NordicTrack 3G10WV - Manuals

Page 2 - Preface; atmospheres can represent a safety hazard.

2 – 3G10WV HSPA Wi-Fi Router with Voice Thank you for purchasing NetComm’s HSPA Wi-Fi Router with Voice Preface The purpose of this manual is to provide you detailed information on the installation, operation and application of your HSPA 7.2Mbps Wi-Fi Router with Voice. Important Notice and Safety P...

Page 3 - Table of Contents

3G10WV HSPA Wi-Fi Router with Voice – Table of Contents Thank you for purchasing NetComm’s HSPA Wi-Fi Router with Voice .................................................... 2 Preface ........................................................................................................................

Page 5 - Introduction

Page 7 - Features; devices; Package Contents

3G10WV HSPA Wi-Fi Router with Voice – 7 1.1 Features • This HSPA Wi-Fi Router with Voice allows you to share your G connection with multiple wireless or wired devices • Provides you with worldwide coverage through triple-band HSUPA/HSDPA/UMTS (850 / 1900 / 2100MHz), quad-band EDGE/GSM (850 / 900 / 1...

Page 8 - LED Indicators; G10WV – FRONT BEZEL GRAPHICS; LED

8 – 3G10WV HSPA Wi-Fi Router with Voice 1. LED Indicators The front panel LED indicators are shown in this illustration and followed by detailed explanations in the table below. The background colour of the bezel must be printed WHITE INKAll type and graphics print WHITE INK onto background colour o...

Page 9 - Rear Panel; The rear panel contains the ports for data and power connections.

3G10WV HSPA Wi-Fi Router with Voice – 9 1.4 Rear Panel The rear panel contains the ports for data and power connections. 1 2 3 4 5 6 8 7 (1) Main G Antenna (removable, SMA connection)(2) Power jack for DC power input (12VDC / 1.5A)/Power button() USIM card slot(4) Aux G Antenna (removable, SMA conne...

Page 10 - Quick Setup

Page 11 - Setup Procedure; antennas should be screwed in a clockwise direction.

3G10WV HSPA Wi-Fi Router with Voice – 11 Quick Setup 2.1 Setup Procedure These steps explain how to quickly setup your G router:1: Attach the two G antennas provided to the ports marked Main and AUX on the back of the router. The antennas should be screwed in a clockwise direction. 2: Insert your SI...

Page 12 - Web User Interface

Page 13 - Default Settings

3G10WV HSPA Wi-Fi Router with Voice – 1 Web User Interface This section describes how to access the device via the web user interface using a web browser such as Microsoft Internet Explorer (version 5.0 or later). .1 Default Settings The following are the default settings for the device. • Local (LA...

Page 14 - DHCP Mode

14 – 3G10WV HSPA Wi-Fi Router with Voice .2 TCP/IP Settings DHCP Mode When your Router powers up, the Dynamic Host Configuration Protocol (DHCP) server (on the device) will start automatically. To set your PC for DHCP mode, check the Internet Protocol properties of your Local Area Connection. You ca...

Page 15 - Login Procedure; To login to the web interface, follow the steps below:; Click OK to continue.

3G10WV HSPA Wi-Fi Router with Voice – 15 . Login Procedure To login to the web interface, follow the steps below: NOTE: The default settings can be found in .1 Default Settings. 1: Open a web browser and enter the default IP address for the Router in the Web address field. In this case http://192.16...

Page 16 - Web User Interface Homepage; subsequent chapters introduce the other main menu selections.

16 – 3G10WV HSPA Wi-Fi Router with Voice .4 Web User Interface Homepage The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom). The main menu has the following options: Basic, G Settings, Wireless, Management, Advanced, Voice...

Page 17 - The following table provides further details.; Fields

3G10WV HSPA Wi-Fi Router with Voice – 17 The following table provides further details. Fields Description Software version The software version of the device. Hardware version The Hardware version of the device Bootloader version The bootloader version of the device. Wireless driver version The wire...

Page 18 - G Settings

Page 19 - This menu includes G service Setup and PIN Configuration.; G Service Setup; the following sections for your assistance.

