Page 2 - Important Safeguards; WARNING; AVIS
2 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructio...
Page 3 - Precautions
3 1. Recording Copyright Recording of copyrighted material for other than personal use isillegal without permission of the copyright holder. 2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If powerdoes not come on, contact your Onkyo authorized service station. 3. Care...
Page 4 - Contents; Before using; Minimum speaker configuration for surround sound; Operating components not reached by the; If the remote controller signal does not reach the TX-
4 Contents Before using Important Safeguards ......................................... 2 Precautions ......................................................... 3 Contents .............................................................. 4 Features ...........................................................
Page 5 - Remote controller
5 Contents Remote controller Using remote controller ................................... 55 Overview ........................................................................ 55 Calling up a preset radio station .................................... 55 Controlling an Onkyo cassette tape deck ............
Page 6 - Features; Amplifier Features; Other Performance Features; Supplied accessories; THX Select
6 Features Amplifier Features ■ 110 Watts minimum of continuous RMSpower to each of the seven channels into 8 Ω from 20 Hz to 20 kHz with no more than 0.08 %THD (FTC rated) ■ 7 Channel Amplifier ■ Wide Range Amplifier Technology (WRAT) ■ Linear Optimum Gain Volume Circuitry ■ 192 kHz/24 Bit D/A Conv...
Page 7 - Installing the remote controller batteries; Remove the battery compartment cover by pressing; Before using this unit; Using the remote controller
7 Installing the remote controller batteries 1. Remove the battery compartment cover by pressing and sliding the cover. 2. Insert two AA (R6 or UM-3) batteries into the battery compartment. Carefully follow the polarity diagram(positive (+) and negative (–) symbols) inside thebattery compartment. 3....
Page 8 - Front panel facilities; Front panel; Front door
8 Front panel facilities Here is an explanation of the controls and displays on the front panel of the TX-DS898. Front panel Front panel display Rec out indicator Sleep indicator Listening mode or digital inputformat indicators Tuning indicators Multi function display Zone 2 indicator STANDBY/ON OFF...
Page 9 - Front display
9 Front panel facilities For operational instructions, see page indicated in brackets [ ]. POWER switch [25] Turns on and off the main power supply for the TX-DS898. STANDBY/ON button [25] When this button is pressed with the main power switch turned on,the TX-DS898 turns on and the display lights u...
Page 10 - CH
10 Remote controller SEND/LEARN indicator This indicator acts as a guide when commands are programmed intoor sent by the remote controller. It also warns the user when an erroris made or battery power is low. ON/STDBY button ON: Turns on the TX-DS898. STDBY: Places the TX-DS898 in the standby state....
Page 11 - LEVEL /ANGLE and LEVEL /SUBTITLE buttons
11 Remote controller AUDIO/TV/VCR button AUDIO/A: For selecting the audio input signal. The setting changes from “Auto” to “Multich” to “Analog” and back each time thisbutton is pressed. [51] TV/VCR: Must be preprogrammed for use in the TV and VCR modes. [62] LEVEL /ANGLE and LEVEL /SUBTITLE buttons...
Page 12 - Rear panel facilities; • Since an analog connection must be made when using REC OUT
12 Rear panel facilities Here is an explanation of the terminals found on the rear of the TX-DS898 and how they are used. Before connecting your audio andvideo components, be sure to read this section carefully and thenproceed to the explanations on how to connect each individualcomponent (see page ...
Page 13 - • When connecting a VCR or other video component, make sure
13 DIGITAL OUTPUT PRE OUT OPT 2 COAX 2 3 FRONT SUB SURR CENTER R L 1 1 SURR BACK / ZONE 2 MULTI CINPUT FRONT Front input Surround input Surround back Center Subwoofer R (red) L (white) R (red) L (white) R (red) L (white) 8 7 6 5 4 3 2 1 ANTENNA These jacks are for connecting the FM indoor antenna an...
Page 14 - Power on/ready function
14 DIGITAL OUTPUT PRE OUT DIGITAL INPUT OPT 2 COAX 2 3 1 2 3 4 FRONT SUB SURR CENTER R L 1 1 OPT GND SURR BACK / ZONE 2 MULTI CINPUT FRONT SUB SURR SURRBACK CENTER L R L (white) R (red) L (white) R (red) L (white) R (red) Center Front output Surround back Surround Subwoofer Rear panel facilities (RI...
Page 15 - Connections; Connecting your audio components; Digital Setup (see page
15 Connections Here is an explanation of how to connect the main components to theTX-DS898 in the standard manner. There are many ways that anyone component can be connected, and it is up to you to decide whichmethod best fits your situation. The directions given here are onlyone option and should o...
