Onkyo TA-RW544 - Manuals

6 To Play a Tape • Check once again that all connections have been completed exactly as indicated in the connections diagram and then plug in the AC power cord. • After turning the power on, the display illuminates and the g PAUSE indicator flashes (about 5 seconds). While the indicator is flashing,...

7 A A A A Recheck the tape direction settings (shownby the Deck A and Deck B directionindicators) before pressing the d or f button. The following explanation assumes that thetape direction is forward ( s ). Fast forward and rewind Make sure the tape is stopped before usingthe fast forward or rewind...

8 Recording With TA-RW544, both Deck A and Deck B can be used for recording. Three recording methods are possible.(A) Recording on a single cassette using Deck A or Deck B(B) Recording the same program simultaneously on cassettes in both Deck A and Deck B(C) Recording on two cassettes consecutively ...

9 Procedure for recording 1. Prepare for recording. (See page 8.)Note:With TA-RW544, when recording toDeck A only, do not insert a cassette inDeck B. In the “ b ” mode, recording in Deck B may start consecutively. 2. Press the DECK A/B button to select the appropriate Deck A orB, and press the RESET...

12 Tape Dubbing • The recording level will be fairly close to that of the tape in Deck A.• The Dolby NR System of Deck A is automatically used to record the tape in Deck B. If you wish to monitor the signal from a Dolby NR encoded tape during normal-speed dubbing, be sure to set the Dolby NR to matc...

13 Useful Recording Functions Inserting blank spaces betweensongs when editing tapes 1. Press the t t t t t button and the a or s button to begin recording. 2. Press ; button at any point during recording where you wantto enter a blank space about fiveseconds long. • The PLAY indicator flashs on and...

14 Connecting ONKYO Components for z Operation If this unit is properly connected to another ONKYO component bearing the z symbol, you will be able to control it using the other component’s remote control. For remote control operation The upper and lower remote control jackshave the same function.Fo...

15 A → B → A → B ⋅⋅⋅⋅ → A → B Reverse Mode Function • Recheck the tape travel direction settings (shown by the Deck A and Deck B direction indicators) before beginning playback or recording. • The following explanation assumes that cassette side A is facing outward.• There is a silent gap about ten ...

16 1. 2. No! No! No! No! A A B A A A Handling Cassette Tapes Examine cassette tapes carefully before using them with the TA-RW411. High positiondetection hole Maxell UDI Maxell UDII Maxell XS Metal position High position Normal position Erasure prevention Cassette tapes are constructed with erasurep...

17 This deck requires no lubrication. Head, Pinch Roller and Capstan Cleaning Playback sound quality can be greatly diminished if magneticparticles are allowed to accumulate on the recording/playbackhead or playback head. Be sure to clean the head periodically,normally 2 - 3 times a month, to mainta...

18 TA-RW544 Track Format: 4-track, 2-channels Erasure System: AC erase Tape Speed: 4.8 cm/sec. (1-7/8 i.p.s.)9.6 cm/sec. (3-3/4 i.p.s.) (high speeddubbing) Wow and Flutter: 0.07 % (WRMS) Frequency Response: 20 — 15,000 Hz (Normal)(30 — 14,000 Hz ± 3 dB) 20 — 16,000 Hz (High)(30 — 15,000 Hz ± 3 dB) 2...

19 The following guide lists problems which do not require professional servicing. If, however, the problem cannot be remedied using thisguide, contact an ONKYO authorized service center for assistance. • No power. Cause: Power cord plug is loose Remedy: Insert plug properly into outlet. • Playback ...

6 To Play a Tape • Check once again that all connections have been completed exactly as indicated in the connections diagram and then plug in the AC power cord. • After turning the power on, the display illuminates and the g PAUSE indicator flashes (about 5 seconds). While the indicator is flashing,...

7 A A A A Recheck the tape direction settings (shownby the Deck A and Deck B directionindicators) before pressing the d or f button. The following explanation assumes that thetape direction is forward ( s ). Fast forward and rewind Make sure the tape is stopped before usingthe fast forward or rewind...

8 Recording With TA-RW544, both Deck A and Deck B can be used for recording. Three recording methods are possible.(A) Recording on a single cassette using Deck A or Deck B(B) Recording the same program simultaneously on cassettes in both Deck A and Deck B(C) Recording on two cassettes consecutively ...

9 Procedure for recording 1. Prepare for recording. (See page 8.)Note:With TA-RW544, when recording toDeck A only, do not insert a cassette inDeck B. In the “ b ” mode, recording in Deck B may start consecutively. 2. Press the DECK A/B button to select the appropriate Deck A orB, and press the RESET...

12 Tape Dubbing • The recording level will be fairly close to that of the tape in Deck A.• The Dolby NR System of Deck A is automatically used to record the tape in Deck B. If you wish to monitor the signal from a Dolby NR encoded tape during normal-speed dubbing, be sure to set the Dolby NR to matc...

13 Useful Recording Functions Inserting blank spaces betweensongs when editing tapes 1. Press the t t t t t button and the a or s button to begin recording. 2. Press ; button at any point during recording where you wantto enter a blank space about fiveseconds long. • The PLAY indicator flashs on and...

14 Connecting ONKYO Components for z Operation If this unit is properly connected to another ONKYO component bearing the z symbol, you will be able to control it using the other component’s remote control. For remote control operation The upper and lower remote control jackshave the same function.Fo...

15 A → B → A → B ⋅⋅⋅⋅ → A → B Reverse Mode Function • Recheck the tape travel direction settings (shown by the Deck A and Deck B direction indicators) before beginning playback or recording. • The following explanation assumes that cassette side A is facing outward.• There is a silent gap about ten ...

16 1. 2. No! No! No! No! A A B A A A Handling Cassette Tapes Examine cassette tapes carefully before using them with the TA-RW411. High positiondetection hole Maxell UDI Maxell UDII Maxell XS Metal position High position Normal position Erasure prevention Cassette tapes are constructed with erasurep...

17 This deck requires no lubrication. Head, Pinch Roller and Capstan Cleaning Playback sound quality can be greatly diminished if magneticparticles are allowed to accumulate on the recording/playbackhead or playback head. Be sure to clean the head periodically,normally 2 - 3 times a month, to mainta...

18 TA-RW544 Track Format: 4-track, 2-channels Erasure System: AC erase Tape Speed: 4.8 cm/sec. (1-7/8 i.p.s.)9.6 cm/sec. (3-3/4 i.p.s.) (high speeddubbing) Wow and Flutter: 0.07 % (WRMS) Frequency Response: 20 — 15,000 Hz (Normal)(30 — 14,000 Hz ± 3 dB) 20 — 16,000 Hz (High)(30 — 15,000 Hz ± 3 dB) 2...

19 The following guide lists problems which do not require professional servicing. If, however, the problem cannot be remedied using thisguide, contact an ONKYO authorized service center for assistance. • No power. Cause: Power cord plug is loose Remedy: Insert plug properly into outlet. • Playback ...