Nikon SB7I01(B1) - Manuals - manualsarea.com

Page 2 - Camera Control Pro 2; Overview; Windows

2 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Overview Introduction 3 About This Manual 6 System Requirements Windows 7 Macintosh 8 Installing Camera Control Pro 9 Windows 10 Macintosh 16 Getting Started Starting and Exiting Camera Control Pro 21 Getting He...

Page 3 - Introduction

3 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Introduction 1/3 This man u al has been written to help you take advantage of the many features in-cluded in Camera Control Pro 2. Be sure to read this manual thoroughly, and to keep it handy when using Camera C...

Page 4 - Camera Control Pro

4 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Camera Control Pro Changes made to settings in the Camera Control Pro window only apply to pho to graphs taken after the changes are made, not to photographs that have already been taken. Camera Control Pro can ...

Page 5 - Notices; Note; Customer Support and Registration; To link to a Nikon customer support website, click; Link to Nikon; in the Camera; here; for more

Overview Using Camera Control Pro Appendices Return to fi rst page 5 Camera Control Pro 2 Overview Introduction 3/3 Notices • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by a...

Page 6 - About This Manual; How to Use This Manual; Blue underlined text

6 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 About This Manual How to Use This Manual The pages of this manual are structured as shown here: 0WFSWJFX "QQFOEJDFT 3FUVSOUPmSTUQBHF 6TJOH$BNFSB$POUSPM1SP $BNFSB$POUSPM1SP $BNFSB$POUSPMT 5IF&YQPTVSF5BC 5...

Page 7 - System Requirements; Windows Vista; Europe; for contact information.

7 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 System Requirements Windows Before installing Camera Control Pro, be sure that your system meets the following requirements: CPU Intel Celeron, Pentium 4, or Intel Core series processor with a clock speed of 1 G...

Page 8 - Macintosh; USB

8 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 System Requirements Macintosh Before installing Camera Control Pro, be sure that your system meets the following requirements: CPU PowerPC G4 or G5 model, Intel Core, or Intel Xeon with a clock speed of 1 GHz or...

Page 9 - Installing Camera Control Pro; sy; for Camera Control; Existing Versions of Camera Control Pro

9 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Before installing Camera Control Pro:• Conﬁ rm that the computer satisﬁ es the sy system requirements stem requirements for Camera Control Pro. • Exit any other applications that ma...

Page 10 - Camera Control Pro 2 Install Options; If the Language Selection Dialog Is Not Displayed; My Computer; Allow

10 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Windows 1/6 Use an account with administrator privileges when installing Camera Control Pro. Camera Control Pro 2 Install Options To display install options for Camera Control Pro:...

Page 11 - To uninstall Camera Control Pro, see; Uninstalling; Easy Install

11 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Windows 2/6 To uninstall Camera Control Pro, see Uninstalling Uninstalling Camera Control Pro Camera Control Pro . Easy Install : Install the minimum software needed to run Camera ...

Page 12 - Click; Follow the steps below to install Camera Control Pro:; Next

12 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Windows 3/6 1 Click Easy Install . Follow the steps below to install Camera Control Pro: 2 Click Next .

Page 13 - Personalize your copy of Camera Control Pro (; After reading the license agreement (; I accept the terms of the

13 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Windows 4/6 4 Personalize your copy of Camera Control Pro ( ) and click Next ( ). 3 After reading the license agreement ( ), select I accept the terms of the license agreement ( ) ...

Page 14 - Install; Camera Control Pro to.” Click; to install Camera Control Pro to this folder,; Change...; to select another destination.

14 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Windows 5/6 6 Click Install . 5 The destination folder for Camera Control Pro will be displayed under “Install Camera Control Pro to.” Click Next to install Camera Control Pro to t...

Page 15 - Yes; and remove the installer CD from the CD-ROM drive.; Finish

15 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Windows 6/6 8 Click Yes and remove the installer CD from the CD-ROM drive. If a dialog is displayed directing you to restart the computer, follow the on-screen instructions. This c...

