Page 2 - Important Safeguards; WARNING; AVIS
2 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructio...
Page 3 - Precautions; FCC Information for User
3 A N T E N N AD I S C H A R G E U N I T( N E C S E C T I O N 8 1 0 - 2 0 ) G R O U N D I N G C O N D U C T O R S( N E C S E C T I O N 8 1 0 - 2 1 ) G R O U N D C L A M P S P O W E R S E R V I C E G R O U N D I N GE L E C T R O D E S Y S T E M( N E C A R T 2 5 0 , P A R T H ) N E C – N A T I O N A L...
Page 4 - Contents; Before using; Minimum speaker configuration for; Operating components not reached by the; If the remote controller signal does not reach; Setup and operation
4 Contents Before using Important Safeguards ......................................... 2 Precautions ......................................................... 3 Contents .............................................................. 4 Features ...........................................................
Page 5 - Remote controller; Declaration of Conformity
5 Contents Remote controller Using remote controller ................................... 56 Overview ........................................................................ 56 Calling up a preset radio station .................................... 56 Controlling an Onkyo cassette tape deck ............
Page 6 - Features; Amplifier Features; Other Performance Features; Supplied accessories
6 Features Amplifier Features ■ 100 W × 2 (Front)/100 W (Center)/100 W × 2 (Surround)/100 W (Surround Back) at 8 Ω , 20Hz-20kHz, 0.08% THD (FTC) ■ 135 W × 2 (Front)/135 W (Center)/135 W × 2 (Surround)/135 W (Surround Back) at 6 Ω (DIN) ■ 160 W × 2 (Front)/160 W(Center)/160 W × 2 (Surround)/160 W (Su...
Page 7 - Installing the remote controller batteries; Remove the battery compartment cover by pressing; Before using this unit; Using the remote controller
7 Installing the remote controller batteries 1. Remove the battery compartment cover by pressing and sliding the cover. 2. Insert two AA (R6 or UM-3) batteries into the battery compartment. Carefully follow the polarity diagram(positive (+) and negative (–) symbols) inside thebattery compartment. 3....
Page 8 - Front panel facilities; Front panel
8 Front panel facilities Here is an explanation of the controls and displays on the front panel of the TX-DS797. Front panel Front panel display Rec out indicator Sleep indicator Listening mode ordigital input formatindicators Tuning indicators Multi function display Zone 2 indicator STANDBY/ON OFF ...
Page 9 - Front display
9 Front panel facilities For operational instructions, see page indicated in brackets [ ]. POWER switch [23] Turns on and off the main power supply for the TX-DS797. STANDBY/ON button [23] When this button is pressed with the main power switch turned on,the TX-DS797 turns on and the display lights u...
Page 10 - CH
10 Remote controller SEND/LEARN indicator This indicator acts as a guide when commands are programmed intoor sent by the remote controller. It also warns the user when an erroris made or battery power is low. ON/STDBY button [23] ON: Turns on the TX-DS797. STDBY: Places the TX-DS797 in the standby s...
Page 11 - VOL
11 Remote controller VOL button [50, 53] For adjusting the volume. TEST/MENU button TEST: Outputs a test tone for setting speaker levels. Use this button in conjunction with the LEVEL / and CH SELbuttons to calibrate the speakers levels without entering the Setupmenu. When TEST button is pressed, th...
Page 12 - Rear panel facilities; • Since an analog connection must be made when using REC OUT
12 PRE OUT ANTENNA FRONT SUB SURR SURRBACK CENTER R L AUDIO R L PH CD OUT IN TAPE R L AUDIO VIDEO S VIDEO MONITOR OUT R L OUT IN OUT IN OUT IN IN IN ZONE 2 DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 AUDIO AUDIO VIDEO S VIDEO COMPONENT VIDEO Y P B P R OUTPUT INPUT 1 Y P B P R INPUT 2 Y P B P R L R L R AC OU...
Page 13 - • When connecting a VCR or other video component, make sure
13 PRE OUT FRONT SUB SURR CENTER R L SURR BACK / MULTI CINPUT FRONT 2 3 1 DIGITAL OUTPUT OPT COAX DIGITAL INPUT Front input Surround input Surround back Center Subwoofer R (red) L (white) R (red) L (white) R (red) L (white) 8 7 6 5 4 3 2 1 ANTENNA These jacks are for connecting the FM indoor antenna...
Page 15 - Connections; Connecting your audio components; Digital Setup (see page
15 Connections Here is an explanation of how to connect the main components to theTX-DS797 in the standard manner. There are many ways that anyone component can be connected, and it is up to you to decide whichmethod best fits your situation. The directions given here are onlyone option and should o...
