Onkyo RC-482M - Manuals

67 Entering a pre-programming code SEND/LEARNindicator Numeric keys Buttons thatcan be pre-programmed The remote controller has three learning functions. One is enteringthe pre-programmed code for a remote controller of anothermanufacturer. Another is the normal learning function that enablesthe rem...

68 Pre-programming codes Note:If more than one code is given in the table,try each code one by one until you reach acode that works (i.e. if the first code doesnot work, then try the next). DVD BRAND SETTING No. DENON 602, 609 HITACHI 603 JVC 604 KENWOOD 605 MAGNAVOX 606, 613 MARANTZ 607 MITSUBISHI ...

69 Numeric keys Numeric keys Video cassetterecorderoperationbuttons Operating your programmed remote controller After entering a pre-programming by following the proceduregiven above, the following modes become enabled for use. DVD MODE (DVD Player Mode) Operations are the same as explained on page ...

70 Programming the commands of remote controllers forother devices into the remote controller 2 to 6 inches(5 to 15 cm ) Buttons that cannot be programmed. SEND/LEARNindicator MODEbuttons MODE buttons Programming procedure When programming the commands of another remote controller tothe RC-482M/480M...

73 Using the macro function What is the macro function? A macro function enables you to program a series of buttonoperations (up to 16) on the remote controller into a single button.The series of operations are then called a macro. For example, toplay a compact disc player connected to the TX-SR700/...

74 MODE buttons ENTER MACRO 2 MACRO 1 Erasing a macro from the MACRO 1 (or 2) button 1. Press and hold down any one of the six MODE buttons, press the MACRO 1 (or 2) button, and thenrelease both buttons. When you press the MODE button, it lights green and theSEND/LEARN indicator lights. When you pre...