3G10WV HSPA Wi-Fi Router with Voice – 19 G Settings This menu includes G service Setup and PIN Configuration. NOTE: Sections 9. and 9.4.2 also provide information about the G service. 4.1 G Service Setup Select your G service settings according to predefined or custom profiles. Setup instructions ar...

Page 21 - PIN Configuration; PIN Lock Off

3G10WV HSPA Wi-Fi Router with Voice – 21 4.2 PIN Configuration This screen allows for changes to the G SIM card PIN code protection settings. NOTE: If you have entered the incorrect PIN times, your SIM card will be locked for your security. Please call your G Provider for assistance. 4.2.1 PIN Code ...

Page 22 - PIN Lock On

22 – 3G10WV HSPA Wi-Fi Router with Voice PIN Lock On After you are finished using your SIM card for Internet service, you may wish to lock it again. In this case, first go to the G Settings - PIN Configuration screen, as shown below. Select PIN lock ON, enter the PIN code twice. You can select Remem...

Page 23 - section and follow the procedure listed under

3G10WV HSPA Wi-Fi Router with Voice – 2 4.2.2 PIN Code Change If you wish to change your PIN code for greater security, enable the PIN Code protection. Go to the previous section and follow the procedure listed under PIN Lock On . After locking the SIM card, select PIN Code Change and enter your Old...

Page 24 - Wireless

Page 26 - Setup; extra networking security when connecting to remote hosts.; Option

26 – 3G10WV HSPA Wi-Fi Router with Voice 5.1 Setup This screen allows you to configure basic features of the wireless LAN interface. You can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel s...

Page 27 - Security; Click

3G10WV HSPA Wi-Fi Router with Voice – 27 5.2 Security This Router includes a number of security options that provides you with a secure connection to a G network. State-of-the art security includes:• WEP / WPA / WPA2 data encryption • SPI Firewall • VPN Pass-Through• MAC address IP filtering• Authen...

Page 28 - The settings for WPA authentication are shown below.

28 – 3G10WV HSPA Wi-Fi Router with Voice Select SSID Your Service Set Identifier (SSID), sets your Wireless Network Name. You can connect multiple devices including Laptops, Desktop PCs and PDAs to your Wireless Router. To get additional devices connected, scan for a network, and locate the SSID sho...

Page 29 - Configuration; to set the advanced wireless configuration.

3G10WV HSPA Wi-Fi Router with Voice – 29 5. Configuration The following screen appears when you select Configuration. This screen allows you to control the following advanced features of the Wireless Local Area Network (WLAN) interface:• Select the channel which you wish to operate from• Force the t...

Page 32 - MAC Filter; Add; Enter the MAC address on the screen below and click

2 – 3G10WV HSPA Wi-Fi Router with Voice 5.4 MAC Filter This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique 48-bit MAC address.To add a MAC Address filter, click the Add button shown below. To delete a filter, select...

Page 33 - Wireless Bridge; to implement new configuration settings.; Feature

3G10WV HSPA Wi-Fi Router with Voice – 5.5 Wireless Bridge The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge features of the wireless LAN interface.Click Save/Apply to implement new configuration settings. Feature Opt...

Page 34 - Station Info; Refresh; BSSID

4 – 3G10WV HSPA Wi-Fi Router with Voice 5.6 Station Info The following screen appears when you select Station Info, and shows authenticated wireless stations and their status. Click the Refresh button to update the list of stations in the WLAN. BSSID The BSSID is a 48-bit identity used to identify a...

Page 35 - Management

Page 36 - Device Settings; also provides a function for you to update your Routers firmware.

6 – 3G10WV HSPA Wi-Fi Router with Voice Management The Management menu has the following maintenance functions and processes:6.1 Device Settings6.2 Simple Network Management Protocol (SNMP)6. Simple Network Time Protocol (SNTP)6.4 Access Control6.5 Save and Reboot 6.1 Device Settings The Device Sett...

Page 37 - the default screen, close and restart the browser.

3G10WV HSPA Wi-Fi Router with Voice – 7 6.1.2 Update Settings The following screen appears when selecting Update from the submenu. By clicking on the Browse button, you can locate a previously saved filename as the configuration backup file. Click on the Update settings to load it. 6.1.3 Restore Def...

Page 38 - the following screen.

