Page 2 - Introduction; Important Safety Instructions; WARNING; AVIS
2 En Introduction Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the ma...
Page 3 - Precautions; For Canadian Models
3 En Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —...
Page 4 - Supplied Accessories; Make sure you have the following accessories:; Installing the batteries; Aiming the remote controller
4 En Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color. ■ Installing the batteries Note • If the remote controller doesn’t wo...
Page 5 - Contents
5 En Contents Important Safety Instructions ......................................... 2Precautions....................................................................... 3Supplied Accessories ...................................................... 4Features ..............................................
Page 6 - Features; Amplifier
6 En Features Amplifier • 130 Watts/Channel @ 6 ohms• 130 Watts/Channel @ 6 ohms (IEC)• 160 Watts/Channel @ 6 ohms (JEITA)• Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power Supply) Massive High Power Transformer Processing • HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color *1 , Lip Sy...
Page 7 - Front Panel; t u
7 En Front & Rear Panels The page numbers in parentheses show where you can find the main explanation for each item. a 8 ON/STANDBY button ( 18 ) b HDMI THRU indicator ( 42 ) c SUBWOOFER LEVEL buttons ( 43 ) d Remote control sensor ( 4 ) e LISTENING MODE buttons ( 27 ) f Display ( 8 ) g DIMMER b...
Page 8 - For detailed information, see the pages in parentheses.; HDMI input indicator; Display
8 En For detailed information, see the pages in parentheses. a HDMI input indicator b Listening mode and format indicators ( 27 , 32 ) c Audyssey indicator ( 24 , 39 ) Dynamic EQ indicator ( 39 ) Dynamic Vol indicator ( 39 ) d Tuning indicators ( 21 ) e RDS indicator (Asian models) ( 22 ) f SLEEP in...
Page 9 - Rear Panel; to
9 En a DIGITAL IN COAXIAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c HDMI IN and OUT jacks d FM ANTENNA jack and AM ANTENNA terminal e SUBWOOFER PRE OUT jack f SPEAKERS terminals ( FRONT , CENTER , SURROUND , SURROUND BACK or FRONT HIGH ) g Power cord (North American and Asian models) h ...
Page 10 - Remote Controller; Controlling the AV Receiver
10 En Remote Controller For detailed information, see the pages in parentheses. a 8 button ( 18 ) b REMOTE MODE/INPUT SELECTOR buttons ( 19 , 47 to 48 ) c TONE and Tone Level buttons ( 43 ) d Arrow q / w / e / r and ENTER buttons e SETUP button ( 34 ) f LISTENING MODE buttons ( 27 ) g DIMMER button ...
Page 11 - Connections; Connecting the AV Receiver; Connecting the Speaker Cables; SURROUND BACK or FRONT HIGH L; Screw-type speaker terminals; Connecting Your Speakers
11 En Connections Connecting the AV Receiver Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals. Tip • You can specify wh...
Page 12 - Speaker Configuration; Speaker Connection Precautions
12 En Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.To get the best from your surround sound system, you n...
Page 13 - About AV Connections; HDMI cable
13 En Connected image with AV components • Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power cord until you’ve completed and double-checked all AV connections.• Push plugs in all the way to make good connections (loose connections can cause...
Page 14 - HDMI OUT; of the; ” is set to “; On; Connecting Components with HDMI
14 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ page 35 ). See also: • “Connection Tips and Video Signal Path” ( ➔ page 54 ) • “About HDMI” ( ➔ page 56 ) • “Using an RIHD-compatible TV, Player, or Recorder” ( ➔ ...
Page 15 - How to record the video; See “Recording” to make a connection for video recording (; Connecting Your Components
15 En Connect your components to the appropriate jacks. The default input assignments are shown below. ✔ : Assignment can be changed ( ➔ page 35 ). *1 When USB input is selected, you can input video signals from the AUX INPUT VIDEO jack. Video signals input from AUX INPUT VIDEO will be output from t...
Page 16 - Connecting Onkyo; Make the; Connecting a Recording Component
16 En With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , if the AV receiver is on Standby, it will automatically turn on and select that component as the input source. ■ Direct Change When playb...
Page 17 - • Before connecting the power cord, connect all of your; Connecting Antenna; Asian models; • Be careful that you don’t injure yourself when; AC INLET
17 En This section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Note • Once your AV receiver is ready for use, you’ll need to tune into a rad...
Page 18 - Turning On & Basic Operations; Turning On/Off the AV Receiver; Turning On; RECEIVER; Turning Off; or; RECEIVER; RECEIVER
18 En Turning On & Basic Operations Turning On/Off the AV Receiver Tip • See “Auto Standby” about a power management setting ( ➔ page 41 ). Turning On 1 Press 8 ON/STANDBY on the front panel. or Press RECEIVER followed by 8 on the remote controller. The AV receiver comes on, the display lights. ...
