Onkyo AV Receiver TX-NR818- Manuals

Safety Information and Introduction En-5 Supplied Accessories Make sure you have the following accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color. ■ Installing the batteries Note •...

Safety Information and Introduction En-6 Table of Contents Safety Information and Introduction Important Safety Instructions ......................................2Precautions ...................................................................3Supplied Accessories.......................................

Safety Information and Introduction En-7 Features Amplifier • 135 Watts/Channel @ 8 ohms (FTC)• 180 Watts/Channel @ 6 ohms (IEC)• 230 Watts/Channel @ 6 ohms (JEITA)• WRAT–Wide Range Amplifier Technology (5 Hz to 100 kHz bandwidth) • Linear Optimum Gain Volume Circuitry• H.C.P.S. (High Current Power ...

Safety Information and Introduction En-8 Front & Rear Panels Front Panel (North American models) (European, Australian and Asian models) d e c f g h b a  i j l m o p t q s n u w x y v k r z

Safety Information and Introduction En-10 s For detailed information, see the pages in parentheses. a Speaker/channel indicators b Z2 (Zone 2) indicator ( 79 ) c Z3 (Zone 3) indicator ( 79 ) d Listening mode and format indicators ( 40 ) e M.Opt indicator ( 53 ) f 1 , 3 and cursor indicators ( 28 ) g...

Safety Information and Introduction En-11 a u  REMOTE CONTROL jack b USB port c ETHERNET port d RS232 port Terminal for control. e Composite video and analog audio jacks ( BD/DVD IN , CBL/SAT IN , STB/DVR IN , GAME 1 IN , PC IN , TV/CD IN and PHONO IN ) f HDMI IN and HDMI output ( HDMI OUT MAIN and ...

Safety Information and Introduction En-12 Remote Controller For detailed information, see the pages in parentheses. a 8 RECEIVER button ( 23 ) b ACTIVITIES buttons ( 50 ) c REMOTE MODE/INPUT SELECTOR buttons ( 26 ) d SP (speaker layout) button ( 49 ) e q / w / e / r and ENTER buttons f Q SETUP butto...

En-13 Connections Connecting the AV Receiver Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.To get the best...

Connections En-14 ■ 7.1-channel playback Select the speakers (surround back, front high, front wide) you want to use for 7.1-channel playback.You can set which speakers you want to use by priority. See “Selecting Speaker Layout” ( ➔ page 49 ). Surround back left Surround left Surround right Front hi...

Connections En-15 Attaching the Speaker Cable Labels The speaker terminals are color-coded for identification purpose. The supplied speaker cable labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the table above. Then all you nee...

Connections En-16 Using Dipole Speakers You can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in two directions.Dipole speakers typically have an arrow printed on them to indicate how they should be positioned. The surround dipole speakers (a)...

Connections En-17 Connecting a Power Amplifier If you want to use a more powerful power amplifier, you can use the AV receiver as a preamp. Connect all speaker outputs to the power amplifier. See the manuals supplied with your amplifier for details. SB ···Surround Back, FH ···Front High, FW ···Front...

Connections En-18 Connecting AV components a *1 If your TV doesn’t support Audio Return Channel (ARC), you need to connect an optical digital cable together with the HDMI cable to the AV receiver. • Before making any AV connections, read the manuals supplied with your AV components. • Don’t connect ...

Connections En-19 * If your TV doesn’t support Audio Return Channel (ARC), you need to connect an optical digital cable together with the HDMI cable to the AV receiver. * When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV scree...

Connections En-20 Connecting Your Components The on-screen menus appear only on a TV that is connected to HDMI OUT MAIN . If your TV is connected to other video outputs, use the AV receiver’s display when changing settings. C  B  A  D  A  E  F  G  H  Front Rear GND screw Connect your components to t...

Connections En-21 Note *1 Do not connect the AV receiver’s USB port to a USB port on your computer. Music on your computer cannot be played through the AV receiver in this way. *2 Only the front-panel USB input is compatible with iPod/iPhone. *3 When the USB input is selected, you can input video si...

Connections En-22 This section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Note • Once your AV receiver is ready for use, you’ll need to tun...

En-23 Turning On & Basic Operations Turning On/Off the AV Receiver Tip • The HYBRID STANDBY indicator may light depending on the status of settings ( ➔ page 56 ). • For details on power management settings, see “Auto Standby” ( ➔ page 76 ). 8 RECEIVER RECEIVER 8 ON/STANDBY Turning On 1 Press 8 O...