8 – 3G10WV HSPA Wi-Fi Router with Voice 6.1.4 Update Firmware The following screen appears when selecting Update Firmware. By following this screens steps, you can update your Routers firmware. Manual device upgrades from a locally stored file can also be performed using the following screen. 1: Obt...

Page 39 - Configure SNMP agent on G10WV; to log into the web interface.

3G10WV HSPA Wi-Fi Router with Voice – 9 6.2 Configure SNMP agent on G10WV The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings on remote network devices. To do this, the administrator typically runs an SNMP management station progra...

Page 40 - timeservers, tick the box as illustrated below.; First NTP timeserver:; Configure these options and then click Save/Apply to activate.

40 – 3G10WV HSPA Wi-Fi Router with Voice 6. Simple Network Time Protocol (SNTP) This screen allows you to configure the time settings of your Router. To automatically synchronize with Internet timeservers, tick the box as illustrated below. The following options should now appear (see screenshot bel...

Page 41 - Access Control

3G10WV HSPA Wi-Fi Router with Voice – 41 6.4 Access Control The Access Control option found in the Management drop down menu, configures access related parameters in the following three areas:• Services • IP Addresses • Passwords Access Control is used to control local and remote management settings...

Page 42 - IP Address

42 – 3G10WV HSPA Wi-Fi Router with Voice 6.4.2 IP Address The IP Address option limits local access by IP address. When the Access Control Mode is enabled, only the IP addresses listed here can access the device. Before enabling Access Control Mode, add IP addresses with the Add button. On this scre...

Page 43 - admin; Save and Reboot

3G10WV HSPA Wi-Fi Router with Voice – 4 6.4.3 Passwords The Passwords option configures your account access password for your Router. Access to the device is limited to the following three user accounts: • admin is to be used for local unrestricted access control • support is to be used for remote m...

Page 44 - Advanced Setup

Page 45 - This chapter explains advanced setup for your Router:

3G10WV HSPA Wi-Fi Router with Voice – 45 Advanced Setup This chapter explains advanced setup for your Router:

Page 46 - See the field descriptions below for more details.; These options are used for special DHCP set up.

46 – 3G10WV HSPA Wi-Fi Router with Voice 7.1 Local Area Network (LAN) This screen allows you to configure the Local Area Network (LAN) interface on your Router. See the field descriptions below for more details. Option Description IP Address Enter the IP address for the LAN interface Subnet Mask Ent...

Page 47 - show up on the same page as below:; Enter the secondary IP address for the LAN interface.

3G10WV HSPA Wi-Fi Router with Voice – 47 Enable DHCP Server Relay To relay DHCP requests from the subnet with no DHCP server on it to a DHCP server on other subnets. DHCP Server Relay is disabled by default. To access enable DHCP relay, please un-tick NAT enable first, that means to disable NAT firs...

Page 48 - maximum of 2 entries can be configured.

48 – 3G10WV HSPA Wi-Fi Router with Voice 7.2 Network Address Translation (NAT) 7.2.1 Port Forwarding Port Forwarding allows you to direct incoming traffic from the Internet side (identified by Protocol and External port) to the internal server with a private IP address on the LAN side. The Internal ...

Page 49 - Options

3G10WV HSPA Wi-Fi Router with Voice – 49 Options Description Select a ServiceOrCustom Server User should select the service from the list. Or Create a customer server and enter a name for the server Server IP Address Enter the IP address for the server. External Port Start Enter the starting externa...

Page 50 - entries can be configured.

50 – 3G10WV HSPA Wi-Fi Router with Voice 7.2.2 Port Triggering Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remot...

Page 51 - Apply

3G10WV HSPA Wi-Fi Router with Voice – 51 Options Description Select an ApplicationorCustom Application User should select the application from the list. or User can enter the name of their choice. Trigger Port Start Enter the starting trigger port number (when you select custom application). When an...

Page 53 - Incoming IP Filter

3G10WV HSPA Wi-Fi Router with Voice – 5 Options Description Filter Name The filter rule label Protocol TCP, TCP/UDP, UDP or ICMP Source IP address Enter source IP address Source Subnet Mask Enter source subnet mask Source Port (port or port:port) Enter source port number or port range Destination IP...

Page 54 - Click Add to display the following screen.

