Onkyo DS-A5 - Manuals

5 For Canadian models Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfe...

7 Con la presente Onkyo Corporation dichiara che questo DS-A5 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Ar šo Onkyo Corporation deklar ē , ka DS-A5 atbilst Direkt ī vas 1999/5/EK b ū tiskaj ā m pras ī b ā m un citiem ar to saist ī ta...

8 Supplied Accessories Make sure you have the following accessories. * A Lithium Coin Battery CR2025 is loaded on the remote control at the factory. * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of...

9 Using the DS-A5 With the Onkyo DS-A5, you can easily play the music stored on your Apple iPod/iPhone/iPad through your Onkyo amp or AV receiver and enjoy great sound, and watch iPod/iPhone/iPad slideshows and videos on your TV. With the supplied remote controller, you can control your iPod/iPhone/...

11 a Remote control sensor Receives control signals from the remote controller. b STATUS LED Lights up/blinks depending on the status of your DS-A5. See page 29 for details. c Dock connector Connects to your iPod/iPhone/iPad. d Wireless antenna This is the antenna for transmitting and receiving wire...

12 f ETHERNET port This is the port for connecting to network. You can connect this to a router or a hub. g AUDIO OUT L/R jacks These are the analog audio output jacks. h VIDEO OUT jack This is the analog video output jack. i u jack This is the jack for linked operation with Onkyo amp or AV receiver...

13 You can use the following buttons to control your iPod/iPhone/iPad. a 8 button Sets the DS-A5 to on or standby. b MENU button Returns to the previous menu. c q / w and ENTER buttons These buttons navigate through the menus. d 7 button Selects the beginning of the current song. Pressing this butto...

15 Point the supplied remote controller toward the DS-A5’s remote control sensor, as shown. . Note • The remote controller may not work reliably if the DS-A5 is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Relocate if necessary. • If another remote controll...

16 The supplied remote controller uses a CR2025 type battery. Always use with the same type. Note • If the remote controller doesn’t work reliably, try replacing the battery. • If you intend not to use the remote controller for a long time, remove the battery to prevent damage from leakage or corros...

19 Follow either of the procedures below to perform your network connection. Wireless connection ■ Using Wi-Fi Network Login Sharing Note • To use this function, iOS version 5 or greater is required on the following devices.– iPod touch (3rd and 4th generation)– iPhone 4S, iPhone 4, iPhone 3GS– iPad...

21 Wireless connection ■ Using Access Point Mode 1 Confirm that LED lights up in green. LED lighting in blue indicates that connection to network has been completed. Note • If Ethernet cable is being connected to the DS-A5, pull the Ethernet cable out after turning the power of DS-A5 off, and turn t...

22 The WEB settings allow you to confirm information of the DS-A5, to change name, to configure network and to update firmware. WEB settings menu can be displayed by the following procedure (example of Safari 5.1). Note • The WEB settings can be made while LED of the DS-A5 lights up in blue. • Above...

23 Follow the procedure below to play back. The DS-A5 goes into standby status automatically, if it is not played back for longer than 20 minutes. When iPod/iPhone/iPad is connected, it goes into charge mode.When connection to network has been completed, DS-A5 goes into Network ready status. Playing...

24 You can use the following systems by connecting the DS-A5 and Onkyo amp or AV receiver equipped with u jack by an u cable and an analog audio cable. ■ System On When you turn on your amp or AV receiver, the DS-A5 turns on automatically. ■ System Off When you turn off your amp or AV receiver, the ...

25 ■ Other Remote Controller Operations You can use the remote controller that came with your amp or AV receiver to control basic iPod/iPhone/iPad functions. The available functionality depends on your amp or AV receiver. See the instruction manual that came with your amp or AV receiver for details....

26 Follow the procedure below to update the firmware of DS-A5. Note • Don’t unplug the cables or turn the power off during the update process. • The program and accompanying online documentation are furnished to you for use at your own risk. Onkyo will not be liable and you will have no remedy for d...

27 You can restore the DS-A5 to default settings.Perform this when the needs to restore the DS-A5’s name, volume value and network settings arise. No Sound or Video • Make sure your iPod/iPhone/iPad is connected properly. • If there’s no video, make sure your iPod/iPhone/iPad supports TV out. • Make...

29 The following table describes the DS-A5’s status. STATUS LED LED color Status Off — Standby Solid Lighting Orange iPod/iPhone/iPad is charging, or Network is ready. Blue (connected to network) Audio and video can be output from the component connected to Dock connector or with AirPlay. Green (not...

30 Specifications and features are subject to change without notice. Specifications Rating: DC 5 V, 3 A Power Consumption: 18 W Standby Power Consumption: 0.5 W (including supplied AC adapter) (Network ready) 4 W (including supplied AC adapter) Network: (Wi-Fi) IEEE 802.11b/g standard (Ethernet) 100...