Turning On & Basic Operations En-24 Initial Setup This section explains the settings that we recommend you to make before using the AV receiver for the very first time. A setup wizard is launched upon first-time use to let you perform those settings. This step determines the language used for th...

Turning On & Basic Operations En-25 This step checks the connection of source components. With this step, you can enter remote control codes for the components you want to operate. This step checks your network connection. This step ends the initial setup process. Source Connection 1 Use q / w t...

Turning On & Basic Operations En-26 Playback ■ Operating with the remote controller ■ Operating on the AV receiver The on-screen information appears only on a TV that is connected to HDMI outputs. If your TV is connected to other video outputs, use the AV receiver’s display when changing setting...

Turning On & Basic Operations En-27 Tip • See “Controlling Other Components” about the operation of other components ( ➔ page 84 ). Note • The buttons you can use will differ depending on the devices and media used for playback. Controlling Contents of USB or Network Devices e k j m b a d f g c ...

Turning On & Basic Operations En-28 This section describes icons that appear on the AV receiver’s display during media playback. This section explains how to play music/video files on the iPod/iPhone.Compatible iPod/iPhone modelsMade for:iPod touch (1st, 2nd, 3rd and 4th generation), iPod classi...

Turning On & Basic Operations En-29 Extended Mode (Music) Control The music content information is displayed (lists are displayed), and you can control the music content while looking at the screen.Top screen list:Playlists, Artists, Albums, Genres, Songs, Composers, Shuffle Songs, Now Playing. ...

Turning On & Basic Operations En-30 Internet radio URLs in the following formats are supported: PLS, M3U, and podcast (RSS). However, depending on the type of data or audio format used by the Internet radio station, you may not be able to listen to some stations.To listen to other Internet radio...

Turning On & Basic Operations En-31 The layout of icons can be customized by switching their positions on the network service screen. This section explains how to play music files on a computer or media server through the AV receiver (Server Playback). Windows Media Player 11 Setup This section ...

Turning On & Basic Operations En-32 Remote Playback means you can play the music files stored on a media server or personal computer with the AV receiver by operating the controller device in the home network. Windows Media Player 12 Setup This section explains how to configure Windows Media Pla...

Turning On & Basic Operations En-33 This section explains how to play music files on a computer or NAS (Network Attached Storage) through the AV receiver. Windows 7 Setup ■ Setting the sharing options ■ Creating a shared folder Playing music files on a shared folder In order to enjoy Home Media,...

Turning On & Basic Operations En-34 Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection.You can also change the frequency steps ( ➔ page 74 ). Tuning into Radio Stations ■ Auto tuning mode ■ Manual tu...

Turning On & Basic Operations En-36 ■ Listening to Traffic News (TP) You can search for stations that broadcast traffic news. RDS program types (PTY) You can listen to the audio of one input source while watching the video of another. This function takes advantage of the fact that when an audio-...

Turning On & Basic Operations En-37 Using Basic Functions With the supplied calibrated microphone, Audyssey MultEQ ® XT32 automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distan...

Turning On & Basic Operations En-38 1 Turn on the AV receiver and the connected TV. On the TV, select the input to which the AV receiver is connected. 2 Set the speaker setup microphone at the Main Listening Position a , and connect it to the SETUP MIC jack. The speaker setting menu appears. Not...

Turning On & Basic Operations En-39 Note • You can cancel Audyssey MultEQ XT32 Room Correction and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone. • Do not connect or disconnect any speakers during Audyssey MultEQ XT32 Room Correction and Speaker Setup....

Turning On & Basic Operations En-40 Selecting Listening Modes See “About Listening Modes” for detailed information about the listening modes. ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC button This button selects the...

Turning On & Basic Operations En-41 Input Source The following audio formats are supported by the listening modes. Speaker Layout The illustration shows which speakers are activated in each channel. See “Speaker Configuration” for the speaker setup ( ➔ page 60 ). *1 Press RECEIVER followed by SP...

Turning On & Basic Operations En-42 ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Source Speaker Layout Orchestra Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberati...

Turning On & Basic Operations En-43 ■ Listening Modes Listening Mode Description Input Source Speaker Layout Pure Audio *1 In this mode, the display and video circuitry are turned off, minimizing possible noise sources for the ultimate in high-fidelity audio reproduction. (As the analog video ci...

