Northern Industrial 10000 BDG - Manuals

5 ALWAYS rem ove the spark plug or spark pl ug wi re before worki ng on the engi ne or generator, thi sprevents accidental starting. ALWAYS provide adequate venti lati on. Do not operate generator in any encl osed or narrow space.Engi nes consume oxygen and gi ve off deadl y carbonm onoxi de, a poi ...

6 Ti ghten or l oosen bel t until : d = 0.016 X L If the control box i s not located on the correct si de for your appli cati on, i t can be rotated to theopposi te side. Fi rst remove the fan vents, thanrem ove the four dri ve end bracket bolts. Rotate thedri ve end bracket 180 ° , re-torque bol ts...

7 T he fi gures gi ven above are for an average l oad such as a bl ower or fan. If the electri c motor i sconnected to a hard starting l oad such as an ai rcompressor, i t will requi re m ore starti ng current. If i t i sconnected to a light load or no l oad such as a powersaw, i t will requi re les...

8 GROUNDING - All uni ts m ust be grounded. Dri ve a 3/4” or 1” copper pipe or rod into the ground cl ose tothe generator. The pipe/rod m ust penetrate moi stearth. Connect an approved ground clamp to the pi pe.Run a 10 gauge wi re from the clamp to the generatorground screw. Do not connect to a wat...

9 TROUBLESHOOTING Proble m Possible Causes Possible Re medie s Vol tage too low. a) Engi ne speed too slow. b) Generator i s overl oaded. c) Bel t sli ppage. (or coupl er sl ippage) a) Bri ng generator to a quali fi edtechni cian for adjustm ent.b) Reduce the l oad. (See LoadAppli cation secti on of...