Page 16 - Video Setup; Connecting your video components; The flow of the video signals is as follows:; • The signal that comes in from VIDEO IN is sent to VIDEO OUT
16 Connections Video connection cable S video connection cable Component video connection cable : Signal flow Audio connection cable Left (white) Right (red) L R P R P B Y P R P B Y PRE FRONT SUB SURR R GND FRONT SUB SURR SURRBACK R DIGITAL OUTPUT 2 3 1 2 3 1 OPT DIGITAL INPUT OPT COAX DIGITAL INPUT...
Page 17 - Connecting a DVD recorder or other digital video
17 Connections With the initial settings of the TX-DS797, the DVD input sourceis set for digital input at the COAX 1 jack. If the digital connection is made at a different jack, this must bechanged at the Setup menu: Input Setup → Digital Setup (see page 33). 5. Connecting a DVD recorder or other di...
Page 18 - Video; Connecting a television monitor or projector
18 Connections PRE FRONT SUB SURR R GND FRONT SUB SURR SURRBACK R DIGITAL OUTPUT 2 3 1 2 3 1 OPT DIGITAL INPUT OPT COAX DIGITAL INPUT SURRBACK TENNA DIO L PH CD OUT IN TAPE L AUDIO VIDEO S VIDEO MONITOR OUT R L OUT IN OUT IN OUT IN IN IN ZONE 2 DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 DIO AUDIO VIDEO S V...
Page 19 - Important points regarding speaker placement; Connecting speakers
19 Before connecting the speakers, place them correctly by consultingthe instruction manuals that came with them.For surround playback, the configuration and placement of yourspeakers are very important. For THX surround EX playback, we recommend that you use aTHX speaker system that is certified by...
Page 20 - • Be sure to connect the positive and negative cables for the; to; • To prevent damage to circuitry,; • When you are using only one speaker or when you wish to listen to
20 Connecting a subwoofer Use the PRE OUT SUBWOOFER jack to connect a subwoofer witha built-in power amplifier. If your subwoofer does not have a built-inamplifier, connect an amplifier to the PRE OUT SUBWOOFER jackand the subwoofer to the amplifier. Connecting the speaker cable 1. Strip away 5/8 in...
Page 21 - When using the ZONE 2 OUT terminals; Connect the TX-DS797 to the amplifier for the; Adjust the volume level at the amplifier.; Connect the TX-DS797 to the monitor for the remote
21 When using the ZONE 2 OUT terminals The ZONE 2 OUT terminal is a constant output. Connect to theLINE input of the amplifier (CD, tape, etc.). Adjust the volumewith the amplifier connected to the ZONE 2 OUT terminal. 1. Connect the TX-DS797 to the amplifier for the remote zone. 2. Connect the remo...
Page 23 - ON; Connecting the power
23 • The TX-DS797 is shipped with the main power (POWER) switch in the on position ( ON ). When the power cord is plugged in for the first time, the TX-DS797 will automaticallyenter the standby state and the STANDBY indicator will light(same condition after step 2 below). • Before you plug in the TX...
Page 24 - Connecting antennas; Connecting the AM antenna cable; Connecting the included antennas; Connecting the FM indoor antenna:; Assembling the AM loop antenna
24 RE OUT ANTENNA CENTER L AUDIO R L AM FM 75 FM Strip away theinsulation from the endof the cable, then fullyinsert the stripped endof the cable. (Indoor)AM loop antenna Connecting antennas Connecting the AM antenna cable 1. Press down the lever. 2. Insert the wire into the hole. 3. Release the lev...
Page 25 - Connecting an AM outdoor antenna; Connecting the antenna cable to the 75/300
25 Connecting antennas Outdoor antenna (Indoor)AM loop antenna To TV (or VCR) To receiver Connecting an AM outdoor antenna An outdoor antenna will be more effective if it is stretchedhorizontally above a window or outside. • Do not remove the AM loop antenna. • To avoid the risk of lightning and ele...
Page 26 - Setup menus; next to their
26 Setup menus When making the various settings required to configure your TX-DS797 optimally, you can either use the OSD menu that appears on yourtelevision monitor or you can use the display on the front of the TX-DS797. The OSD menu is a settings menu that is displayed on your TVmonitor. For use ...
Page 27 - Button on remote controller; Using the and cursor buttons, select the menu; Navigating through the Setup menu
27 Button on remote controller Button on TX-DS797 SETUP (upper edge ofENTER button) (lower edge ofENTER button) (left edge ofENTER button) (right edge ofENTER button) ENTER RETURN SETUP UP DOWN LEFT RIGHT ENTER RETURN Advanced Menu 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Pref...