Page 19 - Playback; Playing the Connected Component; • “Playing USB Device” (; Controlling Contents of USB Devices
19 En Playback ■ Operating with the remote controller ■ Operating on the AV receiver See “Controlling Other Onkyo Components” about the operation of other components ( ➔ page 47 ). The on-screen menus appear only on a TV that is connected to the HDMI OUT . If your TV is connected to the MONITOR OUT ...
Page 20 - Standard Mode control; Understanding Icons on the Display; ” appears on the display.
20 En Note • The buttons you can use will differ depending on the devices and media used for playback. This section describes icons that appear on the display during media playback. This section explains how to play music files on the iPod/iPhone.Compatible iPod/iPhone modelsMade for:iPod touch (1st...
Page 21 - Extended Mode control; Using the Tuner; Playing USB Device; Listening to AM/FM Radio; indicator
21 En Extended Mode control The content information is displayed (lists are displayed) on-screen, and you can control the content while looking at the screen.Top screen list:Playlists, Artists, Albums, Genres, Songs, Composers, Shuffle Songs, Now Playing This section explains how to play music files...
Page 22 - Presetting AM/FM Stations
22 En ■ Manual tuning mode In manual tuning mode, FM stations will be in mono. ■ Tuning into stations by frequency You can tune into AM and FM stations directly by entering the appropriate frequency. Presetting AM/FM Stations You can store a combination of up to 40 of your favorite AM/FM radio stati...
Page 23 - PRESET
23 En ■ Displaying Radio Text (RT) ■ Finding Stations by Type (PTY) You can search for radio stations by type. ■ Listening to Traffic News (TP) You can search for stations that broadcast traffic news. RDS program types (PTY) 1 Press RT/PTY/TP once. The RT information scrolls across the display. Note...
Page 24 - Using Basic Functions; Measurement procedure; Using the Automatic Speaker Setup
24 En Using Basic Functions With the supplied calibrated microphone, Audyssey 2EQ ® automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position.Au...
Page 25 - The speaker setting menu appears.; Audyssey 2EQ
25 En Note • You can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone. • Do not connect or disconnect any speakers during Audyssey 2EQ Room Correction and Speaker Setup. • If the AV receiver is muted, it will be unmuted...
Page 26 - Error Messages; Changing the Speaker Setup Manually
26 En Error Messages While Audyssey 2EQ ® Room Correction and Speaker Setup is in progress, one of the error messages below may appear. The options are: ` Retry : Try again. ` Cancel : Cancel Audyssey 2EQ Room Correction and Speaker Setup. • Ambient noise is too high. The background noise is too lou...
Page 27 - Selecting Listening Modes; Listening Mode Buttons; About Listening Modes; Explanatory Notes; Using the Listening Modes; MUSIC; a b
27 En Selecting Listening Modes See “Listening Modes” for detailed information about the listening modes ( ➔ page 28 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the listening modes intended ...
Page 28 - Input Source; The following audio formats are supported by the listening mode.; Speaker Layout
28 En Input Source The following audio formats are supported by the listening mode. Speaker Layout The illustration shows which speakers are activated in each channel. See “Sp Config (Speaker Configuration)” for the speaker setup ( ➔ page 36 ). ■ Onkyo-Original DSP Listening Modes A This is mono (mo...
Page 29 - Listening Modes
29 En ■ Listening Modes Listening Mode Description Input Source Speaker Layout Direct In this mode, audio from the input source is output without surround-sound processing. The speaker configuration (presence of speakers) and speaker distance settings are enabled, but much of the processing set via ...
Page 30 - • The listening modes cannot be selected with some source formats.
30 En Note *1 These listening modes cannot be selected during USB or iPod playback. *2 When the input source contains the encoded front high channel, front high speakers output the sound. *3 If there are no surround back speakers, Dolby Pro Logic II is used. *4 Surround back speakers are not support...
Page 31 - Using the Home Menu
31 En The Home menu provides you quick access to frequently used menus without having to go through the long standard menu. This menu enables you to change settings and view the current information. Note *1 Depending on the input source and listening mode, not all channels shown here output the soun...
Page 32 - Setting the Display Brightness; Changing the Input Display; Using the Music Optimizer
32 En You can adjust the brightness of the AV receiver’s display. You can display various information about the current input source as follows. The following information can typically be displayed. Tip • Alternatively, you can use the AV receiver’s DISPLAY . *1 When AM or FM radio is used, the band...
Page 33 - Muting the AV Receiver; Using Headphones; Recording
33 En You can temporarily mute the output of the AV receiver. This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources. AV Recording Audio sources can be recorded to a recorder (e.g., cassette tap...
Page 34 - Advanced Operations; Advanced Setup; On-screen Setup Menus; Common Procedures in Setup Menu; RETURN
34 En Advanced Operations Advanced Setup Note • The on-screen setup menus are displayed when: – There is no video input, or– The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various set...
Page 35 - OPTICAL1; HDMI Input
35 En Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.Here are the default assignments. ■ BD/DVD , VC...
Page 36 - Large
36 En Menu Sp Config Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Speaker Setup. This section explains how to specify which speake...
