Page 2 - Important safety instructions; WARNING; AVIS
2 Important safety instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructi...
Page 3 - Precautions
3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care —Occ...
Page 5 - Features; Composed of highly reliable parts; Supplied accessories
5 Features Professional manual record player with a focus on sound quality This is a manual player with simple functions that is designed with the highest priority placed on the sound quality for playing analog records. In terms of operations, usability is ensured with fittings such as a lifter for ...
Page 6 - Names and functions of parts
6 Names and functions of parts POWER button ( ON/ OFF): Press this button to turn the unit on or off. Speed selector button (33/45): Set this button according to the record’s playing speed. Center spindleRubber matTurntableCounterweight: Use this to balance the tone arm and to adjust the stylus pres...
Page 7 - Assembly and installation; Mounting the turntable and rubber mat; Mounting the head shell; Assembly
7 Assembly and installation 1. Mounting the turntable and rubber mat 1. Insert the turntable onto the center spindle. 0 Handle the turntable with care so that it does not drop onto or hit the unit, tone arm, etc. 2. Lay the rubber mat on top. 2. Mounting the head shell Fit the head shell into the to...
Page 8 - Preparatory adjustments; Horizontal balance
8 Preparatory adjustments The horizontal balance of the tone arm needs to be adjusted first in order to ensure that an appropriate stylus pressure is applied on the record. Carry out the adjustment with the power turned off. 1. Set the anti-skating knob to “0”. 2. Remove the translucent stylus cover...
Page 10 - Connections; Connection with the amplifier
10 Connections 1. Connection with the amplifier Connect the supplied pin cables with attached grounding to the PHONO OUTPUT terminals on the rear panel of the unit and the PHONO input terminals of the amplifier. Connect the red plug to the R terminal and the white plug to the L terminal respectively...
Page 11 - Playing records; To stop playing the music
11 Playing records 1. Press the POWER button to turn on the power supply.The indicator of the speed selector button lights up. 2. Put a record on the rubber mat. 0 If it is a record with a large hole, fit the supplied adapter for 45 rpm records into the center spindle. 3. Set the speed selector butt...
Page 12 - Troubleshooting; The unit does not turn on.
12 Troubleshooting The unit does not turn on. 0 Confirm that the power plug is securely plugged in to an outlet. 0 Set the POWER button to the OFF state by pressing it once and then set it to the ON state by pressing it again after waiting for 5 seconds or longer. Stylus does not lower onto record. ...
Page 13 - Handling; Handling and maintenance of stylus
13 Handling Handling and maintenance of stylus Take due care when handling the stylus as the stylus tip is extremely delicate.Remove any dust attached to the stylus tip using a brush with a soft tip by brushing from the base of the stylus towards the end. You can also use a special cleaner available...
Page 14 - Specifications; Turntable section
14 Specifications ∫ Turntable section ∫ Tone arm section ∫ Cartridge section (OC-105) ∫ General Specifications and features are subject to change without notice. Drive method : Direct drive Turning speed: 33 1/3 rpm, 45 rpm Wow and flutter: 0.15 % or less Signal to noise ratio: 60 dB or above Turnta...