Page 28 - Hardware Setup; Hardware Setup menu
28 Hardware Setup 0-1. Speaker Impedance sub-menu Set the impedance level to match the specifications of the speakersyou are using.If the impedances of all speakers are between 6 and 16 Ω , select “6 ohms.” If the impedance of even one speaker is between 4 and 6 Ω , select “4 ohms.” Note: Before you...
Page 29 - Speaker Setup; Speaker Setup menu
29 Speaker Setup 1-1. Speaker Config sub-menu Here you will enter which speakers are connected and the size ofeach speaker. a. Subwoofer Yes: Select when a subwoofer is connected. No: Select when a subwoofer is not connected. b. Front Large: Select if the front speakers are large sized. Small: Selec...
Page 31 - Calibrating the speaker levels
31 Speaker Setup Notes: • Speakers that you selected “No” or “None” for in the Speaker Config sub-menu will not appear. • To accurately set the output levels, it is recommended to use a handheld sound pressure level (SPL) meter. Set the meter to C-weighting and slow averaging. A Radio Shack ® SPL me...
Page 32 - a. Bass Peak Level Limiter
32 Speaker Setup a. Bass Peak Level Limiter On: Select to set the bass peak level. When “On” is selected, the Peak Level setting appears below. Off: Select to turn off the bass peak level limiting function. 1-4. Bass Peak Level(Bass Peak Level Manager * ) sub-menu Setting the bass peak level is impo...
Page 33 - Input Setup; Initial settings for each input source; Connect your digital components to any of the
33 Input Setup Initial settings for each input source Input source Digital input CD OPT 1 PHONO ---- FM AM TAPE OPT 2 VIDEO 1 COAX 2 VIDEO 2 COAX 3 VIDEO 3 OPT 3 VIDEO 4 ---- VIDEO 5 Optical on front panel (fixed) DVD COAX 1 ---- : Available for digital input but not set in initial settings. : Not a...
Page 36 - Select to display the name you enter when the input source
36 Input Setup 2-4. Character Input sub-menu This sub-menu allows you to give names to the stations you havepreset for the AM/FM tuner, and to the input sources you haveconnected (excluding the tuner itself). Up to 10 characters can beentered for each name. For example, if you have a DVD connected t...
Page 37 - Relationship between input source and listening mode; * The 5.1-channel digital surround format has a variety of versions
37 Input Setup Relationship between input source and listening mode The listening modes that can be set are different for each input source format. Note:You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source. * The 5.1-ch...
Page 38 - Listening Modes; Subwoofer also can be used for playback.; Input source signals
38 Input Setup Listening Modes MonoThis mode is for playing old movies whose sound is recorded inmonaural or playing left and right channels separately in the movieswhich contains the different language signals recorded intoindividual channels. This mode also allows you to listen to themultiplexed s...
Page 40 - Audio Adjust; Audio Adjust Setup menu; Parameter
40 Audio Adjust 3. Audio Adjust Setup menu Set the various parameters for the sound signals. Surround L/R: This outputs the sound to the surround left and right speakers as normal and outputs nothing to the surroundback speaker. Surround Back: This outputs the sound to the surround back speakers and...
Page 41 - or between –10 to 0 decibels in; Select this under normal circumstances.
41 Audio Adjust 3-4. DelayThis sub-menu gives you various ways to adjust the timing of theaudio output from the speakers to give certain soundfield effects orto adjust for unwanted asynchronous video and audio tracks.This sub-menu does not appear if “Direct” is selected as thelistening mode. Paramet...
Page 44 - Preference; This displays the volume with a minimum of min (0)
44 Preference 4-1. Volume Setup sub-menu This sub-menu allows you to make various settings concerning thevolume control of the TX-DS797. a. Volume DisplayYou can choose from two ways of displaying the volume setting onscreen. Absolute: This displays the volume with a minimum of min (0) for no sound ...
Page 46 - Listening to Radio Broadcasts; Tuning into a radio station; Press either the AM or FM input; Listening to a stereo radio station (FM mode); FM MODE
46 Listening to Radio Broadcasts One of the features of the TX-DS797 that is most frequently used isits ability to play FM and AM broadcast radio stations. The TX-DS797 provides a number of listening modes perfect for listening tothe radio and getting the most out of your audio system. Also, byprese...
Page 47 - Erasing a preset radio station; Presetting a radio station; FM AM
47 2. Press the PRESET / buttons and select the number of the desiredpreset station. Listening to Radio Broadcasts Erasing a preset radio station This can only be performed at the TX-DS797. 1. Press the AM or FM button and press the PRESET / buttons toselect the preset radio station thatyou want era...