Page 16 - OK; Welcome

16 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 2 The following dialog will be displayed; enter an administrator name and password and click OK . Installing Camera Control Pro Macintosh 1/5 Use an account with administrator privileges when installing Camera ...

Page 18 - Easy; Accept

18 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Macintosh 3/5 1 Click Easy Install . Follow the steps below to install Camera Control Pro: 2 After reading the license agreement ( ), click Accept ( ).

Page 20 - Quit

20 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Installing Camera Control Pro Macintosh 5/5 6 Click Quit . 7 Click OK and remove the installer CD from the CD-ROM drive. This completes installation of Camera Control Pro.

Page 21 - Starting and Exiting Camera Control Pro; Starting Camera Control Pro

21 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 1 Turn the camera oﬀ and use the interface cable to connect the camera to the computer as described in the camera manual. If you are using a D1-series camera, choose “PC” as the operating mode. If you are using...

Page 22 - USB Connection to Windows Vista/XP Computers

22 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 2 Turn the camera on. If Nikon Transfer or PictureProject Transfer starts, click the close button. USB Connection to Windows Vista/XP Computers When a camera with USB interface is connected to a Windows XP comp...

Page 23 - Method 1; Product Key; product key

23 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Starting and Exiting Camera Control Pro 3/7 3 Start Camera Control Pro. Windows Method 1 : Double-click the Camera Control Pro 2 shortcut on the desktop. Method 2 : Click Start and select Camera Control Pro 2 i...

Page 24 - The Camera Control Pro window will be displayed.

24 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Starting and Exiting Camera Control Pro 4/7 4 The Camera Control Pro window will be displayed. Windows Macintosh

Page 25 - Buy; No Camera Connected

25 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Starting and Exiting Camera Control Pro 5/7 Product Key If prompted to supply a product key product key , enter the key found on the product packaging and click OK . Users of the trial version will see a dialog...

Page 26 - Exiting Camera Control Pro; Exit; from the; File; Quit Camera Control Pro; from the application menu.

26 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Starting and Exiting Camera Control Pro 6/7 Exiting Camera Control Pro Windows Select Exit from the File menu. Macintosh Select Quit Camera Control Pro from the application menu.

Page 27 - Disconnecting the Camera; • USB

27 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Disconnecting the Camera To disconnect the camera: • USB (PTP or MTP/PTP)/IEEE 1394 (FireWire) : Turn the camera oﬀ and disconnect the interface cable. • USB (Mass Storage) : When using a D100 camera under Wind...

Page 28 - Getting Help; To view help on Camera Control Pro, select; Camera Control Pro Help; Help

28 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Getting Help To view help on Camera Control Pro, select Camera Control Pro Help from the Help menu. Macintosh Windows

Page 29 - Software Updates; Check for Software; menu. If an update is available, an update dialog will be; Downloading Updates

29 Using Camera Control Pro Appendices Return to ﬁ rst page Overview Camera Control Pro 2 Software Updates Camera Control Pro is equipped with an automatic update function known as Nikon Message Center. Nikon Message Center checks for updates to a variety of Nikon digital products, including Camera ...

Page 30 - Using Camera Control Pro

Overview Appendices Return to ﬁ rst page 30 Using Camera Control Pro Camera Control Pro 2 Using Camera Control Pro Screen Layout 31 Capturing Photographs to Disk 33 Viewing Captured Photographs 39 Time Lapse Photography 42 Live View 46 The Camera Control Pro Window 50 Camera Controls 54 Saving and L...

Page 31 - Screen Layout; Menu bar

Overview Appendices Return to ﬁ rst page 31 Using Camera Control Pro Camera Control Pro 2 Screen Layout 1/2 Camera Control Pro screen layout is described below using the D3 as an example. Windows Menu bar Connection status Connection status : Shows the status and name of any cameras connected. / : V...

Page 33 - Capturing Photographs to Disk; Start Camera Control Pro.; Download Options...; in the; Tools; menu to display download op-

Overview Appendices Return to ﬁ rst page 33 Using Camera Control Pro Camera Control Pro 2 Capturing Photographs to Disk 1/6 1 Start Camera Control Pro. If Camera Control Pro is running when a supported camera connected, pictures taken with the camera will be stored on your computer hard disk, not th...