Page 16 - Video Setup; Connecting your video components; The flow of the video signals is as follows:; • The signal that comes in from VIDEO IN is sent to VIDEO OUT
16 Connections Video connection cable S video connection cable Component video connection cable : Signal flow Audio connection cable Left (white) Right (red) L R C R /P R C B /P B Y C R /P R C B /P B Y PRE FRONT SUB SURR R GND SURR BACK / ZONE 2 FRONT SUB SURR SURRBACK R DIGITAL OUTPUT DIGITAL INPUT...
Page 17 - Connecting a DVD recorder or other digital video
17 Connections With the initial settings of the TX-DS898, the DVD input sourceis set for digital input at the COAXIAL 1 jack. If the digital connection is made at a different jack, this must bechanged at the Setup menu: Input Setup → Digital Setup (see page 33). 5. Connecting a DVD recorder or other...
Page 18 - Video; Connecting a television monitor or projector
18 Connections N VIDEO 5 /VIDEO CAM INPUT S VIDEO AUDIO VIDEO L R DIGITAL Video output Analog output Right (red) Left (white) Digital output(optical) 10. Video camera/Video game(VIDEO 5/VIDEO CAM INPUT) S Video output PRE FRONT SUB SURR R GND SURR BACK / ZONE 2 FRONT SUB SURR SURRBACK R DIGITAL OUTP...
Page 19 - Connecting speakers; Ideal speaker configuration; Important points regarding speaker placement
19 Most dipoles have an arrow on them to indicate their orientationtowards the screen. So for the side dipoles, the arrows point forward.For the back dipoles, the arrows should point towards each other toachieve the correct acoustical phasing in the room. Connecting speakers 1 TV or screen 2 Front l...
Page 20 - • Be sure to connect the positive and negative cables for the; to; • To prevent damage to circuitry,; • When you are using only one speaker or when you wish to listen to
20 Connecting a subwoofer Use the PRE OUT SUBWOOFER jack to connect a subwoofer witha built-in power amplifier. If your subwoofer does not have a built-inamplifier, connect an amplifier to the PRE OUT SUBWOOFER jackand the subwoofer to the amplifier. Connecting the speaker cable 1. Strip away 5/8 in...
Page 21 - When using the ZONE 2 OUT terminals; Connect the TX-DS898 to the amplifier for the; Adjust the volume level at the amplifier.; Connect the TX-DS898 to the monitor for the remote; Outline; Powered Zone 2 setting in the Setup menu.
21 R L SURRBACK/ ZONE 2SPEAKERS When using the ZONE 2 OUT terminals When you have connected all the speakers for 7.1-channel audio inthe main room, connect the speakers as shown below.The ZONE 2 OUT terminal is a constant output. Connect to theLINE input of the amplifier (CD, tape, etc.). Adjust the...
Page 23 - Connecting antennas; Connecting the AM antenna cable; Connecting the included antennas; Connecting the FM indoor antenna:; Assembling the AM loop antenna
23 Strip away the insulation from the end ofthe cable, then fully insert the strippedend of the cable. (Indoor) AM loop antenna Connecting antennas Connecting the AM antenna cable 1. Press down the lever. 2. Insert the wire into the hole. 3. Release the lever. Insert into the hole. FM antenna Hint: ...
Page 24 - Connecting an AM outdoor antenna
24 Connecting antennas Outdoor antenna (Indoor)AM loop antenna To TV (or VCR) To receiver Connecting an AM outdoor antenna An outdoor antenna will be more effective if it is stretchedhorizontally above a window or outside. • Do not remove the AM loop antenna. • To avoid the risk of lightning and ele...
Page 25 - ON; Connecting the power
25 • The TX-DS898 is shipped with the main power (POWER) switch in the on position ( ON ). When the power cord is plugged in for the first time, the TX-DS898 will automaticallyenter the standby state and the STANDBY indicator will light(same condition after step 2 below). • Before you plug in the TX...
Page 26 - Setup menus; Advanced Menu
26 Setup menus When making the various settings required to configure your TX-DS898 optimally, you can either use the OSD menu that appears on yourtelevision monitor or you can use the display on the front of the TX-DS898. The OSD menu is a settings menu that is displayed on your TVmonitor. For use ...