Turning On & Basic Operations En-45 • Dolby Pro Logic II/IIx *7 Movie + Audyssey DSX • Dolby Pro Logic II/IIx *7 Music + Audyssey DSX • Dolby Pro Logic II/IIx *7 Game + Audyssey DSX The combination of Dolby Pro Logic II/IIx and Audyssey DSX ® modes can be used. S B bM • Dolby Pro Logic IIx Movie...

Turning On & Basic Operations En-47 The Home menu provides quick access to frequently used menus. ■ Network Service ` With this selection, you can use various Internet radio services or play the contents stored in media connected to your home network (DLNA) ( ➔ pages 29 to 32 ) . Note that this ...

Turning On & Basic Operations En-48 With the sleep timer, you can set the AV receiver to turn off automatically after a specified period. You can adjust the brightness of the AV receiver’s display, and switch the MASTER VOLUME indicator off and on in conjunction. You can display various informat...

Turning On & Basic Operations En-49 The Whole House Mode is useful when you want to add extra background music to your home party; this allows you to enjoy the same stereo music as the main room in separate rooms (Zone 2/3).The Whole House Mode selects the same input source for Multi Zone as the...

Turning On & Basic Operations En-50 By using ACTIVITIES in Easy macro mode, you can sequentially operate Onkyo components via simple commands from a single-button press.These commands are user-definable. See “Using Normal Macros” ( ➔ page 90 ). ■ MY MOVIE First, the TV, the Onkyo DVD player, and...

En-51 Advanced Operations On-screen Setup With the AV receiver connected to a TV, there are two ways of changing the settings on-screen: using the Quick Setup or the Setup menu ( HOME ). ■ Quick Setup The Quick Setup provides quick access to frequently used settings. You can change settings and view...

Advanced Operations En-52 Note *1 • The video preview is not displayed when: – HDMI IN 5 / 6 / 7 is the current HDMI input source, or – No signal is present on the current input source. • The video of the currently-selected input is displayed on the main screen, not on a preview thumbnail. *2 “ Dolb...

Advanced Operations En-53 Dolby Volume ■ Dolby Volume See “Dolby Volume” of “Audio Adjust” ( ➔ page 65 ). Note • This setting cannot be used in either of the following cases: – The Pure Audio or Direct listening mode is selected.– Any of the THX listening modes is selected, with “ Loudness Plus ” se...

Advanced Operations En-54 Re-EQ With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing. ■ Re-EQ ` Off ` On This function can be used with the following listening modes: Dolby Digital, Dolby Digital Plus, Do...

Advanced Operations En-55 Note • This procedure can also be performed on the AV receiver by using SETUP , the cursor and enter (middle) buttons. • During Audyssey MultEQ ® XT32 Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s dis...

Advanced Operations En-56 By way of optimized circuitry, this function reduces power consumption when the AV receiver is in standby mode. The HYBRID STANDBY indicator will light in either of the following conditions: – “ HDMI Through ” is enabled (the HDMI indicator is off). – “ Network Standby ” is...

Advanced Operations En-57 Main Menu Input/Output Assign Monitor Out On the “ Monitor Out ” settings, you can select whether or not to have the video sources’ images output through the HDMI output.If you connect your TV to the HDMI output, the “ Monitor Out ” setting is automatically set and composit...

Advanced Operations En-58 HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.If you’ve connected your TV to t...

Advanced Operations En-59 Digital Audio Input If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1 , you must assign “ OPTICAL1 ” to the “ TV/CD ” input selector. Here are the default assi...

Advanced Operations En-61 ■ Double Bass ` On ` Off(THX) Turn this setting on to boost bass output by feeding bass sounds from the front left, right, and center channels to the subwoofer. Note • When the “ Subwoofer ” setting is set to “ No ” or the “ Front ” setting to anything other than “ Full Ban...

Advanced Operations En-62 Equalizer Settings With the Equalizer settings, you can adjust the tone of speakers individually with a 7-band equalizer. The volume of each speaker can be set ( ➔ page 61 ). ■ Manual Equalizer ` On : You can adjust the equalizer for each speaker manually. Continue with the...

Advanced Operations En-63 Digital Processing Crossover Network Digital Crossover provides a separate routing system by splitting the audio signal into separate frequency bands optimized for each speaker driver. It provides a fine, three-dimensional sound field that extend each driver’s performance t...