Page 48 - Listening to RDS broadcasts; • In some cases, the characters displayed on the display of the TX-; PTY program types in Europe
48 Listening to RDS broadcasts (European models only) Listening to RDS broadcasts RDS reception is available only on the European model and only inareas where RDS broadcasts are available. What is RDS? RDS stands for Radio Data System and is a type of FM broadcasting.RDS was developed within the Eur...
Page 49 - PTY program type you desire.; Performing a PTY scan
49 3. Press the ENTER button. The TX-DS797 will scan until it reaches astation broadcasting traffic information. If“Not Found” appears on the display, a TPstation cannot be located. 2. Press the RT/PTY/TP button three times. Listening to RDS broadcasts Displaying Radio Text (RT) If the station you a...
Page 50 - Enjoying music or videos with the TX-DS797; Listening with headphones; Tone Control. This function only affects the front left and; Temporarily turning off the sound; To use the remote controller, first press the RCVR button.; Press the input source (or input selector on the; Turn on the corresponding component and play the; buttons on the remote controller or turn the; PHONES
50 Enjoying music or videos with the TX-DS797 Though the TX-DS797 is often used to listen to the radio, it does notshow you its true ability until it is used to play music or watchvideos, DVDs, and the like. The TX-DS797 has the latest in state-of-the-art features to play back today’s acoustic techn...
Page 51 - Changing the listening mode; DIRECT; Entering names for input sources and tuner stations; To correct entered characters
51 Changing the listening mode To change the listening mode during playback, press the listeningmode buttons.The functions of the buttons on the TX-DS797 and those on theremote controller are the same. DIRECT: Changes the listening mode directly to the Direct listening mode. If pressed, the listenin...
Page 52 - Using the sleep time (remote controller only); Adjusting the brightness of the front display; Switching the display
52 Enjoying music or videos with the TX-DS797 Using the sleep time (remote controller only) The SLEEP button enables you to set the TX-DS797 to turn offautomatically after a specified time period. If you press it once, theTX-DS797 will turn off after 90 minutes. Each time it is pressedthereafter, th...
Page 53 - Changing the audio mode; Enjoying the multichannel output; AUDIO SELECTOR
53 Changing the audio mode Press the AUDIO SELECTOR button on the front panel (or AUDIObutton on the remote controller) to change the audio mode. Eachtime the button is pressed, the mode changes from “Auto” → “Multich” → “Analog” and back to “Auto.” The “Auto” audio mode is recommended for normal ci...
Page 54 - Enjoying music in the remote zone; Playing music using the buttons on the TX-DS797; Selecting an input source:
54 Enjoying music in the remote zone Playing music using the buttons on the TX-DS797 1. Press the Zone 2 button on the TX-DS797. 2. Select a source. After pressing the Zone 2 button, you must press an input sourcebutton within 5 seconds. The Zone 2 indicator lights. ZONE 2 indicator To select the sa...
Page 55 - Recording a source; REC OUT
55 Recording a source Input source buttons STANDBY/ON OFF ON POWER STANDBY PHONES MASTER VOLUME FM AM PHONO C D TAPE VIDEO 4 VIDEO 5 VIDEO 3 VIDEO 2 VIDEO 1 DVD OFF ZONE 2 REC OUT DISPLAY DIMMER UPSAMPLING AUDIO SELECTOR ZONE 2 ( ) GRN REC ( ) RED S VIDEO AUDIO VIDEO L R DIGITAL CLEAR VCR 2 VCR 1 VI...
Page 56 - Using remote controller; Overview; Calling up a preset radio station; Press the CH or button to select the desired; Controlling an Onkyo cassette tape deck
56 Using remote controller Overview The RC-460M remote controller is a useful tool to help you operatethe components of your home theater. To do so, first press the Modebutton that corresponds to the device you wish to control. Thensimply press the desired operation button and the component willoper...
Page 57 - Controlling an Onkyo CD player
57 Controlling an Onkyo CD player The connector of the Onkyo compact disc player must be connected to the TX-DS797 (see page 14). 1. Press the CD MODE button. The CD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operationbuttons...
Page 58 - Controlling an Onkyo DVD player; DISC
58 Using remote controller Controlling an Onkyo DVD player The connector of the Onkyo DVD player must be connected to the TX-DS797 (see page 14). 1. Press the DVD MODE button. The DVD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are th...