54 – 3G10WV HSPA Wi-Fi Router with Voice 7.3.2 Parental Control This Parental Control allows you to restrict access from a Local Area Network (LAN) to an outside network through the Router on selected days at certain times. Make sure to activate the Internet Time server synchronization as described ...

Page 55 - Routing; Default Gateway

3G10WV HSPA Wi-Fi Router with Voice – 55 7.4 Routing Default Gateway , Static Route and Dynamic Route settings can be found in the Routing link as illustrated below. 7.4.1 Default Gateway If the Enable Automatic Assigned Default Gateway checkbox is selected, this device will accept a default Gateway...

Page 56 - Click the Add button to display the following screen.

56 – 3G10WV HSPA Wi-Fi Router with Voice 7.4.2 Static Route The Static Route screen displays the configured static routes. Click the Add or Remove buttons to change settings. Click the Add button to display the following screen. Enter Destination Network Address, Subnet Mask, Gateway IP Address and/...

Page 57 - Save

3G10WV HSPA Wi-Fi Router with Voice – 57 7.4.3 Dynamic Route To activate this option, select the Enabled radio button for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the Enabled checkbox for that interface. Click...

Page 59 - Voice

Page 60 - Configuring your G10WV for placing Voice Calls

60 – 3G10WV HSPA Wi-Fi Router with Voice The G10WV HSPA 7.2Mbps Wi-Fi Router with Voice allows you to make telephone calls over the G Mobile/ Cellular Telephone network using a standard Analogue Telephone via the built in RJ-11 Phone port. Please refer to the documentation provided by the manufactur...

Page 61 - Status

Page 63 - Diagnostics; Help link; Test

3G10WV HSPA Wi-Fi Router with Voice – 6 9.1 Diagnostics The Diagnostics menu provides feedback on the connection status of the device. The individual tests are listed below. If a test displays a fail status:1: Click on the Help link 2: Now click Re-run Diagnostic Tests at the bottom of the screen to...

Page 64 - System Log

64 – 3G10WV HSPA Wi-Fi Router with Voice 9.2 System Log This function allows you to view system events and configure related options. Follow the steps below to enable and view the System Log.1: Click Configure System Log to continue. 2: Select the system log options (see table below) and click Save/...

Page 65 - : Click View System Log. The results are displayed as follows.

3G10WV HSPA Wi-Fi Router with Voice – 65 Option Description Log Indicates whether the system is currently recording events. You can enable or disable event logging. By default, it is disabled. Log level Allows you to configure the event level and filter out unwanted events below this level. The even...

Page 66 - G Status

66 – 3G10WV HSPA Wi-Fi Router with Voice 9. G Status Select this option for detailed status information on your Routers G connection. Consult the table on the next page for detailed field descriptions.

Page 69 - Statistics; Interface

3G10WV HSPA Wi-Fi Router with Voice – 69 9.4 Statistics These screens provide detailed information for:• Local Area Network (LAN) and Wireless Local Area Network (WLAN)• G Interfaces NOTE: These statistics page refresh every 15 seconds. 9.4.1 LAN Statistics This screen displays statistics for the Et...

Page 70 - Service

70 – 3G10WV HSPA Wi-Fi Router with Voice 9.4.2 3G Statistics Click G network in the Statistics submenu to display the screen below. Service Shows the service type Inbound Octets Number of received octets over the interface. Packets Number of received packets over the interface. Drops Received packet...

Page 71 - Route; Select Route to display the paths the Router has found.; Field

3G10WV HSPA Wi-Fi Router with Voice – 71 9.5 Route Select Route to display the paths the Router has found. Field Description Destination Destination network or destination host Gateway Next hop IP address Subnet Mask Subnet Mask of Destination Flag U: route is up !: reject route G: use gateway H: ta...

Page 72 - ARP; Click ARP to display the ARP information.; Dynamic Host Configuration Protocol (DHCP); Click DHCP to display the DHCP information.

72 – 3G10WV HSPA Wi-Fi Router with Voice 9.6 ARP Click ARP to display the ARP information. Field Description IP address Shows IP address of host pc Flags Complete Incomplete Permanent Publish HW Address Shows the MAC address of host pc Device Shows the connection interface 9.7 Dynamic Host Configura...

