394) Specify connecting condition on standby of the TX-NR1000/TX-NR5000E. Enable: To be left connected. Disable (Default): To be disconnected while the TX-NR1000/TX-NR5000E is on...

121 Network Setup If using a broadband router (DHCP function), you need not perform “7. Network Setup” because the DHCP function on the TX-NR1000/TX-NR5000E is defaulted to “Enable.” When the DHCP function for the broadband router is set to “Disable,” network setup is required. In this case, you hav...

123 Lock/Version Setup The following sub-menus allow you to lock your settings or display the software version of the TX-NR1000/TX-NR5000E. a. Lock You can lock all of the setting menus to prevent settings from being changed by mistake. Locked: Powering on and off will resume the setting when it was...

125 Operating Onkyo Products Using the Remote Controller —Continued 1 ON button This button is used to turn on the DVD player. 2 STANDBY button This button is used to set the DVD player to Standby. 3 Number/letter buttons These buttons are used to enter title, chapter, and track numbers and to enter...

126 Operating Onkyo Products Using the Remote Controller —Continued CD mode is used to control an Onkyo CD player con- nected to the TX-NR1000/TX-NR5000E via . To select CD mode, press the [MODE] button, and then roll the scroll wheel until “CD” appears on the dis-play. Note: While neither the [INPU...

127 Operating Onkyo Products Using the Remote Controller —Continued F Play [ ] button This button is used to start CD playback. G Stop [ ] button This button is used to stop CD playback. H RANDOM button This button is used with the random playback func-tion. I MEMORY button This button is used with ...

128 Operating Onkyo Products Using the Remote Controller —Continued Tape mode is used to control an Onkyo cassette recorder connected to the TX-NR1000/TX-NR5000E via . To select Tape mode, press the scroll wheel, placing your remote controller into “AMP” mode . Note: While neither the [INPUT] button...

129 Using the Remote Controller with Other Components You can use the TX-NR1000/TX-NR5000E’s remote controller (RC-557M/558M) to control your other AV components, including those made by other manufac-turers. To do this you can:• Enter a remote control code for the component that you want to control...

130 Using the Remote Controller with Other Components —Continued Remote Control Codes When two or more codes are given, try each one in turn, and choose the one that works best. DVD (DVD player) Manufacturer Control code Aiwa 5010 Akai 5019 Apex 5015, 5016 CyberHome 5027 Denon 5017, 5020 GE 5003 Hit...

134 Using the Remote Controller with Other Components —Continued Controlling a Satellite Tuner 1. Roll the scroll wheel to select the input source and the remote controller mode for your satellite tuner. Perform this operation while both the [MODE] and[INPUT] buttons are not illuminated. If you want...

135 Using the Remote Controller with Other Components —Continued Controlling a TV 1. Roll the scroll wheel to select the input source and the remote controller mode for your TV. Perform this operation while both the [MODE] and[INPUT] buttons are not illuminated. If you want tooperate only the TV wit...

136 Using the Remote Controller with Other Components —Continued You can teach the TX-NR1000/TX-NR5000E’s remote controller new commands simply by transmitting com-mands from another remote controller one at a time. For example, by transmitting the Play and Stop commands from your CD player’s remote...

137 Using the Remote Controller with Other Components —Continued With the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. For example, normally you need to perform the following actions to use a CD player that’s connected to the TX-NR...

138 Using the Remote Controller with Other Components —Continued Running Macros Programmed macros can be run as follows. Naming Macros You can name your macros as follows. Names may con-tain of up to five characters. 1 Press the [MACRO] button. 2 Roll the scroll wheel to select the macro’s number, a...

139 Other Settings for the Remote Controller Adding New Remote Controller Modes You can add additional modes (DVD, TV, VCR, CBL, SAT) to the remote controller. This is useful if, for example, you have several DVD players or TVs. Reordering the Remote Controller Modes You can change the order in whic...

140 Other Settings for the Remote Controller —Continued Deleting Remote Controller Modes You can delete remote controller modes that you don’t need, such as modes for components that you don’t have.The AMP mode cannot be deleted. Assigning Remote Controller Modes You can change the combination in se...

141 Other Settings for the Remote Controller —Continued You can reset the remote controller to its default set-tings. You can set the remote controller’s transmission signal format to either infrared (IR) or radio frequency (RF). The default setting is IR.This is useful when, for example, the TX-NR1...

142 Other Settings for the Remote Controller —Continued This section explains how to change the remote control-ler’s ID. You may need to change this if the TX-NR1000/TX-NR5000E’s remote controller inter-feres with other Onkyo components located in the same room. Note: If you change the remote contro...

144 Relationship Between Input Source and Listening Mode —Continued *2 NEO:6-96k Button Input Signal Format DTS DTS96/24 Discrete/ Matrix Multichanne l (*/2) Multichannel (Other than */2) 2/0 1/0 Multichannel (*/2) Multichannel (Other than */2) Matrix 2ch 1/0 Type of source Listening mode DVD, LD, C...

146 Troubleshooting If you have any trouble using your TX-NR1000/TX-NR5000E, look for a solution in this section. If you can’t resolve the issue yourself, contact the dealer from whom you purchased this unit. Can’t turn on the TX-NR1000/TX-NR5000E? • Make sure that the power cord is properly plugged...

148 Troubleshooting —Continued Can’t learn commands from other remote control-lers? • Make sure that the transmitting ends of both remote con-trollers are pointing at each other. • Are you trying to learn from a remote controller that cannot be used for learning? Some commands cannot be learned, esp...

149 Troubleshooting —Continued “Not available with Headphones use” • Operation not allowed while a pair of headphones is con-nected. “Not available in this Sp Config” • Doesn’t work with the current speaker configuration. “Only available with Dolby D” • Can be used with only Dolby Digital. “Not avai...

150 Specifications General Amplifier Section Power Supply Rating North American and some Asian models: AC 120 V, 60 Hz European & Australian models: AC 230-240 V, 50 Hz Asian models: AC 220-230 volts, 50 Hz Consumption Power USA & Canadian models: 13.8 A European & Australian models: 1,2...

151 Specifications —Continued Tuner Section FM AM Specifications and features are subject to change without notice. Output Level and Impedance: Audio AUDIO 1-5: 200 mV, 470 Ω (Tape 1/2/ Video 1/2/3 Rec Out)100 mV, 470 Ω (Zone 2/3 Out (fixed))1 V, 470 Ω (Zone 2/3 Out (variable)) PRE OUT A: 1 V, 470 Ω...

SN 29343668 Printed in Japan D0409-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPANTel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ON...