Omega Altise ACUBOB - Manuals

Page 2 - IMPORTANT SAFETY INSTRUCTIONS

OMEGA ALTISE IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could re...

Page 3 - GENERAL HEATER PARTS

OMEGA ALTISE GENERAL HEATER PARTS LED INDICATORS (MAIN UNIT ONLY) LCD INDICATORS (REMOTE CONTROL ONLY)

Page 4 - GETTING STARTED; Carefully remove the heater from the plastic bag and the carton.; FUNCTION SETTING; MANUAL OPERATION; the default HIGH HEAT MODE.

OMEGA ALTISE GETTING STARTED 1. Carefully remove the heater from the plastic bag and the carton. 2. Place the heater on a stable and flat surface. 3. Set the main power switch to the ’OFF’ position (see diagram on right). Plug the cord set into a 240V~A.C. electrical outlet. Turn the main POWER swit...

Page 5 - DISPLAY ON UNIT; COOL FAN MODE

OMEGA ALTISE 2. SET THE FUNCTION YOU WANT (MODE) : Pressing the ’MODE’ button will set the heater into different FUNCTIONS or MODES. The correct mode will be reflected on the LED display of the heater. Your heater has 4 modes: COOL FAN, LOW HEAT, HIGH HEAT and AUTO (See figures below). DISPLAY ON UN...

Page 6 - ADJUST THE SET TEMPERATURE

OMEGA ALTISE 3. SET THE TEMPERATURE YOU WANT (UP and DOWN) : When the unit is in the AUTO MODE ONLY, the LCD will display a ’SET TEMP’ (Set Temperature) indicator. The digital temperature readout display will be flashing (see figure). a. To adjust the set temperature, while the digital readout is fl...

Page 7 - REMOTE CONTROL OPERATION; work similarly to the Manual Controls.; : Turn the heater ON as per MANUAL OPERATION instructions.; DISPLAY ON REMOTE CONTROL

OMEGA ALTISE REMOTE CONTROL OPERATION 1. lnstall two “AAA” (not included) batteries by sliding the bottom panel of the battery body. 2. The Remote Control Power button is labelled as such. All the functions performed with the Remote Control work similarly to the Manual Controls. 3. When changing mod...

Page 8 - LOW HEAT MODE

OMEGA ALTISE 3. SET THE TEMPERATURE YOU WANT (UP and DOWN) : When the unit is in the AUTO MODE ONLY, the LCD will display a ’SET TEMP’ (Set Temperature) indicator. The digital temperature readout display will be flashing (see figure). a. To adjust the “SET TEMP”, press the ’UP’ button to increase th...

Page 9 - SAFETY FEATURES; TIMER INDICATOR

OMEGA ALTISE 4. WARM A BIGGER SURFACE AREA (OSC – OSCILLATION) : Pressing the ‘OSC’ button will allow the heater to oscillate. The heater can oscillate up to 70 o . To stop the oscillation, press the ‘OSC’ button once more. (see figure below) 5. SET THE SLEEP TIMER (TIMER): The timer function allows...

Page 10 - ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT; WEEE WARNING; check with your local authority for recycling advice.; specifications or appearances without notice.

OMEGA ALTISE CLEANING & MAINTENANCE WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT IMMERSE HEATER IN WATER! Clean the Air Inlet with the vacuum brush attachment on your Vacuum cleaner. Clean the body of the heater with a soft damp cloth. Always make sure that the heater is co...