Page 34 - Adjust capture options:; Folder for images downloaded from the camera; . The dialog shown at below will be dis-; File Naming Conventions

Overview Appendices Return to ﬁ rst page 34 Using Camera Control Pro Camera Control Pro 2 Capturing Photographs to Disk 2/6 3 Adjust capture options: Folder for images downloaded from the camera Select the folder to which photographs will be down load ed as they are tak-en. Next ﬁ le name to be used...

Page 35 - When a new image is received from camera; : Photographs are not displayed after being saved to the com-; Show it with Viewer; : Photographs are displayed in the; viewer window; (available only if Capture NX is installed; Step 3 continues on the next page

Overview Appendices Return to ﬁ rst page 35 Using Camera Control Pro Camera Control Pro 2 Capturing Photographs to Disk 3/6 When a new image is received from camera Choose the application that will be used to display captured photographs after they are saved to disk. • Do nothing : Photographs are n...

Page 36 - Image Authentication; Attach IPTC Information; Embed ICC Profi le

Overview Appendices Return to ﬁ rst page 36 Using Camera Control Pro 36 Camera Control Pro 2 Capturing Photographs to Disk 4/6 Attach IPTC Information Check this option to add IPTC information to captured images and enable the Copy Shooting Data to IPTC Caption option. IPTC Information… Click ing th...

Page 38 - histograms

Overview Appendices Return to ﬁ rst page 38 Using Camera Control Pro Camera Control Pro 2 Capturing Photographs to Disk 6/6 6 Click Close to close the Status dialog. 5 Take pictures using the camera shutter-release button or the AF and Shoot or Shoot but tons in the Camera Control Pro window. The St...

Page 39 - Item; Viewing Captured Photographs

Overview Appendices Return to ﬁ rst page 39 Using Camera Control Pro Camera Control Pro 2 If Show it with Viewer is selected for When a new image is received from camera When a new image is received from camera in the “ “Download Options” dialog Download Options” dialog , pictures will automatically...

Page 40 - The Toolbar; The toolbar contains the following items:; Show Focus Point

Overview Appendices Return to ﬁ rst page 40 Using Camera Control Pro Camera Control Pro 2 Viewing Captured Photographs 2/3 The Toolbar The toolbar contains the following items: Item Name Description Back Click this button or press the left arrow on the keyboard to select the next image to the left i...

Page 41 - The Thumbnail Area; Show it with Viewer

Overview Appendices Return to ﬁ rst page 41 Using Camera Control Pro Camera Control Pro 2 The Thumbnail Area Lists the images in the folder selected for Folder for images downloaded from Folder for images downloaded from the camera the camera in the “Download Options” dialog, sorted by date of modiﬁ...

Page 42 - Time Lapse Photography; Select; Time Lapse Photography...; from the Camera menu. The Time

Overview Appendices Return to ﬁ rst page 42 Using Camera Control Pro Camera Control Pro 2 Time Lapse Photography 1/4 1 Select Time Lapse Photography… from the Camera menu. The Time Lapse Pho tog ra phy dialog will be displayed. Using Camera Control Pro, you can take a series of photographs automatic...

Page 43 - Before shooting starts, adjust the following settings:; Autofocus before each shot; in the Time Lapse Photography dialog.; Auto bracketing; dialog shown at right will be displayed.

Overview Appendices Return to ﬁ rst page 43 Using Camera Control Pro Camera Control Pro 2 Time Lapse Photography 2/4 2 Before shooting starts, adjust the following settings: Autofocus before each shot If this option is checked, the camera will perform an autofocus operation be-fore each shot. If the...

Page 44 - Shots; Time Interval Settings; for 15 minutes; During Time-Lapse Photography

Overview Appendices Return to ﬁ rst page 44 Using Camera Control Pro Camera Control Pro 2 Time Lapse Photography 3/4 3 Use the Shots box to choose a number of shots from 2 to 9,999. This option is not available when Keep shooting until cancelled is selected. 4 The delay between shots can be set to a...

