Nikon UPS - Manuals - manualsarea.com

Page 2 - Stage 2: Preliminary Shutdown

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 2 I NTRODUCTION UPS/400 is power monitoring software that continuously monitors your UPS hardware, 24 hours a day, 7 days a week, for alerts indicating an AS/400 system power fluctuation or loss. Upon detecting a notification, UPS/400 sen...

Page 3 - Stage 4: System Restore and Follow-up Monitoring; shutdown

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 3 Stage 4: System Restore and Follow-up Monitoring • If power is returned, all active users are notified and the system is fully restored to its original active state. • Remaining battery power is monitored by the system administrator thr...

Page 4 - install the product for you. If you are re-installing; First Installation — CD; The product information will automatically be installed.; First Installation — Tape; Use the command GO ICM to access the ICOM/400 Main Menu.; Upgrade; NOTE; library on the new system before proceeding with step 1.

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 4 I NSTALLATION /R EINSTALLATION I NSTRUCTIONS If you are installing UPS/400 for the first time or reinstalling, the instructions are the same. The program will install the product for you. If you are re-installing UPS/400 , the installat...

Page 5 - Internet Download Installation; CRTLIB UPSTRIAL; of directory where you downloaded the; CALL; or; GO UPSMON

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 5 Internet Download Installation 1. At the AS/400 command prompt, type: CRTLIB UPSTRIAL , then: CRTSAVF UPSTRIAL/UPSTRIAL 2. Go to the Pinnacle website at http://www.pbsnow.com, go to “Products.” Go to “UPS/400” and click on “Download you...

Page 6 - IPL

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 6 G ETTING S TARTED Use the command STRUPS400 to start UPS/400 . This will transfer you to the UPS/400 Main Menu. Because UPS/400 runs within its own subsystem, a userid named UPS400 was set up during the installation process. The userid ...

Page 7 - Option; UPS/400 Power Monitor Started...”

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 7 M AIN M ENU This is the main menu for UPS/400 that provides access to all other system functions. However, where the user knows the display name, a menu transfer can be made directly to the desired system function. HELP is available fro...

Page 8 - Note

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 8 S YSTEM A TTRIBUTES The System Attributes display is used to identify the system parameters to be used by UPS/400 to create an orderly system shutdown during a power loss. During a trial period of UPS/400 , the date the trial copy expir...

Page 11 - is turned on or off from the; “ATTENTION: POWER RESTORED! The AS/400 has just been switched back to

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 11 S YSTEM A TTRIBUTES (T EST MODE ) Test mode of UPS/400 is turned on or off from the UPS/400 System Attributes display by pressing F19 (not shown on the screen). Test mode should not be started until all entries have been made in the Sy...

Page 13 - “Attention – The

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 13 A N E XAMPLE The following narrative describes an example of the functions performed by UPS/400 during a power loss. The functions performed are based on the system default values carried in the System Attributes screen. The system adm...

Page 15 - will

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 15 R EMOTE S YSTEMS M AINTENANCE (N ETWORKING ) The Remote Systems Maintenance screen allows the user to identify remote network AS/400s that will be notified by UPS/400 in case of a power failure and subsequent power restoration. Any AS/...

Page 16 - sensor cables can be used.

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 16 UPS/400 N ETWORK S UPPORT Note: The sensor cable from the UPS may be connected to an AS/400 on the network. All AS/400s to be networked should be connected to the same power source. The AS/400 with the sensor cable is the “notifying sy...

Page 26 - by keying in STRUPS400 and press Enter.

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 26 T O M AKE UPS/400 P ERMANENT To make UPS/400 permanent, the user should complete and return the AS/Manager License agreement to PBS. Based on your CPU serial number(s), PBS product support will issue a permanent security number(s). To ...

Page 27 - PRODUCT SUPPORT; Review the documentation and help text provided by; PRODUCT WARRANTY AND MAINTENANCE:

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 27 P RODUCT W ARRANTY AND S UPPORT This section contains important warranty and product support information. Please read it carefully. PRODUCT SUPPORT : UPS/400 has been thoroughly tested and comes with online help text as well as user do...

Page 28 - Order PTFs for any AS/Manager product

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 28 R EMOTE C USTOMER S UPPORT Automated Customer Support (ACS) is designed to permit remote user access to the PBS customer support AS/400. This product is offered at no charge to customers who are under a software maintenance license agr...

Page 29 - PTF ID; : Provided to you by AS/Manager technical support; CUSTOMER INFORMATION; will be able to sign onto your AS/400 to provide online support.; Please contact PBS technical

UPS/400 . . . an IBM AS/400 UPS power monitoring system . . . 29 procedure – and off at the end. You must insure that there are no other lines varied onto the resource that you name for this line. In most cases the screen can be used with the provided defaults. • Enter the resource name if different...