Page 2 - Page; WARNING; Misuse of this machine may result in serious injury.; This machine is not a toy and should not be operated by children.; SPECIFICATIONS
Page 2 WARNING Misuse of this machine may result in serious injury. Please read and follow all precautions below. This machine is not a toy and should not be operated by children. Take proper safety precautions when using this machine. Do not use the machine for other than its intended purpose and d...
Page 3 - Do not clean with detergent or abrasive chemicals.; FIRST-TIME SET UP PROCEDURE
Page 3 1. Wipe the pan and floss head with a damp clean cloth and dry thoroughly. Do not clean with detergent or abrasive chemicals. 2. P lace the cotton candy machine on a flat stable surface. The machine operates at very high speeds making stability essential. 3. Plug the machine into a grounded o...
Page 4 - For Safety, All four latches must be completely closed and; the equipment and process.
Page 4 4. Carefully, hold the pan on top of the base aligning pan brackets with the four latches. (Fig. 1) 5. Securely latch the pan to the machine by hooking the latch ring over the pan brackets and pressing down on each of the four latches until fullyengaged. (Fig. 2) NOTE: For Safety, All four la...
Page 5 - OPERATION INSTRUCTIONS; nutes
Page 5 OPERATION INSTRUCTIONS 1. Press the power switch ON and allow the machine to run for 1-2 minutes. Note: If the machine begins to vibrate excessively, turn the Power Switch to OFF. Unplug the machine and make sure it’s on a level working surface. 2. Press the heating controller switch ON . All...
Page 6 - CLEANING; Keep; REMOVING BURNT SUGAR; This package includes a spare belt.
Page 6 CARE & MAINTENANCE CLEANING After your final batch of cotton candy in a session, keep the machine running and hot while cleaning the floss head by slowly pouring a small amount of water into the center. NOTE: The water will immediately become hot steam. Keep the floss head spinning throug...
Page 7 - TROUBLESHOOTING; See “Changing the Belt” under
Page 7 TROUBLESHOOTING MACHINE HAS NO POWER Check to make sure that the bowl is seated correctly and all four latches are engaged and secure. If the safety switch is engaged and both switches are ON, unplug the machine and check the fuse; replace if defective. Contact us for further assistance if th...