Page 59 - Controlling an Onkyo MD recorder
59 Controlling an Onkyo MD recorder The connector of the Onkyo MD recorder must be connected to the TX-DS797 (see page 14). 1. Press the MD MODE button. The MD MODE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operationbuttons that ...
Page 60 - Learning a pre-programming code; Find the 3-digit number for the brand name of the
60 Learning a pre-programming code SEND/LEARNindicator Numeric keys Buttons thatcan be pre-programmed Learning a pre-programming code By learning a pre-programming code, you can make the RC-460Mremote controller able to operate a product from another brand. Thebuttons that are used for operation are...
Page 61 - Pre-programming codes; CABLE; SAT; DVD; TV; VCR
61 Pre-programming codes Learning a pre-programming code CABLE BRAND SETTING No. GENERALINSTRUMENTS 500 GEMINI 501 HAMLIN 502, 503, 504, 505 JERROLD 500, 506, 507, 508,509, 510, 511, 512,513, 514 MACOM 515, 516, 517 MAGNAVOX 518 OAK 519, 520, 521 PANASONIC 522, 523 PHILIPS 524, 525, 526, 527,528, 52...
Page 62 - Operating your programmed remote controller
62 Operating your programmed remote controller Numeric keys CABLE MODE (Cable Mode) 1. Press the CABLE MODE button. The CABLE button lights green. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operationbuttons that can be used to control your cable TV un...
Page 64 - Programming procedure
64 Programming the commands of remote controllersfor other devices into the remote controller 2 to 6 inches(5 to 15 cm ) Buttons that cannot be programmed. SEND/LEARNindicator MODEbuttons MODE buttons Programming procedure When programming the commands of another remote controller tothe RC-460M remo...
Page 66 - You can only erase memorized commands and not preset ones.; Press and hold down the desired MODE button for; • If no button is pressed for more than 30 seconds during the
66 Programming the commands of remote controllers for other devices into theremote controller SEND/LEARNindicator MODEbuttons SEND/LEARNindicator MODEbuttons Erasing the programmed command from onebutton You can only erase memorized commands and not preset ones. 1. Press and hold down the desired MO...
Page 67 - Using a Macro function; Programming a Macro function; What is a Macro function?; MODE MACRO
67 Using a Macro function Programming a Macro function You can program a different macro into the MODE MACRO buttonfor each of the eight MODE buttons. The macro is then executed bypressing the appropriate MODE button and then pressing the MODEMACRO button. For example, to program the macro described...
Page 68 - Programming the Direct Macro function
68 Using a Macro function Programming the Direct Macro function With the direct macro function, you can program a series of buttonoperations as a macro into the DIRECT MACRO button so themacro can be executed with just one touch. Note that for the directmacro function, only one macro can be programm...
Page 69 - Erasing a macro from the MODE MACRO button; Press and hold down the desired MODE button,; Press and hold down any one of the eight MODE
69 Using a Macro function Erasing a macro from the MODE MACRO button 1. Press and hold down the desired MODE button, press the MODE MACRO button, and then releaseboth buttons. When you press the MODE button, it lights green and theSEND/LEARN indicator lights. When you press the MODEMACRO button, the...
Page 71 - Specifications
71 Specifications AMPLIFIER SECTION Continuous Average Power output (FTC) All channels: 100 watts per channel min. RMS at8 ohms, 2 channels driven from 20Hz to 20 kHz with no more than0.08% total harmonic distortion.130 watts min. RMS at 6 ohms, 2channels driven from 1 kHz withno more than 0.1% tota...
Page 72 - Troubleshooting guide
72 Troubleshooting guide If a problem occurs while you are using the remote controller, firsttry to operate the controls on the front panel of the TX-DS797 tomake sure that it is not due to a malfunction (or worn out batteries) inthe remote controller. POWER Power shuts off immediately after power o...
Page 73 - VIDEO and AUDIO; Desired picture does not appear.; REMOTE CONTROLLER; LATE NIGHT function cannot be used.; If one of the messages shown below appears; Multichannel audio is not output.
73 Troubleshooting guide VIDEO and AUDIO Desired picture does not appear. • Improper connection. ➞ Check the connection again. Insert the plugs and connectorscompletely. No OSD Menu display. • Improper connection. ➞ Check connections. • OSD Menu is displayed when monitor is connected to VIDEO or S V...
Page 74 - Memo
Onkyo SKB-770
User Manual
Onkyo HT-R758
User Manual
Onkyo SKF-690
User Manual
Onkyo TX-SR313
User Manual
Onkyo SKW-204
User Manual
Onkyo HT-R591
User Manual
Onkyo HTX-22HDX
User Manual