Onkyo SL-107 - Manuals - manualsarea.com

Page 2 - Important Safety Instructions; WARNING; AVIS

En- 1 Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instr...

Page 3 - Precautions; Recording Copyright

En- 2 Precautions 1. Recording Copyright Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copy-right holder. 2. AC Fuse The AC fuse inside the SL-107 is not user-serviceable. If you cannot turn on the SL-107, contact your Onkyo dealer. 3. Car...

Page 4 - Features; • This subwoofer system is equipped with a; Supplied Accessories; Using cork spacers with SL-107; Contents; Declaration of Conformity

En- 3 Features • This subwoofer system is equipped with a built-in amplifier solely for the reproduction of the superbass range. • With the built-in left-right mixing circuit and cut-off filter, you can simply connect the unit to your existing system to enjoy powerful bass reproduction. Supplied Acc...

Page 5 - Controls; The unit is in Standby mode

En- 4 Controls 1 Standby/On indicator (STANDBY/ON) This indicator lights up when the power switch is set to the ON position.Red: The unit is in Standby mode Green: The unit is in Operational mode If the power is turned on, the SL-107 automatically enters Operational mode when a signal is input.The S...

Page 6 - Connections; Connecting to an amplifier’s SUBWOOFER; Using the SL-107 with an AV amplifier

En- 5 Connections For safety considerations, turn off the power to this unit and all other system components before you connect or disconnect any component. When using the SL-107 in conjunction with an AV amplifier or receiver that features surround capability, connect the SL-107 to SUBWOOFER PREOUT...

Page 7 - —Continued; Connecting to speaker terminals on an; • Connecting the speaker cables

En- 6 Connections —Continued Connecting to speaker terminals on an amplifier (or receiver) 1. Using the speaker cables, connect the SL-107 SPEAKER LEVEL INPUT terminals to the ampli-fier’s speaker terminals. 2. Using the speaker cables, connect the right and left speakers to the SL-107 SPEAKER LEVEL...

Page 8 - • Adjust the SL-107 output level and crossover fre-; Placement

En- 7 Subwoofer effects Adding a subwoofer to your speaker system expands the bandwidth of the bass range. However, if the sub-woofer’s reproduction bandwidth or sound output level is improperly adjusted, the overall performance may decrease, as shown in the graphs below. When the subwoofer’s reprod...

Page 9 - Troubleshooting; The unit does not turn on; Specifications

En- 8 Troubleshooting The unit does not turn on • The power plug is not fully inserted. ➞ Insert the power plug fully into the power outlet. No sound is output • The OUTPUT LEVEL knob is set to the MIN level. ➞ Set the OUTPUT LEVEL knob properly. • Pin connector cable(s) are disconnected at the LINE...