Page 45 - Stop Shooting; Error Logs; The Time Lapse Photography Dialog

Overview Appendices Return to ﬁ rst page 45 Using Camera Control Pro Camera Control Pro 2 Time Lapse Photography 4/4 6 Follow the progress of time lapse photography in the progress dialog. Click Stop Shooting to end time lapse photography at any time. If a num- ber of shots was speciﬁ ed in the “Tim...

Page 46 - Live View; Camera

Overview Appendices Return to ﬁ rst page 46 Using Camera Control Pro Camera Control Pro 2 Live View 1/4 When a camera that supports live view is connected, Live View (Hand-Held) and Live View (Tripod) options are available in the Camera menu. Selecting either of these options opens the “Live View” w...

Page 48 - The following window is displayed when

Overview Appendices Return to ﬁ rst page 48 Using Camera Control Pro Camera Control Pro 2 Live View 3/4 Live View (Tripod) The following window is displayed when Live View (Tripod) is selected in the Camera menu. Image area Focus point for contrast-detect AF Navigation area

Page 50 - The Camera Control Pro Window; Camera Controls; .” The other settings in this; Connection Status; Camera name; On; or; Automatic; is selected for the auto image rotation option in the; Off

Overview Appendices Return to ﬁ rst page 50 Using Camera Control Pro Camera Control Pro 2 The Camera Control Pro Window 1/4 The Camera Control Pro window shows current camera settings, which may be viewed by clicking the ﬁ ve page selection tabs. Camera settings can be altered using the controls in ...

Page 51 - Button; Click this button to view or hide camera controls.; Simulated LCD Panel

Overview Appendices Return to ﬁ rst page 51 Using Camera Control Pro Camera Control Pro 2 The Camera Control Pro Window 2/4 The / Button Click this button to view or hide camera controls. Simulated LCD Panel This panel shows the information displayed in the camera’s viewﬁ nder, with the ex- cep tion...

Page 52 - Shoot Buttons; AF and Shoot; Shoot; buttons will instead be labeled; AF and Start; Start; . Continuous shooting with; The Function Dial

Overview Appendices Return to ﬁ rst page 52 Using Camera Control Pro Camera Control Pro 2 The Camera Control Pro Window 3/4 Shoot Buttons Click either of these buttons to take a photograph at current settings. If a D3, D2-se-ries, D300, D200, D80, D70-series, D50, or D40-series camera is connected, ...

Page 53 - Camera Settings That Can Not Be Adjusted from Camera Control Pro

Overview Appendices Return to ﬁ rst page 53 Using Camera Control Pro Camera Control Pro 2 The Camera Control Pro Window 4/4 Camera Settings That Can Not Be Adjusted from Camera Control Pro The following operations can only be performed using the controls on the camera body: Operation Camera St at us...

Page 54 - Camera Controls; Camera controls are described below using the D3 as an example:; The Exposure 1 Tab; The fol low ing settings can be adjusted from the Exposure 1 tab:; Enable controls on the; Man u al; Speed Priority; Manual; Aperture Pri or i ty

Overview Appendices Return to ﬁ rst page 54 Using Camera Control Pro Camera Control Pro 2 Camera Controls 1/18 Camera controls are described below using the D3 as an example: The Exposure 1 Tab The fol low ing settings can be adjusted from the Exposure 1 tab: ExposureMode Choose an exposure mode. If...

Page 55 - Bulb

Overview Appendices Return to ﬁ rst page 55 Using Camera Control Pro Camera Control Pro 2 Camera Controls 2/18 The Function Dial D100 The D100 can only be used to take photographs when the function dial is set to P , S , A , or M . At other settings, the controls in the Exposure 1 tab will be disabl...

Page 56 - The Exposure 2 Tab; The following settings can be adjusted from the Exposure 2 tab.; “The Mechanical Tab.”

Overview Appendices Return to ﬁ rst page 56 Using Camera Control Pro Camera Control Pro 2 Camera Controls 3/18 The Exposure 2 Tab The following settings can be adjusted from the Exposure 2 tab. Focus PointFocus Area The focus point and focus area can be selected using the arrow buttons; see the came...