Advanced Operations En-64 ■ High Distance, Low Distance ` 0inch(0.0cm) to 12inch(30.0cm) in 1 inch(2.5 cm) steps With this setting, you can adjust the virtual position of tweeter and woofer units. Adjusting “ High Distance ” virtually shifts woofers behind tweeters. Adjusting “ Low Distance ” virtua...

Advanced Operations En-66 DTS ■ Neo:X Music Center Image ` 0 to 2 to 5 The DTS Neo:X Music listening mode creates 9-channel surround sound from 2-channel stereo sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center...

Advanced Operations En-67 The “ Straight Decode ” option means that straight decoding listening mode (Dolby Digital, DTS, etc.) is selected. ■ Subwoofer ` No , Yes You can choose whether or not to use the subwoofer with the sound program. ■ Music Optimizer *1 ` Off , On See “Music Optimizer” ( ➔ pag...

Advanced Operations En-68 Movies are mixed in rooms calibrated for film reference. To achieve the same reference level in a home theater system each speaker level must be adjusted so that –30 dBFS band-limited (500 Hz to 2000 Hz) pink noise produces 75 dB sound pressure level at the listening positi...

Advanced Operations En-69 Name Edit You can enter a custom name for each individual input selector and radio preset for easy identification. When entered, the custom name will appear on the display.The custom name is edited using the keyboard screen. ■ Name Tip • To name a radio preset, use TUNER to...

Advanced Operations En-72 Audio Selector ■ Audio Selector ` ARC : The audio signal from your TV tuner can be sent to HDMI OUT MAIN of the AV receiver. *1 With this selection, the TV’s audio can be automatically selected as a priority among other assignments. ` HDMI : This can be selected when HDMI I...

Advanced Operations En-73 ■ Analog/PCM/Digital With this setting, you can specify the listening mode used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc.) or PCM digital (CD, DVD, etc.) audio signal is played. Note • For the “ GAME2 ” input selector, only “ PC...

Advanced Operations En-74 ■ Power On Volume ` Last , Min , 1 to 99 or Max (Absolute display) ` Last , – Q dB , –81dB to +18dB (Relative display) With this preference, you can specify the volume setting to be used each time the AV receiver is turned on.To use the same volume level that was used when ...

Advanced Operations En-75 HDMI ■ HDMI Control(RIHD) ` Off ` On Turn this setting on to allow p -compatible components connected via HDMI to be controlled by the AV receiver ( ➔ page 104 ). Note • When the setting is set to “ On ” and the menu is closed, the names of connected p -compatible component...

Advanced Operations En-76 ■ Audio Return Channel (ARC) ` Off ` Auto : The audio signal from your TV tuner can be sent to HDMI OUT MAIN of the AV receiver. The audio return channel (ARC) function allows an ARC capable TV to send the audio stream to HDMI OUT MAIN of the AV receiver. To use this functi...

Advanced Operations En-77 ■ DHCP ` Enable ` Disable This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings. Note • If you select “ Disable ”, you must configure the “ IP Address ”, “ Subnet Mask ”, “ G...

Advanced Operations En-78 Multi Zone In addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. There are two ways you can connect Zone speakers:1. Connect them directly to the AV receiver.2. ...

Advanced Operations En-79 Connecting the Zone Speakers to an Additional Amplifier This setup allows 7.1-channel playback in your main listening room and 2-channel stereo playback in Zone 2/3. Note • The volume of Zone 2/3 must be set on the Zone 2/3 amplifier. ■ Operating on the AV receiver Tip • Th...

Advanced Operations En-80 Adjusting the Volume for Zones ■ Operating on the remote controller ■ Operating on the AV receiver If your Zone 2/3 speakers are connected to a receiver or integrated amplifier in Zone 2/3, use its volume control to adjust the volume. Muting Zones ■ Operating on the remote ...

Advanced Operations En-81 To control the AV receiver with the remote controller while you’re in Zone, you’ll need a commercially available multiroom remote control kit for each zone.• Multiroom kits are made by Niles and Xantech.These kits can also be used when there isn’t a clear line of sight to t...

En-82 Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music of your iPod/iPhone, or watch the slideshows and videos of your iPod/iPhone on a TV. In addition, the on-screen display (OSD) allows you to view, navigate, and select your i...

Controlling Other Components En-83 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described further in this section.See “Entering Remote Control Codes” for details on entering a remot...