Page 27 - Button on remote controller; Using the and cursor buttons, select the menu; Navigating through the Setup menu
27 Button on remote controller Button on TX-DS898 SETUP (upper edge ofENTER button) (lower edge ofENTER button) (left edge ofENTER button) (right edge ofENTER button) ENTER RETURN SETUP UP DOWN LEFT RIGHT ENTER RETURN Advanced Menu 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Pref...
Page 28 - Hardware Setup; ohms.” If the impedance of even one speaker is between 4 and 6; Hardware Setup menu; Select when you have a remote sensor for the remote
28 Hardware Setup 0-1. Speaker Impedance sub-menu Set the impedance level to match the specifications of the speakersyou are using.If the impedances of all speakers are between 6 and 16 Ω , select “6 ohms.” If the impedance of even one speaker is between 4 and 6 Ω , select “4 ohms.” Note: Before you...
Page 29 - Speaker Setup; Speaker Setup menu
29 Speaker Setup 1-1. Speaker Config sub-menu Here you will enter which speakers are connected and the size ofeach speaker. a. Subwoofer Yes: Select when a subwoofer is connected. No: Select when a subwoofer is not connected. b. Front Large: Select if the front speakers are large sized. Small: Selec...
Page 30 - Select if you will enter the distances in feet.
30 Speaker Setup a. Unit feet: Select if you will enter the distances in feet. meters: Select if you will enter the distances in meters. b. Front L/R Set the distance from the front left and right speakers to your normallistening position between 1 and 30 feet in 0.5-feet intervals (0.3 to 9meters i...
Page 31 - Calibrating the speaker levels
31 Speaker Setup a. Left Sound comes from the front left speaker. Adjust the sound levelbetween –12 and 12 decibels in 1-decibel intervals. b. Center Sound comes from the center speaker. Adjust the sound levelbetween –12 and 12 decibels in 1-decibel intervals. c. Right Sound comes from the front rig...
Page 32 - a. Bass Peak Level Limiter
32 Speaker Setup a. Bass Peak Level Limiter On: Select to set the bass peak level. When “On” is selected, the Peak Level setting appears below. Off: Select to turn off the bass peak level limiting function. 1-4. Bass Peak Level(Bass Peak Level Manager * ) sub-menu Setting the bass peak level is impo...
Page 33 - Input Setup; Initial settings for each input source
33 Input Setup Initial settings for each input source Input source Digital input CD OPTICAL 1 PHONO ---- FM AM TAPE OPTICAL 2 VIDEO 1 COAXIAL 2 VIDEO 2 COAXIAL 3 VIDEO 3 OPTICAL 3 VIDEO 4 OPTICAL 4 VIDEO 5 OPTICAL on front panel (fixed) DVD COAXIAL 1 ---- : Available for digital input but not set in...
Page 36 - Select to display the name you enter when the input source
36 Input Setup 2-4. Character Input sub-menu This sub-menu allows you to give names to the stations you havepreset for the AM/FM tuner, and to the input sources you haveconnected (excluding the tuner itself). Up to 10 characters can beentered for each name. For example, if you have a DVD connected t...
Page 37 - Relationship between input source and listening mode; * The 5.1-channel digital surround format has a variety of versions
37 Input Setup Relationship between input source and listening mode The listening modes that can be set are different for each input source format. Note:You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source. * The 5.1-ch...
Page 38 - Listening Modes; Subwoofer also can be used for playback.; DOLBY PRO LOGIC II; This mode can be used with VHS and DVD videos with the; Input source signals
38 Input Setup Listening Modes Mono This mode is for playing old movies whose sound is recorded inmonaural or playing left and right channels separately in the movieswhich contains the different language signals recorded intoindividual channels. This mode also allows you to listen to themultiplexed ...
Page 39 - Used for playing DTS source.
39 Input Setup Mono Movie This mode is suitable for playing back monaural recording such asold movie soundtracks. The center channel delivers the unprocessedoriginal sound, whereas the other channels deliver the center-channel sound processed with the appropriate reverberation. Thisallows you to enj...
Page 40 - Audio Adjust; Audio Adjust Setup menu; Parameter
40 Audio Adjust 3. Audio Adjust Setup menu Set the various parameters for the sound signals. Parameter SettingInitial value a Bass –12 to +12 0 b Treble –12 to +12 0 3-2. Surround Speakers This setting allows you to decide which speakers to output to whensurround back speakers are connected and you ...
Page 42 - d) Virtual Surr Level; d) Pro Logic II Music Panorama
42 Audio Adjust b) Center For systems that have a center speaker, the center channel signal canbe output from the center speaker. For instance, in systems where thefront left and right speakers are small, use of the center speaker mayprovide a better sound space. (If your system uses a center speake...
