Onkyo HT-S5300 - Manuals

5 En Installing the Batteries Note • If the remote controller doesn’t work reliably, try replacing the batteries. • Don’t mix new and old batteries or different types of batteries. • If you intend not to use the remote controller for a long time, remove the batteries to prevent damage from leak-age ...

6 En Features AV Receiver HT-R580 • 130 Watts/Channel @ 6 ohms• 160 Watts/Channel @ 6 ohms (JEITA)• WRAT–Wide Range Amplifier Technology (5 Hz to 100 kHz bandwidth) • Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power Supply) Massive High Power Transformer • HDMI (Ver.1.4 with Audio Return ...

7 En Front & Rear Panels North American models Asian models The actual front panel has various logos printed on it. They are not shown here for clarity.The page numbers in parentheses show where you can find the main explanation for each item. a ON/STANDBY button ( ➔ 21 ) b STANDBY indicator ( ➔...

8 En For detailed information, see the pages in parentheses. a Audio input indicators b Listening mode and format indicators ( ➔ 22 , 28 ) c Audyssey indicators ( ➔ 37 ) d Tuning indicators ( ➔ 24 ) e RDS indicator (excluding North American models) ( ➔ 25 ) f SLEEP indicator ( ➔ 23 ) g MUTING indica...

9 En Speaker Package For detailed information, see the pages in parentheses. ■ Front a STANDBY/ON indicator With the Auto Standby function, the SKW-580 auto-matically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-580 automatically enters...

10 En Remote Controller For detailed information, see the pages in parentheses. a ON/STANDBY button ( ➔ 21 ) b REMOTE MODE / INPUT SELECTOR buttons ( ➔ 22 ) c SP LAYOUT button ( ➔ 23 ) d Arrow q / w / e / r and ENTER buttons e SETUP button ( ➔ 33 ) f LISTENING MODE buttons ( ➔ 28 ) g DIMMER button (...

11 En About Home Theater Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—just like being in a movie theater or concert hall. With Blu-ray Discs, you can enjoy DTS and Dolby Digital. With analog or digital TV, you can enjoy ...

12 En Connecting the AV Receiver Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. For 7.1-channel surround-sound playback, you need seven speakers and a powered subwoofer. *1 If you’re using only one surround back spea...

13 En Connecting the Speaker Cables Screw-type speaker terminals Using Banana Plugs (North American models) • If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.• Do not insert the speaker code directly into the center hole of the speaker terminal. Push-type...

14 En The speakers can easily be wall mounted by using the key-hole slots. To prevent the speaker from vibrating against the wall, attach two of the supplied thick rubber stoppers to the rear of each speaker. To mount the front, surround and surround back speakers vertically, use the keyhole slot sh...

15 En Connected image with AV components • Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power cord until you’ve completed and double-checked all AV connections.• Push plugs in all the way to make good connections (loose connections can cause...

16 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ 34 ). Refer to “About HDMI” ( ➔ 60 ) and “Using an RIHD-compatible TV, Player, or Recorder” ( ➔ 61 ). Tip To listen to audio received by the HDMI IN jacks through ...

17 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ 34 ). *1 Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially available phono preamp. If y...

18 En Note • When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be given a higher priority. • The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks. With u (Remote Interactive), you ca...

19 En This section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Caution • Be careful that you don’t injure yourself when using thumbtacks. No...

20 En The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Note The on-screen setup menus are displayed when: • There is no video ...

21 En Turning On/Off the AV Receiver Turning On Press ON/STANDBY on the front panel. or Press RECEIVER followed by ON/STANDBY on the remote controller. The AV receiver comes on, the display lights, and the STANDBY indicator goes off. Turning Off Press ON/STANDBY on the front panel or the remote cont...

22 En Basic Operations ■ Operating on the AV receiver ■ Operating with the remote controller Note • When the subwoofer volume level is set to a positive (+) value, the maximum master volume level is reduced proportionally. To set the level of the subwoofer, use the OUTPUT LEVEL control. Because our ...

23 En You can temporarily mute the output of the AV receiver. Tip • To unmute, press MUTING again or adjust the volume. • The Mute function is cancelled when the AV receiver is set to Standby. With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. Tip •...

24 En Listening to the Radio With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection.This model changes FM/AM frequency in 200/10kHz (or 50/9kHz) steps.In manual tuning mode, FM stations will be in mono. Listening to the Rad...

25 En You can store a combination of up to 40 of your favorite FM/AM radio stations as presets. Selecting Presets Tip • You can also use the remote controller’s number buttons to select a preset directly. Deleting Presets When tuned into an RDS station, the RDS indicator lights. What is RDS? RDS sta...

26 En Displaying Radio Text (RT) Note • The message “ Waiting ” may appear while the AV receiver waits for the RT information. • If the message “ No Text Data ” appears on the display, no RT information is available. Finding Stations by Type (PTY) You can search for radio stations by type. Listening...

27 En Recording This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources. Connecting a Recording Component Note • The AV receiver must be turned on for recording. Recording is not possible while i...

28 En Using the Listening Modes See “About Listening Modes” for detailed information about the listening modes ( ➔ 29 ). Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the listening modes intended f...

29 En The AV receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidel-ity and stunning surround sound. Explanatory Notes ■ Input Source The following audio formats are supported by the listening mode. ■ Speaker Layout The illustration shows w...

30 En Listening Modes Listening Mode Description Input Source Speaker Layout Direct In this mode, audio from the input source is output without surround-sound processing. The “ Sp Config ” (presence of speakers), “ Sp Distance ” and “ A/V Sync ” settings are enabled, but much of the processing set v...