Controlling Other Components En-84 Controlling Other Components You can use the AV receiver’s remote controller to control your other AV components. This section explains how to enter the remote control code for a component that you want to control: DVD, TV, CD, etc.See “Learning Commands” for learn...

Controlling Other Components En-85 You’ll need to enter a code for each component that you want to control. Note • Though the provided remote control codes are correct at the time of release, they are subject to change. You can change the configuration of colored buttons, with which REMOTE MODE butt...

Controlling Other Components En-86 Onkyo components that are connected via u are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example. Controlling Onkyo components without u If you want ...

Controlling Other Components En-87 Controlling MHL-Enabled Mobile Device By programming the supplied remote controller with the appropriate remote control code, you can use it to operate your MHL-enabled mobile device.Connect your MHL-enabled mobile device to the AUX INPUT MHL jack. We advise you to...

Controlling Other Components En-88 ■ DVD player/DVD recorder operation ■ VCR/PVR operation ■ Cassette tape deck operation ■ Satellite receiver/Cable receiver operation ■ CD player/CD recorder/MD recorder operation Note • With some components, certain buttons may not work as expected, and some may no...

Controlling Other Components En-89 The AV receiver’s remote controller can learn the commands of other remote controllers. By transmitting, for example, the Play command from your CD player’s remote controller, the supplied remote controller can learn it and then reproduce the exact same command whe...

Controlling Other Components En-90 You can program the remote controller’s ACTIVITIES to perform a sequence of remote control actions. Example: To play a CD you typically need to perform the following actions:1. Press RECEIVER to select the Receiver remote controller mode. 2. Press 8 RECEIVER to tur...

En-91 Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer. ■ Can’t turn on the AV receiver ■ The AV receiver turns off unexpectedly ■ The AV receiver turns off and after restor...

Appendix En-93 ■ About DTS signals ■ The beginning of audio received by an HDMI IN can’t be heard ■ There’s no sound during Whole House Mode ■ There’s no picture ■ There’s no picture from a source connected to an HDMI IN ■ The on-screen menus don’t appear ■ The on-screen information does not appear ...

Appendix En-94 ■ Can’t control other components ■ Can’t learn commands from another remote controller ■ There’s no sound ■ There’s no video ■ The AV receiver’s remote controller doesn’t control my iPod/iPhone ■ The AV receiver unexpectedly selects my iPod/iPhone as the input source ■ iPod/iPhone doe...

Appendix En-95 ■ Can’t connect to the AV receiver from a Web browser ■ Can’t access the music files on a USB device ■ Standby power consumption ■ The sound changes when I connect my headphones ■ The speaker distance cannot be set as required ■ The display doesn’t work ■ How do I change the language ...

Appendix En-96 ■ If the picture on your TV/monitor connected to the HDMI output is unstable, try switching the DeepColor function off To turn off the DeepColor function, simultaneously press the STB/DVR and 8 ON/STANDBY buttons on the AV receiver. While holding down STB/DVR , press 8 ON/STANDBY unti...

Appendix En-97 Firmware Update To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your environment. Before proceeding with the update, please read the corresponding explanations caref...

Appendix En-98 Update Procedure Troubleshooting Case 1: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display. (Alpha-numeric characters on the front display are denoted by asterisks.) Refer to the following table and take appropriate action. ■ Errors during an update via ne...

Appendix En-99 The AV receiver allows you to update the firmware using a USB device. Note • Never unplug or turn off the AV receiver during the update process. • Never plug or unplug an HDMI cable or a USB device during the update process. • Never unplug the USB storage device containing the firmwar...

Appendix En-100 Troubleshooting Case 1: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display. (Alpha-numeric characters on the front display are denoted by asterisks.) Refer to the following table and take appropriate action. ■ Errors during an update via USB Case 2: If an ...

Appendix En-101 Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. Video components can be...

Appendix En-102 ■ Signal Selection If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, component video, composite video.However, for component video only, regardless of whether a component video signal is actually present...

Appendix En-103 The following tables show how video signals at different resolutions are output by the AV receiver. NTSC/PAL ✔ : Output available s *1 Available resolutions: [640 × 480 60 Hz], [800 × 600 60 Hz], [1024 × 768 60 Hz], [1280 × 1024 60 Hz] *2 Supported resolutions: [3840 × 2160 24/25/30 ...

Appendix En-104 Using an RIHD-compatible TV, Player, or Recorder p , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is ...