Page 57 - Details...; Fine Tune...

Overview Appendices Return to ﬁ rst page 57 Using Camera Control Pro Camera Control Pro 2 Camera Controls 4/18 The Exposure 2 Tab ISO Sensitivity ISO sensitivity can be raised when taking photographs in low light conditions. See the user’s manual provided with your camera for details. AutoISO Sensit...

Page 58 - Edit...; Preset

Overview Appendices Return to ﬁ rst page 58 Using Camera Control Pro Camera Control Pro 2 Camera Controls 5/18 The Exposure 2 Tab Comment D300 D3 D2 series D200 This ﬁ eld lists the comments for all white balance presets. Clicking Edit… when Preset is selected for white balance displays the dialog s...

Page 59 - The Storage Tab; The following settings can be adjusted from the Stor age tab:; Data Format

Overview Appendices Return to ﬁ rst page 59 Using Camera Control Pro Camera Control Pro 2 Camera Controls 6/18 The Storage Tab The following settings can be adjusted from the Stor age tab: Data Format Choose from the ﬁ le types supported by the camera (see the cam-era manual for details). This set t...

Page 60 - Data

Overview Appendices Return to ﬁ rst page 60 Using Camera Control Pro Camera Control Pro 2 The Storage Tab Image Size Choose image size. See the camera manual for details. NEF RAW CompressionNEF (RAW) recording D1H D3 D1X D2 series D200 D300 Choose bit depth (D3 and D300 only) and compression set-tin...

Page 61 - The Mechanical Tab; The fol low ing settings can be ad just ed from the Me chan i cal tab:; Enable controls on the camera body

Overview Appendices Return to ﬁ rst page 61 Using Camera Control Pro Camera Control Pro 2 Camera Controls 8/18 The Mechanical Tab The fol low ing settings can be ad just ed from the Me chan i cal tab: Release ModeShoot ing Mode Sets the shooting mode for D1-series cameras connected in PC mode to Sin...

Page 62 - Auto Bracketing; Fo cus Mode

Overview Appendices Return to ﬁ rst page 62 Using Camera Control Pro Camera Control Pro 2 Camera Controls 9/18 The Mechanical Tab Shots D3 D2 series D300 D200 D80 D70 series D50 D40 series Use the arrows to choose the maximum number of shots that can be taken in a single burst in continuous mode, or...

Page 63 - Main Battery Level

Overview Appendices Return to ﬁ rst page 63 Using Camera Control Pro Camera Control Pro 2 Camera Controls 10/18 The Mechanical Tab Lens Displays the focal length and maximum ap er ture of the lens currently at-tached to the cam era. De pend ing on the lens type, some in for ma tion may not be displa...

Page 64 - Continuous Mode (All Models Except; ity auto

Overview Appendices Return to ﬁ rst page 64 Using Camera Control Pro Camera Control Pro 2 Camera Controls 11/18 Continuous Mode (All Models Except D1 series D100 ) The amount of memory remaining in the camera memory buﬀ er is displayed at the right edge of the simulated LCD panel. This information i...

Page 65 - Picture Control; modify the selected Picture Control; High ISO NR

Overview Appendices Return to ﬁ rst page 65 Using Camera Control Pro Camera Control Pro 2 Camera Controls 12/18 The Image Processing Tab (D3/D300) The following settings can be adjusted from the Image Pro cess ing tab: Picture Control Choose a Picture Control (see the camera manual for details), or ...

Page 66 - Editing Picture Controls; Clicking; Auto

Overview Appendices Return to ﬁ rst page 66 Using Camera Control Pro Camera Control Pro 2 Editing Picture Controls Clicking Edit… in the Image Processing tab displays options for the selected Picture Control (monochrome controls are shown at right, other controls at left). Quick adjust (Non-monochro...

Page 67 - Reset

Overview Appendices Return to ﬁ rst page 67 Using Camera Control Pro Camera Control Pro 2 Editing Picture Controls Save as a new Custom Picture Control Click this button to save settings as a new custom Picture Control. The following dialog will be displayed; name the new control and click Save . OK...