32 En Onkyo-Original DSP Listening Modes Note *1 When the input source contains the encoded front high channel, front high speakers output the sound. *2 If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used. *3 Surround back speakers are not supported. *...

33 En Advanced Setup Note The on-screen setup menus are displayed when: • There is no video input, or• The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various settings. Settings are or...

34 En Explanatory Notes Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.Here are the default assignme...

36 En Menu Sp Distance Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener’s ears as the sound designer intended. ■ Unit ` feet : Distances can be set in feet. Range: 1ft to 30ft in 1 foot steps. ` meters : Distanc...

37 En ■ Dimension ` –3 to 0 to +3 With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic IIx Music listening mode. Higher settings move the sound field backward. Lower settings move it forward.If the stereo image feels too wide, or there’s too much surroun...

38 En ■ Reference Level Audyssey Dynamic EQ™ Reference Level Offset ` 0 dB : It should be used when listening to movies. ` 5 dB : Select this setting for content that has a very wide dynamic range, such as classical music. ` 10 dB : Select this setting for jazz or other music that has a wider dynami...

39 En Menu Name Edit You can enter a preset name for each individual input selector for easy identification. When entered, the preset name will appear on the display. ■ Name ` - - - , Blu-ray , DVD , HD DVD , VCR , DVR , Tivo , CableSTB , SAT STB , PS3 , Wii , Xbox , PC , TV , CD , TAPE , iPod : To ...

40 En Menu HDMI Setup ■ Audio TV OUT ` Off : HDMI audio is not output. ` On : HDMI audio is output. This preference determines whether audio received at the HDMI IN is output by the HDMI OUT . You may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to t...

41 En Note • The “ Power Control ” setting can be set only when the above “ HDMI Control ” setting is set to “ On ”. • HDMI power control only works with p -compatible components that support it and may not work properly with some components due to their settings or compatibility. • When set to “ On...

42 En Audyssey Settings ■ Dynamic EQ ■ Dyn Vol (Dynamic Volume) See “Dynamic EQ” and “Dynamic Volume” of “Audio Adjust” ( ➔ 37 ). Late Night Function With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at...

43 En A/V Sync When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. ■ A/V Sync ` 0 ms to 100 ms in 10 ms steps Note • A/V Sync is disabled when the Direct liste...

44 En Zone 2 In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. There are two ways you can connect Zone 2 speakers:1. Connect them directly to the AV receiver.2. Connect them to an amp in...

45 En If you’ve connected your Zone 2 speakers to the AV receiver, as explained in “Connecting Your Zone 2 Speak-ers Directly to the AV receiver” ( ➔ 44 ), you must set the “ Front High/Zone2 ” setting to “ Zone2 ”. Menu Hardware Note • When “ Zone2 ” is selected and Zone 2 turned on, the Zone 2 spe...

46 En Controlling Zone 2 with the Remote Controller Note • To control Zone 2, you must press the remote controller’s ZONE2 first. Adjusting the Volume for Zone 2 ■ Operating with the remote controller ■ Operating on the AV receiver If your Zone 2 speakers are connected to a receiver or inte-grated a...

47 En Controlling iPod Models sold are different depending on the region. Connecting an Onkyo Dock A *1 B No. Onkyo Dock Cable Note Page A UP-A1 Dock (Included)(Universal Port Option Dock) — • When UP-A1 Dock that seated iPod is connected, the power consumption on standby mode slightly increases. • ...

48 En UP-A1 Dock With the supplied UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great sound.You can use the AV receiver’s remote controller to operate your iPod. ■ Compatible iPod models Made for:• All iPhone models• iPod touc...

49 En ■ Charging Your iPod models Battery The UP-A1 Dock charges your iPod models battery while your iPod is in the UP-A1 Dock and connected to the UNIVERSAL PORT jack on the AV receiver. While your iPod is seated in the UP-A1 Dock, its battery will be charged when the AV receiver is set to “On” or ...

51 En Controlling Other Components You can use the AV receiver’s remote controller (RC-764M) to control your other AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, TV, CD, etc. The following REMOTE ...

52 En If you want to control an Onkyo component by pointing the remote controller directly at it, use the following remote control codes: ` 32900 : Onkyo Blu-ray Disc player ` 32901 : Onkyo HD-DVD player ` 70868 : Onkyo MD recorder ` 71323 : Onkyo CD recorder ` 82990 : Onkyo Dock Note • If you conne...

54 En Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue your-self, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The STANDBY indicator flashes red ■ There’s no sound, or it’s very quiet ■ Only the front s...

55 En ■ Only the center speaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The front high or surround back speakers produce no sound ■ The subwoofer produces no sound ■ There’s no sound with a certain signal format ■ Can’t get 6.1/7.1 playback ■ ...

57 En ■ The AV receiver unexpectedly selects your iPod as the input source ■ Can’t record ■ There’s no sound ■ The sound changes when I connect my headphones ■ How do I change the language of a multiplex source ■ The u functions don’t work ■ The functions Auto Power On/Standby and Direct Change don’...

58 En Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. AV receiver Rated Output Power All channels: (North American)130 watts minimum co...

59 En ■ Subwoofer (SKW-580) ■ Front Speaker (SKF-580) ■ Center Speaker (SKC-580) ■ Surround/Surround Back Speaker (SKR-580/SKB-580) Specifications and features are subject to change without notice. 7.1ch Home Theater Speaker Package Type Bass-reflex Input sensitivity/Impedance 140 mV/20 k Ω Maximum ...

60 En About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc players/DVD players, set-top boxes, and other video components. Until now, several separate video and au...

61 En Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of th...

62 En ■ How to connect and setup 1 Confirm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel (ARC) functio...