Nokia 9828 - Manuals

GB 6 Rear Panel AUDIO L Rphono connectors Stereo outputs forconnection to a HiFisystem TV SCART for connectionto the TV AUX SCART for connection to aVCR, or an analoguesatellite receiver DIGITAL AUDIOphono connector S/PDIF output for con-nection to a HiFi sys-tem Mains lead 95 - 250 V AC50-60 Hz SER...

GB 7 Inserting the CA module and the smartcard Insert the CA module and the smartcard according to the instruc-tions provided with the module. ABOUT THE SMARTCARD AND CA MODULE General To be able to receive terrestrial scrambled digital channels you willneed a CA module and a Smartcard from a Servic...

GB 8 The box for your Mediamaster should contain the following items: • the Mediamaster • remote control with 2 AAA batteries • SCART lead (fully featured 1,0 metre) • aerial/RF lead (double screened 1,5 metres) • Owner’s Manual • Software License agreement • mains lead CONNECTION OF THE MEDIAMASTER...

GB 9 Connecting to the TV aerial You can connect the Mediamaster to the following type of aerials: 1. Standard outdoor aerial Where possible, use an outdoor roof aerial intended for receiv-ing UHF channels between 21 and 69. Please note the following: • In some block of flats, the roof-mounted aeria...

GB 10 • Connect a SCART lead between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. • Connect a SCART lead between the VCR and the AUX SCART socket on the Mediamaster. • Connect a SCART lead between the VCR and the second SCART socket on the TV. • Connect an RF lead from...

GB 12 This procedure is necessary only if your Mediamaster is con-nected to the TV with an RF lead and no SCART leads areused. To tune your TV to the RF signal you might also need your TVmanual in addition to this manual. The steps below explain whatto do if you have been unable to use SCART leads i...

GB 13 Language Select the desired menu language.This will also be the main language for audio and subtitling. General Information Once you have correctly connected the Mediamaster, you alsohave to perform a “First Time Installation.”During this procedure, helpful information is displayed at the bot-...

GB 14 FIRST TIME INSTALLATION Channel Search The Channel Search procedure can be performed in two differ-ent ways: Automatic Search or Manual Search . Manual Search * When you perform a Manual search you first need to enter someparameters for the channel search to work. The information you need to e...

GB 15 FIRST TIME INSTALLATION Finishing the first time installation The channels found at the search procedure will now be saved.A message telling that the installation procedure is completed willbe shown on the screen. Press OK in order to start watching channels from the box. Channel Search Progre...

GB 16 VIEWING MODE General Information The following describes the basic functions of your Mediamasterwhile watching terrestrial digital TV . Some of the functions described here are dependent on theService Provider and can only be used if they are included inthe transmitted programme information. P...

GB 17 VIEWING MODE Information. The “i” Button The Mediamaster has the ability to display information about pro-grammes currently being broadcast as well as those being broad-cast next. By pressing the “ i ” button while watching TV you will get a spe- cial Programme Information Banner. Select chann...

GB 18 List of Channels At the channel search procedure, 2 Channel lists named “TVchannels” and “Radio channels” are created. A Radio list will onlybe created and highlighted when radio channels were availableto download. In the Channel lists scrambled channels are marked with a pic-ture of a Smartca...

GB 19 VIEWING MODE TV Release (0) With the 0 button you can toggle between: digital terrestrial TVanalogue terrestrial TVvideo (the video must be switched on) (This is only valid if the units are connected via SCART cables, andnot by a RF connection.) Video Recording Please note, that during the rec...

GB 20 MAIN MENU General Information Many of the functions of the Mediamaster are available from theMain Menu. • Press MENU to open it. TV and Radio Channels Please refer to “List of channels” on page 18. Edit Channels From these menus you can create and edit channel lists. You can,among other things...

GB 24 MAIN MENU System Configuration You will be asked to enter your access code before you can openthis menu. The code is preset to 1234 from the factory.(The code can be changed from the Parental Control menu. Re-fer to page 26.) If you want to customize the system to suit you better, you canspeci...

GB 25 MAIN MENU TV Settings From here you can adjust settings concerning your TV. TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens.Select 16:9 for a wide screen TV. TV signal If the teletext function does not work when watching channelsfrom an ...

GB 26 MAIN MENU Receiver Upgrade For future update, if any, of the box, it will be possible to downloadnew versions of the system software. Enter this menu to check for new software. If new software isavailable you will get information in the menu on how to proceed. NEVER turn off the Mediamaster, n...

GB 27 MAIN MENU Appearance Preferences Banner time-out When you switch channels, an information banner will be shownfor a few seconds. You can select for how long the banner willbe shown. Volume bar Select whether or not you want the volume bar to appear on thescreen when you change the volume. Volu...

GB 28 MAIN MENU System Information If you have to contact your service provider or a service center,they might ask for information available from this menu. There-fore, it is important that you first check the information in thefollowing menus. Diagnostics To find out the condition of certain parts ...

GB 29 GLOSSARY OF TERMS Access Authorisation to use the coding system to purchase /order TV programmes. Audio system With digital reception, the sound is transmitted in pack-ages and is selected either in a special audio mode or pre-selected by using the installation set-up. This makes itpossible to...

GB 30 PROBLEM SOLVING Problem The display on the front panel doesnot light up/is not lit. No sound or picture, but the frontpanel shows the time or - - : - -. Bad picture/blocking error. The front panel shows a channelnumber, but you can’t see anythingfrom digital TV. When the Mediamaster tries to f...

GB 32 TECHNICAL SPECIFICATIONS Transmission Standards DVB, MPEG 2, OFDM RF input Modulator output In-/output connector IEC female / IEC maleRF input frequency 470 to 862 MHz RF input power level -78 to -30 dBmRF impedance 75 Ω Frequency range Loop through 47-862MHz Frequency range RF modulator 470-8...