Page 73 - PING; The above screen is not showing successful ping result

3G10WV HSPA Wi-Fi Router with Voice – 7 9.8 PING The PING menu provides feedback of connection test to an IP address or a host name. Input a IP address or a host name, e.g www.google.com and press Submit. The connection test result will be shown as below. The above screen is not showing successful p...

Page 74 - CLI commands Via Telnet

74 – 3G10WV HSPA Wi-Fi Router with Voice CLI commands Via Telnet

Page 75 - CLI commands via Telnet; Show all CLI commands

3G10WV HSPA Wi-Fi Router with Voice – 75 CLI commands via Telnet Show all CLI commands Description: List all available CLI commands that the G router supports.Synopsis: help | ?Example:> help?helplogoutrebootddnsdumpcfgarpdefaultgatewaydhcpserverdnslanpasswdremoteaccessrestoredefaultroutesaveping...

Page 76 - Radio Band

76 – 3G10WV HSPA Wi-Fi Router with Voice Description: End the telnet sessionSynopsis: logoutExample:> logoutReset/reboot deviceDescription: To reboot the router.Synopsis: rebootExample:> rebootRadio Signal StrengthDescription: Display the G radio signal strength.Synopsis: sierra show --signal ...

Page 78 - Authentication Method set and read

78 – 3G10WV HSPA Wi-Fi Router with Voice Description: To report the current available and supported network technologies being used.Synopsis: sierra show --modeExample:> sierra show --modemode: UMTS(Valid values: “GSM”, “GPRS”, “EDGE”, “UMTS”, “HSDPA”, “HSUPA”) • sierra show --registration Descri...

Page 79 - Set Radio Band for APN profile

3G10WV HSPA Wi-Fi Router with Voice – 79 Description: To set and query authentication method (PAP/CHAP/AUTO) for PDP-IP packet data calls if the profile supports.Synopsis: Authentication method set: sierra set --auth <profile> <method><profile> 1:Custom APN<method> 0:AUTO 1:P...

Page 80 - Connect / Disconnect PPP session

80 – 3G10WV HSPA Wi-Fi Router with Voice > sierra set --comp 1 0 enable • sierra show --comp <profile> Description: To display the IP header or data compression status.Synopsis: sierra show --comp <profile><profile> 1: Custom APNExamples:> sierra show --comp 1Profile1: IPH is...

Page 81 - features of the wireless LAN interface.

3G10WV HSPA Wi-Fi Router with Voice – 81 Synopsis: sierra show --PIN-LOCKExample:> sierra show --PIN-LOCKPIN code protection is disabled • sierra show --SIM Description: To display the SIM card status.Synopsis: sierra show --SIMExample:> sierra show --SIMSIM inserted (SIM card is correctly ins...

Page 82 - set based on country requirements.

82 – 3G10WV HSPA Wi-Fi Router with Voice > wlanwlan command usage :wlan config [option]wlan security [option]wlan macfilter [option]wlan wds [option]wlan info [option]wlan –helpEach option will be explained separately below.Note: The settings changed from these commands take effect immediately an...

Page 88 - Configure wireless LAN MAC filter

88 – 3G10WV HSPA Wi-Fi Router with Voice Configure wireless LAN MAC filter Description: Enable, disable and configure the wireless LAN MAC filter feature. This feature enables the router to allow or deny connection from wireless client based on the MAC address. Synopsis: wlan macfilter [--mode <d...

Page 93 - config remote bridge MAC address

3G10WV HSPA Wi-Fi Router with Voice – 9 config AP mode.Default value : ap--restrict <enabled|disabled> config bridge restrict mode.Default value : disabled --rmac1 <MACaddress>--rmac2 <MACaddress>--rmac <MACaddress>--rmac4 <MACaddress> config remote bridge MAC address N...

Page 94 - list parameters of macfilter command

94 – 3G10WV HSPA Wi-Fi Router with Voice --macfilter list parameters of macfilter command --wds list parameters of wds command --station list authenticated wireless stations and their status NOTE 5: You can use this command to view your wireless settings; no matter the settings are modified from web...

Page 96 - Contact Information

NetComm Limited ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia E – [email protected] W – www.netcomm.com.au Contact Information If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer Support Department. Email: [email protected]...