Onkyo CP-1050 - Manuals

6 Names and functions of parts POWER button ( ON/ OFF): Press this button to turn the unit on or off. Speed selector button (33/45): Set this button according to the record’s playing speed. Center spindleRubber matTurntableCounterweight: Use this to balance the tone arm and to adjust the stylus pres...

7 Assembly and installation 1. Mounting the turntable and rubber mat 1. Insert the turntable onto the center spindle. 0 Handle the turntable with care so that it does not drop onto or hit the unit, tone arm, etc. 2. Lay the rubber mat on top. 2. Mounting the head shell Fit the head shell into the to...

8 Preparatory adjustments The horizontal balance of the tone arm needs to be adjusted first in order to ensure that an appropriate stylus pressure is applied on the record. Carry out the adjustment with the power turned off. 1. Set the anti-skating knob to “0”. 2. Remove the translucent stylus cover...

10 Connections 1. Connection with the amplifier Connect the supplied pin cables with attached grounding to the PHONO OUTPUT terminals on the rear panel of the unit and the PHONO input terminals of the amplifier. Connect the red plug to the R terminal and the white plug to the L terminal respectively...

11 Playing records 1. Press the POWER button to turn on the power supply.The indicator of the speed selector button lights up. 2. Put a record on the rubber mat. 0 If it is a record with a large hole, fit the supplied adapter for 45 rpm records into the center spindle. 3. Set the speed selector butt...

12 Troubleshooting The unit does not turn on. 0 Confirm that the power plug is securely plugged in to an outlet. 0 Set the POWER button to the OFF state by pressing it once and then set it to the ON state by pressing it again after waiting for 5 seconds or longer. Stylus does not lower onto record. ...

13 Handling Handling and maintenance of stylus Take due care when handling the stylus as the stylus tip is extremely delicate.Remove any dust attached to the stylus tip using a brush with a soft tip by brushing from the base of the stylus towards the end. You can also use a special cleaner available...

14 Specifications ∫ Turntable section ∫ Tone arm section ∫ Cartridge section (OC-105) ∫ General Specifications and features are subject to change without notice. Drive method : Direct drive Turning speed: 33 1/3 rpm, 45 rpm Wow and flutter: 0.15 % or less Signal to noise ratio: 60 dB or above Turnta...