Page 44 - Preference; This displays the volume with a minimum of min (0)
44 Preference 4-1. Volume Setup sub-menu This sub-menu allows you to make various settings concerning thevolume control of the TX-DS898. a. Volume Display You can choose from two ways of displaying the volume setting onscreen. Absolute: This displays the volume with a minimum of min (0) for no sound...
Page 46 - Listening to Radio Broadcasts; button on the remote controller.; Tuning into a radio station; Press either the AM or FM input; Listening to a stereo radio station (FM mode); press the FM MODE button; on the
46 Listening to Radio Broadcasts One of the features of the TX-DS898 that is most frequently used isits ability to play FM and AM broadcast radio stations. The TX-DS898 provides a number of listening modes perfect for listening tothe radio and getting the most out of your audio system. Also, byprese...
Page 47 - Erasing a preset radio station; Presetting a radio station
47 Listening to Radio Broadcasts Erasing a preset radio station 1. Press the AM or FM button and press the PRESET / buttons to select the preset radio station that you want erase (see above). 2. Press and hold the MEMORY button and then press the FM MODE button. The selected preset station is erased...
Page 48 - Enjoying music or videos with the TX-DS898; Listening with headphones; Tone Control. This function only affects the front left and; Temporarily turning off the sound; To use the remote controller, first press the RCVR button.; Press the input source (or input selector on the; Turn on the corresponding component and play the; buttons on the remote controller or turn the; PHONES
48 Enjoying music or videos with the TX-DS898 Though the TX-DS898 is often used to listen to the radio, it does notshow you its true ability until it is used to play music or watchvideos, DVDs, and the like. The TX-DS898 has the latest in state-of-the-art features to play back today’s acoustic techn...
Page 49 - Changing the listening mode; SETUP; Entering names for input sources and tuner stations; To correct entered characters
49 Changing the listening mode To change the listening mode during playback, press the listeningmode buttons.The functions of the buttons on the TX-DS898 and those on theremote controller are the same. DIRECT/PURE AUDIO (DIRECT): Changes the listening mode directly to the Direct listening mode. If p...
Page 50 - Using the sleep time (remote controller only); Adjusting the brightness of the front display; Switching the display
50 Enjoying music or videos with the TX-DS898 Using the sleep time (remote controller only) The SLEEP button enables you to set the TX-DS898 to turn offautomatically after a specified time period. If you press it once, theTX-DS898 will turn off after 90 minutes. Each time it is pressedthereafter, th...
Page 51 - Changing the audio mode; Enjoying the multichannel output; AUDIO SELECTOR
51 Changing the audio mode Press the AUDIO SELECTOR button on the front panel (or AUDIObutton on the remote controller) to change the audio mode. Eachtime the button is pressed, the mode changes from “Auto” → “Multich” → “Analog” and back to “Auto.” The “Auto” audio mode is recommended for normal ci...
Page 52 - Enjoying music in the remote zone; Playing music using the buttons on the TX-DS898; Adjusting the volume for the remote zone; Selecting an input source:
52 Enjoying music in the remote zone Playing music using the buttons on the TX-DS898 1. Press the Zone 2 button on the TX-DS898. 2. Select a source. After pressing the Zone 2 button, you must press an input sourcebutton within 5 seconds. The Zone 2 indicator lights. ZONE 2 indicator To select the sa...
Page 53 - Recording a source; REC OUT
53 To record the input source signal you arecurrently watching or listening to This method outputs to the audio and video outputs the currentlyselected input source signal. This method allows you to a signalwhile you are actually listening to or watching it. 1. Select the input source to record by p...
Page 55 - Using remote controller; Overview; Calling up a preset radio station; Press the CH or button to select the desired; Controlling an Onkyo cassette tape deck; VOL
55 Using remote controller Overview The RC-460M remote controller is a useful tool to help you operatethe components of your home theater. To do so, first press the Modebutton that corresponds to the device you wish to control. Thensimply press the desired operation button and the component willoper...
Page 56 - Controlling an Onkyo CD player; STDBY
56 Controlling an Onkyo CD player The connector of the Onkyo compact disc player must be connected to the TX-DS898 (see page 14). 1. Press the CD MODE button. The CD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operationbuttons...
Page 57 - Controlling an Onkyo DVD player; DISC
57 Using remote controller Controlling an Onkyo DVD player The connector of the Onkyo DVD player must be connected to the TX-DS898 (see page 14). 1. Press the DVD MODE button. The DVD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are th...