Appendix En-105 ■ How to connect and setup 1 Confirm the connection and settings. 1. Connect the HDMI OUT MAIN jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable. Note • When the audio return chann...

Appendix En-106 About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and ...

Appendix En-107 Network/USB Features The following diagram shows how you can connect the AV receiver to your home network. In this example, it’s connected to a LAN port on a router, which has a 4-port 100Base-TX switch built-in. ■ Ethernet Network For the best results, a 100Base-TX switched Ethernet...

Appendix En-108 ■ Server playback The AV receiver can play digital music files stored on a computer or media server and supports the following technologies:• Windows Media Player 11 • Windows Media Player 12• Windows Media Connect 2.0• DLNA-certified media serverIf the operating system of your compu...

Appendix En-109 For server playback and playback from a USB device, the AV receiver supports the following music file formats.Variable bit-rate (VBR) files are supported. However, playback times may not display correctly. Note • With remote playback, the AV receiver does not support the following mu...

Appendix En-110 License and Trademark Information “x.v.Color” is a trademark of Sony Corporation. Manufactured under license under U.S. Patent No's: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,333,929, 7,548,853 & other U.S. and...

Appendix En-111 Specifications Amplifier Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and features are subject to change without notice. Rated Output Power All channels: (North American)135 watts minimum cont...

Using Internet Radio En-1 Using Internet Radio Note • Available services may vary depending on the region. Common Procedures in Internet Radio Menu 1 Press NET . A list of the network services appears, and the NET indicator lights. If it flashes, verify that the Ethernet cable is firmly connected to...

Using Internet Radio En-5 Last.fm is a music service that learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.fm account, it will keep track of all the songs you’ve just played. When you visit the Last.fm website, you can see personal charts of the music you’ve...

Using Internet Radio En-6 Using Slacker Personal Radio 1 If you do not have an account, create one on the Slacker website (www.slacker.com) with your computer. If you already have a Slacker account, select “Sign in to your account” and then press ENTER . The keyboard screen appears. You can enter in...

Using Internet Radio En-7 Listen to your music collection on your home stereo in complete digital fidelity without a personal computer plus safely backup all your songs. Here’s how: Creating an Account on your Computer Playing Contents on the AV Receiver Tip • Before proceeding, you need to select t...

Utilisation d’une webradio Fr-1 Utilisation d’une webradio Remarque • Les services disponibles peuvent varier en fonction de la région. Procédures courantes dans le menu de webradio 1 Appuyez sur NET . Une liste des services réseau s’affiche, et le témoin NET s’allume. S’il clignote, vérifiez que le...

Utilisation d’une webradio Fr-5 Last.fm un service de musique qui apprend ce que vous aimez… Votre nouvel ampli-tuner AV Onkyo est très intelligent. Si vous avez un compte Last.fm gratuit, il garde une trace de toutes les chansons que vous avez juste jouées. Quand vous vous rendez sur le site Web de...

Utilisation d’une webradio Fr-6 Utilisation de Slacker Personal Radio 1 Si vous ne possédez pas de compte, créez-en un à partir du site Web de Slacker (www.slacker.com) à l’aide de votre ordinateur. Si vous possédez déjà un compte Slacker, sélectionnez « Sign in to your account », puis appuyez sur E...

Uso de Internet Radio Es-1 Uso de Internet Radio Nota • Los servicios disponibles pueden variar de una región a otra. Procedimientos comunes en el menú Internet Radio 1 Pulse NET . Aparecerá una lista de los servicios de red y se iluminará el indicador NET . Si parpadea, verifique que el cable Ether...

Uso de Internet Radio Es-2 Pandora es un servicio de radio por Internet gratuito y personalizado que reproduce la música que usted conoce y le ayudará a descubrir música que le encantará. PANDORA, el logotipo de PANDORA logo, y la imagen corporativa de Pandora son marcas comerciales o marcas comerci...

Uso de Internet Radio Es-5 Last.fm es un servicio musical que sabe lo que le gusta... Su nuevo receptor de AV Onkyo es muy inteligente. Si tiene una cuenta gratuita de Last.fm, hará un seguimiento de todas las canciones que acaba de escuchar. Cuando visite el sitio web de Last.fm, podrá ver listas p...

Uso de Internet Radio Es-6 Uso de Slacker Personal Radio 1 Si no tiene una cuenta, cree una en el sitio web de Slacker (www.slacker.com) con su ordenador. Si ya tiene una cuenta de Slacker, seleccione “Sign in to your account” y pulse ENTER . Aparecerá la pantalla de teclado. Puede introducir inform...