Page 37 - Unit; Subwoofer; Multiplex/Mono Settings; Multiplex; Audio Adjust
37 En Menu Sp Distance Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener’s ears as the sound designer intended. ■ Unit ` feet : Distances can be set in feet. Range: 1ft to 30ft in 1 foot steps. ` meters : Distanc...
Page 38 - Dolby Settings; DTS Setting
38 En Dolby Settings ■ PLIIx Music (2ch Input) These settings apply to only 2-channel stereo sources.If you’re not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx. Panorama ` On ` Off Turn this setting on to broaden the width of the front stereo ...
Page 39 - Dynamic EQ; Reference Level; Dynamic Volume; Source Setup
39 En Menu Source Setup Audyssey ■ Audyssey ` Off ` Movie : Select this setting for movie material.The Audyssey indicator will light ( ➔ page 8 ). ` Music : Select this setting for music material.The Audyssey indicator will light ( ➔ page 8 ). Note • When “ Audyssey Quick Start ” has been used for m...
Page 40 - Preset Name For Input Selector; Audio Selector
40 En A/V Sync ■ A/V Sync ` 0 ms to 400 ms in 10 ms steps When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals.To view the TV picture while setting the delay, pr...
Page 41 - OSD Setting; Tuner; Hardware
41 En Setting the Incoming Digital Signal (Fixed Mode) ■ Fixed Mode ` Off : The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead. ` PCM : Only 2-channel PCM format input signals will be heard. If the input signal is not PCM, the ...
Page 42 - HDMI Setup
42 En Menu HDMI Setup ■ HDMI Ctrl (RIHD) ` Off ` On Turn this setting on to allow p -compatible components connected via HDMI to be controlled by the AV receiver ( ➔ page 57 ). Note • When set to “ On ” and close the menu, the name of connected p -compatible components and “ RIHD On ” are displayed ...
Page 43 - Tone Control Settings; Speaker Levels; Using the Audio Settings
43 En ■ LipSync ` Off ` On This function allows the AV receiver to automatically correct any delay between the video and the audio, based on the data from the connected monitor. Note • This function works only if your HDMI-compatible TV supports HDMI Lip Sync. You can change various audio settings f...
Page 44 - Late Night Function; Late Night; Music Optimizer; CinemaFILTER; Cinema Filter
44 En Late Night Function ■ Late Night For Dolby Digital and Dolby Digital Plus sources, the options are: ` Off ` Low : Small reduction in dynamic range. ` High : Large reduction in dynamic range. For Dolby TrueHD sources, the options are: ` Auto : The Late Night function is set to “ On ” or “ Off ”...
Page 45 - Controlling Other Components; iPod/iPhone Playback via Onkyo Dock; RI Dock; With the RI Control; DOCK; Without the RI Control; Using the Onkyo Dock
45 En Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music stored on your Apple iPod/iPhone through the AV receiver and enjoy great sound, and watch iPod/iPhone slideshows and videos on your TV. In addition, the onscreen display (OS...
Page 47 - Controlling Other Onkyo Components; Entering Remote Control Codes; REMOTE MODE; REMOTE MODE
47 En Controlling Other Onkyo Components You can use the AV receiver’s remote controller to control your other Onkyo AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, CD, etc. The following REMOTE MO...
Page 48 - Resetting REMOTE MODE Buttons
48 En You can reset a REMOTE MODE to its default remote control code. You can reset the remote controller to its default settings. By pressing REMOTE MODE that’s been programmed with the remote control code for your component, you can control Onkyo component as below.For details on entering a remote...
Page 50 - Appendix; Troubleshooting; , press and hold down; Power; HOME; Audio
50 En Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The AV receiver turns off unexpectedly ■ When the power is restored after a power i...
Page 51 - Video
51 En ■ Only the front speakers produce sound ■ Only the center speaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The front high or surround back speakers produce no sound ■ The subwoofer produces no sound ■ There’s no sound with a certain signa...
Page 54 - Connection Tips and Video Signal Path; Video Connection Formats
54 En Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Note • The on-screen setup menus ...
Page 55 - USB Features; • USB mass storage device class (but not always; USB Device Requirements
55 En USB Features • USB mass storage device class (but not always guaranteed). • FAT16 or FAT32 file system format.• Each folder may contain up to 255 music files and folders, and folders may be nested up to 8 levels deep. • USB hubs and USB devices with hub functions are not supported. For and pla...
Page 56 - About HDMI; , so TVs and displays with; Supported Audio Formats
56 En About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cabl...
Page 57 - For; About
57 En Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of th...
Page 58 - HDMI IN 1
58 En ■ How to connect and setup 1 Confirm the connecting and setting. 1. Connect the HDMI OUT jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return channel (ARC) functio...
Page 59 - Specifications; Amplifier Section
59 En Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Rated Output Power All channels: (North American)80 watts minimum continuous powe...
Onkyo SKB-770
User Manual
Onkyo HT-R758
User Manual
Onkyo SKF-690
User Manual
Onkyo TX-SR313
User Manual
Onkyo SKW-204
User Manual
Onkyo HT-R591
User Manual
Onkyo HTX-22HDX
User Manual