Page 2 - SAVE THIS MANUAL; ed; GENERAL SAFETY RULES; WORK AREA; lit; CALIFORNIA PROPOSITION 65; This is
03 The warnings and precautions discussed in the manual cannot cover all possible conditions and situations that may occur. It must be understood by the user that common sense and caution are factors which cannot be built into this product, but must be supplied by the user. WARNING: SAVE THIS MANUAL...
Page 4 - FEATURES; OPERATION; SPECIFICATIONS; AIR CONSUMPTION; PREPARE THE TOOL; the top of the; LOADING CLEAT NAILS; Handle; Slide Back
07 06 FEATURES ● ● ● ● OPERATION The warnings and precautions discussed above cannot cover all possible conditions and situations that may occur. It must be understood by the user that common sense and caution are factors which cannot be built into this product, but must be supplied by the user. WAR...
Page 5 - Only use; CHANGING THE FOOT PLATE; side to expose the four; LOADING STAPLES
09 08 HTTP://WWW NUMAXTOOLS COM 1-888-669-5672 . . HTTP://WWW NUMAXTOOLS COM 1-888-669-5672 . . MODEL: S50LSDH MODEL: S50LSDH The tool may fire when it is first connected to the air source. Always connect the tool to the air source before loading fasteners to prevent injury from unintended cycling. ...
Page 6 - Correct Placement; Incorrect Placement; NOTE: Please follow your wood manufacture; SETTING THE AIR PRESSURE; pliers
Page 7 - LUBRICATION; Disconnect; CLEANING; RECOMMENDED HOOKUP; Jammed; MAINTENANCE; check it after unpacking.; ANTI DUST
13 12 HTTP://WWW NUMAXTOOLS COM 1-888-669-5672 . . HTTP://WWW NUMAXTOOLS COM 1-888-669-5672 . . MODEL: S50LSDH MODEL: S50LSDH Frequent, but not excessive, lubrication is required for best performance. will lubricate the internal parts. Do not use detergent oil or additives as these lubricants will c...
Page 8 - or; TROUBLESHOOTING; Only use; NUMAX PNEUMATIC NAIL GUNS WARRANTIES; 0 Day Wearable Parts Warranty; NUMAX
15 14 HTTP://WWW NUMAXTOOLS COM 1-888-669-5672 . . HTTP://WWW NUMAXTOOLS COM 1-888-669-5672 . . MODEL: S50LSDH MODEL: S50LSDH Tighten screws. Install overhaul kit. Lack of power. Slow to cycle. Tool is too dry. Air pressure too low.Exhaust blocked. Add about 2-3 drops of lubrication into the air con...