Internetradio verwenden De-1 Internetradio verwenden Anmerkung • Die verfügbaren Dienste sind länderabhängig verschieden. Allgemeine Verfahren bei den Internetradio-Menüs 1 Drücken Sie NET . Es erscheint eine Liste der Netzwerkdienste und die NET -Anzeige leuchtet. Wenn sie blinkt, überprüfen Sie ob...

Internetradio verwenden Last.fm ist ein Musikdienst, der sich Ihre Lieblingsmusik merkt... Ihr neuer Onkyo AV-Receiver ist äußerst clever. Wenn Sie ein kostenloses Last.fm-Konto eingerichtet haben, werden darin alle kürzlich abgespielten Titel gespeichert. Wenn Sie die Last.fm-Website besuchen, könn...

Remote Control Codes 1 Remote Control Codes / 1 While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/Remote indicator lights.On Integra products, button names are capitalized. For example, “Remote Mode” ...

Remote Control Codes 2 Codes de télécommande Códigos de control remoto 1 Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez associer un code, pressez et maintenez enfoncé le bouton [DISPLAY] (pendant environ 3 secondes). Le bouton REMOTE MODE/le témoin Remote s’allume.Les noms de...

Remote Control Codes 3 Codici del telecomando Fernbedienungscodes 1 Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi). Il tasto REMOTE MODE/l'indicatore Remote si accende.Sui prodotti Integra, i nomi dei tasti sono...

Remote Control Codes 4 Afstandsbedieningscodes Fjärrstyrningskoder 1 Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code wilt toewijzen de [DISPLAY] toets ingedrukt (ongeveer 3 seconden). De toets REMOTE MODE (afstandsbedieningsmodus) / Het indicatielampje afstandsbediening gaat ...

Remote Control Codes 5 遙控代碼 遥控代码 1 在按住想指定編碼的 REMOTE MODE （遙控模式）按鈕時，同時按住 [DISPLAY] （顯示）（約 3 秒）。 REMOTE MODE （遙控模式）按鈕 / 遙控指示燈亮起。在 Integra 系列產品上，按鈕名稱為大寫。 例如，「Remote Mode」（遙控模式）按鈕和 「Display」（顯示）按鈕。 注意： • [RECEIER] （接收機）和多區域按鈕不能輸入遙控編碼。 • 您只能為 [TV] （電視）輸入電視遙控編碼。 • 除 [RECEIVER] （接收機）、[TV] （電視）和多區域按鈕外，您可針對 ...

Remote Control Codes 6 Dedicated Onkyo Receiver Default 62503 Zone 2 62506 Zone 3 62507 Cable Set Top Box ADB 02254, 02769 Aon 02769 Arris 02187 AT&T 00858 Bright House 01376, 01877 BT Vision 02294 Cable & Wireless 01068 Cable One 01376, 01877 Cablecom 01582 Cablevision 01376, 01877 Charter ...

Remote Control Codes 9 Hama 01567 Hanseatic 01100 Hirschmann 00173 Hitachi 01284 Hornet 01300 HTS 00775 Humax 01377, 01176, 01427, 01675, 01808, 01882, 01915, 02144, 02408, 02616 ID Digital 01176 ID Sat 01334 ILLUSION sat 01631 Imperial 01195, 01334 Indovision 00887 iNETBOX 01237 Inno Hit 01626 Inno...

Remote Control Codes 11 Akai 10178, 10556, 10037, 10714, 10715, 10208, 11675 Akiba 10037 Akito 10037 Akura 10171, 10037, 10714, 10668, 11037, 11363, 11585, 11667, 11709 Alba 10037, 10714, 10668, 11037, 11585 Alien 11037 Allstar 10037 Amstrad 10171, 10037, 11037 Anam 10037 Anam National 10037, 10650 ...

Remote Control Codes 16 Technics 10556 Thomson 10625 DVD 3D LAB 30539 Accurian 30675 Acoustic Solutions 30713 AEG 30675 AFK 31152 Aiwa 30533 Akai 30675 Alba 30539, 30713 Ambiance 33052 Amstrad 30713 Anthem 32820 Aristona 30539, 30646 ASDA 32213 Audix 30713 Autovox 30713 Awa 32587 Basic Line 30713 Be...