Page 2 - CONTENTS; Notice
CONTENTS 1 Notice 2 Features 3 Installation 4 Notice of installation 5 Safety Warning 6 Use Instructions 7 Maintenance 8 Troubleshooting 9 Specification It is important that you retain these instructions, proof of purchase as well as other important documents about this product for future reference....
Page 6 - The bending of the ventilation ducting should be
4 (4) NOTICE OF INSTALLATION 1. Before installation, please ensure the area is clean, to avoid suction of the remaining bits of broken wood and dust. 2. The canopy hood cannot share the same air ventilation ducting as other appliances, such as gas and electric heaters. 3. The bending of the ventilat...
Page 7 - WARNING
5 (5) SAFETY WARNING Young children should be supervised to ensure that they do not play with the appliance. The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been giv...
Page 8 - INSTRUCTIONS
6 (6) USE INSTRUCTIONS The re-usable aluminium grease filters supplied with this rangehood should be cleaned every month or so to avoid grease build-up. To remove the grease filter, release the locking mechanism at the front of the filter, and lower the filter slightly to unhook it at the back. Whil...
Page 9 - SPEED ADJUSTMENT - See pictures
7 SPEED ADJUSTMENT - See pictures 1. Push the “Low” button, the indicating light 1 is on, and the motor runs at low speed. Push it again and the motor will stop. 2. Push the “Mid” button, the indicating light 2 is on, and the motor runs at mid speed. Push it again and the motor will stop. 3. Push th...
Page 10 - Cleaning the grease filter mesh; Notice of cleaning cooker hood
8 (7) MAINTENANCE 7.1 Cleaning the grease filter mesh The filter mesh is made of high-density stainless steel. Please do not use corrosive detergent on it. Keeping this filter clean will keep the appliance running correctly. Please strictly follow the guidelines below. Method 1: Place the mesh in 40...