Page 58 - Controlling an Onkyo MD recorder
58 Controlling an Onkyo MD recorder The connector of the Onkyo MD recorder must be connected to the TX-DS898 (see page 14). 1. Press the MD MODE button. The MD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operationbuttons that ...
Page 59 - Learning a pre-programming code; Find the 3-digit number for the brand name of the; DISPLAY
59 Learning a pre-programming code SEND/LEARNindicator Numeric keys Buttons thatcan be pre-programmed Learning a pre-programming code By learning a pre-programming code, you can make the RC-460Mremote controller able to operate a product from another brand. Thebuttons that are used for operation are...
Page 60 - Pre-programming codes; CABLE; SAT; DVD; TV; VCR
60 Pre-programming codes Learning a pre-programming code CABLE BRAND SETTING No. GENERALINSTRUMENTS 500 GEMINI 501 HAMLIN 502, 503, 504, 505 JERROLD 500, 506, 507, 508,509, 510, 511, 512,513, 514 MACOM 515, 516, 517 MAGNAVOX 518 OAK 519, 520, 521 PANASONIC 522, 523 PHILIPS 524, 525, 526, 527,528, 52...
Page 61 - Operating your programmed remote controller
61 Operating your programmed remote controller Numeric keys CABLE MODE (Cable Mode) 1. Press the CABLE MODE button. The CABLE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operationbuttons that can be used to control your cable TV un...
Page 63 - Programming procedure
63 Programming the commands of remote controllersfor other devices into the remote controller 5 to 15 cm(2 to 6 inches) Buttons that cannot be programmed. SEND/LEARNindicator MODEbuttons MODE buttons Programming procedure When programming the commands of another remote controller tothe RC-460M remot...
Page 65 - You can only erase memorized commands and not preset ones.; Press and hold down the desired MODE button for; • If no button is pressed for more than 30 seconds during the
65 Programming the commands of remote controllers for other devices into theremote controller SEND/LEARNindicator MODEbuttons SEND/LEARNindicator MODEbuttons Erasing the programmed command from onebutton You can only erase memorized commands and not preset ones. 1. Press and hold down the desired MO...
Page 66 - Using a Macro function; Programming a Macro function; What is a Macro function?; only pressing two buttons; MODE MACRO
66 Using a Macro function Programming a Macro function You can program a different macro into the MODE MACRO buttonfor each of the eight MODE buttons. The macro is then executed bypressing the appropriate MODE button and then pressing the MODEMACRO button. For example, to program the macro described...
Page 67 - Programming the Direct Macro function; DIRECT
67 Using a Macro function Programming the Direct Macro function With the direct macro function, you can program a series of buttonoperations as a macro into the DIRECT MACRO button so themacro can be executed with just one touch. Note that for the directmacro function, only one macro can be programm...
Page 68 - Erasing a macro from the MODE MACRO button; Press and hold down the desired MODE button,; Press and hold down any one of the eight MODE
68 Using a Macro function Erasing a macro from the MODE MACRO button 1. Press and hold down the desired MODE button, press the MODE MACRO button, and then releaseboth buttons. When you press the MODE button, it lights green and theSEND/LEARN indicator lights. When you press the MODEMACRO button, the...
Page 70 - Troubleshooting guide
70 FM/AM TUNER AM stations cannot be received. • AM loop antenna is not connected. ➞ Connect the included AM loop antenna to the AM antennaterminals. Buzzing noise on AM stations (particularly noticeable atnight or with weak stations). • Noise from electrical apparatus such as fluorescent lamp. ➞ Mo...
Page 71 - VIDEO and AUDIO; Desired picture does not appear.; REMOTE CONTROLLER; LATE NIGHT function cannot be used.; If one of the messages shown below appears; Multichannel audio is not output.
71 Troubleshooting guide VIDEO and AUDIO Desired picture does not appear. • Improper connection. ➞ Check the connection again. Insert the plugs and connectorscompletely. No OSD Menu display. • Improper connection. ➞ Check connections. • OSD Menu is displayed when monitor is connected to VIDEO or S V...
Page 72 - Specifications
http://www.onkyo.co.jp/ HOMEPAGE SN 29343172A D0108-2 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPANTel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.Tel: 201-785-2600 F...
Onkyo SKB-770
User Manual
Onkyo HT-R758
User Manual
Onkyo SKF-690
User Manual
Onkyo TX-SR313
User Manual
Onkyo SKW-204
User Manual
Onkyo HT-R591
User Manual
Onkyo HTX-22HDX
User Manual