Onkyo C-7030 - Manuals

En- 5 Supplied Accessories Make sure you have the following accessories • To use  , the CD Player must be connected with a  cable. * In catalogs and on packaging, the letter at the end of the prod- uct name indicates the color. Specifications and operations are the same regardless of color. Featu...

En- 6 Contents Important Safety Instructions ........................... 2 Precautions......................................................... 3 Supplied Accessories ........................................ 5 Features .............................................................. 5 Getting to Know ...

En- 7 Getting to Know the CD Player a  ON/STANDBY button (15) Press to turn on or standby the C-7030. b Disc tray (16) The CD is loaded here. c Open/Close [  ] button (16) Press to open and close the disc tray. d Pause [  ] button (16, 17) Press to pause playback. e Stop [  ] button (16 – 19, 24...

En- 8 Getting to Know the CD Player —Continued a  /  indicators The  indicator lights up for playback. The  indicator lights up while playback is paused. b MP3, WMA indicators Lights up when an MP3 or WMA CD is loaded. c FOLDER indicator Lights up when folder playback is selected. d FILE indicat...

En- 9 Getting to Know the CD Player —Continued The page numbers in parentheses show where you can find the main explanation for each item. a [  ] button (15) Press to turn on or standby the C-7030. b DIMMER button (15) Press to adjust the display brightness. c Pause [  ] button (16, 17) Press to p...

En- 10 Getting to Know the CD Player —Continued 1 To open the battery compartment, press the small hollow and slide open the cover. 2 Insert two batteries (R03/AAA) into the compartment. Carefully follow the polarity diagram (positive (+) and negative (–) symbols) inside the battery compartment. Bat...

En- 11 Disc Notes Precautions for Playback Compact discs (CDs) with the following logo on the label surface can be used.Do not use discs designed for purposes other than audio, such as CD-ROMs for PC use. Abnormal noise could damage the speakers or amplifier. * This CD player supports CD-R and CD-RW...

En- 12 Disc Notes —Continued Precautions for Rental Discs Do not use discs with residue from cellophane tape, rental discs with labels which are peeling off, or discs with decorative labels. This type of disc could get stuckin the CD player, or could damage the CD player. Precautions for Inkjet Prin...

En- 13 Connecting the CD Player • Before making any connections, read the manuals supplied with your other components. • Don’t connect the power cord until you’ve completed and double-checked all connections. Connection Color Coding RCA-type audio connections are usually color-coded: red and white. ...

En- 14 Connecting the CD Player —Continued With  (Remote Interactive) you can control the C-7030 together with your other  -compatible Onkyo AV components. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components and use the following special  functions:...

En- 15 Connecting the Power Cord  Before connecting the power cord, connect all of the other components. Basic Operation To turn on the CD Player, press the [  ON/STANDBY] button on the unit or the remote controller. Press the [  ON/STANDBY] button again to set the CD Player to Standby. You can s...

En- 16 Disc Playback 1 Press the Open/Close [  ] button to open the disc tray. 2 Place the CD on the tray with the label-side facing up. If you're playing an 8 cm CD, place it in the center of the tray. 3 To start playback, press the Play [  ] button. The disc tray closes and playback starts. The ...

En- 17 Disc Playback —Continued Press the CD Player’s or the remote controller’s [DISPLAY] button (repeatedly) to show the following CD information. While Playback is Stopped During Playback or While Playback is Paused See page 20 for details on displaying MP3/WMA information. Using the Remote Contr...

En- 18 Disc Playback —Continued For MP3/WMA CDs, files (MP3/WMA files) may be organized in a hierarchy, with folders containing files and subfolders, as shown below. • In this manual, MP3/WMA files are referred to as files. Likewise, folders (directories) are referred to as folders. If you don’t sel...

En- 19 Disc Playback —Continued 6 Press the [ENTER] or [  ] button. Playback will start with the specified file or folder and continue until all of the files on the disc have been played. To cancel the procedure at any point, press the [  ] on the remote controller. Note: • The behavior of the [ ...

En- 20 Disc Playback —Continued 2 To select the previous folder, press the Previous [  ] button. To select the next folder, press the Next [  ] button. 3 Press the [ENTER] button to display the file name, and start playback the selected file. 4 Use the Previous [  ] and Next [  ] buttons to sele...

En- 21 Various Playback Modes You can select the following playback modes: • Random playback• Memory playback• Repeat playback With random playback, all of the files on the disc are played in random order. 1 While playback is stopped, press the [RAN-DOM] button; the RANDOM indicator appears. 2 To st...

En- 22 Various Playback Modes —Continued 2 Use the Previous and Next [  ]/[  ] buttons to select the first file you want to add to the playlist, and then press [ENTER] button. Repeat this step to add additional files to the playlist.Alternatively, you can use the number buttons on the remote contr...

En- 23 Various Playback Modes —Continued 6 Use the [  ]/[  ]/[  ] buttons to continue selecting other items for memory playback. To move up a level, press the [  ] button. To continue selecting items for memory playback, repeat steps 4 and 5.To memorize other items of the same folder in the play...

En- 24 Setting for MP3/WMA The MP3/WMA preferences let you change the way MP3/WMA file information is displayed and the way MP3/WMA CDs are played. The MP3/WMA preferences can be set only when playback is stopped. 1 Press the [SETUP] button. 2 Use the [  ]/[  ] buttons to select the preference you...

En- 25 Setting for MP3/WMA —Continued ❏ STOP KEY ( All Folder /Navigation/ Disable ) This preference determines how the Stop [  ] button on the CD Player works. When the ALL Folder option is selected, pressing the Stop[  ] button once selects All Folder mode. When the Navigation option is selected...

En- 26 Troubleshooting If you have any trouble using the CD Player, look for a solution in this section. Can’t turn on the C-7030. • Make sure that the power cord is properly plugged into the wall outlet (page 15).• Unplug the power cord from the wall outlet, wait five seconds or more, then plug it ...

En- 27 Troubleshooting —Continued • You’re not pointing the remote controller at the C-7030’s remote sensor. Point the remote controller at the C-7030’s remote sensor (page 10). • You’re too far away from the C-7030. Move the remote controller closer to the C-7030 (page 10). The remote con- troller ...