Page 68 - The “Custom Picture Control” Dialog; Manage Picture Control...; in the Image Processing tab displays the dia-; Custom Picture Control; Rename...

Overview Appendices Return to ﬁ rst page 68 Using Camera Control Pro Camera Control Pro 2 The “Custom Picture Control” Dialog Clicking Manage Picture Control… in the Image Processing tab displays the dia- log shown below. Custom Picture Control Select a custom Picture Control. Rename… Rename the sel...

Page 69 - The “Edit Camera Curves” Dialog

Overview Appendices Return to ﬁ rst page 69 Using Camera Control Pro Camera Control Pro 2 The “Edit Camera Curves” Dialog Clicking Edit… when User Custom Curve is selected in the Picture Control set- tings dialog displays the dialog shown below. The controls in the Edit Camera Curves win dow are sim...

Page 70 - “Edit; Image Optimize

Overview Appendices Return to ﬁ rst page 70 Using Camera Control Pro Camera Control Pro 2 Camera Controls 17/18 The Image Processing Tab (Other Cameras) The following settings can be adjusted from the Image Pro cess ing tab: Image Optimize D50 D200 D80 D70 series D40 series Choose the type of image ...

Page 72 - Saving and Loading Camera Control Settings; The Camera Control Pro option in the; Set tings; menu is used to save Camera Con-; tings...

Overview Appendices Return to ﬁ rst page 72 Using Camera Control Pro Camera Control Pro 2 Saving and Loading Camera Control Settings The Camera Control Pro option in the Set tings menu is used to save Camera Con- trol Pro set tings and to load and apply previously saved settings. Load Control Settin...

Page 73 - The Camera Menu; menu contains the following options:; Custom Settings...; Custom Settings dialog; Set Date and Time...

Overview Appendices Return to ﬁ rst page 73 Using Camera Control Pro Camera Control Pro 2 The Camera Menu 1/4 The Camera menu contains the following options: Custom Settings… Selecting this option opens the Custom Settings dialog Custom Settings dialog , where camera Custom Set tings can be ad just ...

Page 74 - Edit Camera Curves...

Overview Appendices Return to ﬁ rst page 74 Using Camera Control Pro Camera Control Pro 2 Edit Camera Curves… (all cameras except D3 D300 ) This op tion is used to create a custom tone com pen sa tion curve and down load it to the cam era, where it applies when “Cus tom” is se lect ed for the camera...

Page 75 - Measure White Balance...; Dust Off Ref Photo; Edit Image Comment...

Overview Appendices Return to ﬁ rst page 75 Using Camera Control Pro Camera Control Pro 2 The Camera Menu 3/4 Measure White Balance… Use this op tion to measure preset white balance. If the cam era cur rent ly con nect ed sup ports multiple values for preset white bal ance, the set ting that will be...

Page 76 - Select Shooting Settings Bank...; Set Bracketing Mode

Overview Appendices Return to ﬁ rst page 76 Using Camera Control Pro Camera Control Pro 2 The Camera Menu 4/4 Select Shooting Settings Bank… D3 D300 D100 D200 D2 series Selecting this option dis plays the dialog shown at right, where you can choose the shooting menu bank in which chang es to setting...

Page 77 - Custom Settings; Cus tom Settings...; menu. The Custom Settings; Changes to Custom Settings

Overview Appendices Return to ﬁ rst page 77 Using Camera Control Pro Camera Control Pro 2 Custom Settings 1/4 Most of the custom settings stored in camera memory can be viewed and adjusted from the Custom Settings window in Camera Control Pro. For more information on Cus tom Set tings, see the doc u...

Page 78 - Choose a Custom Settings bank (Custom Settings set) from the pop-up; to save changes in

Overview Appendices Return to ﬁ rst page 78 Using Camera Control Pro Camera Control Pro 2 Custom Settings 2/4 2 Choose a Custom Settings bank (Custom Settings set) from the pop-up menu at the top right corner or the Cus tom Settings dialog (see the camera manual for details). 3 After making any chan...

Page 79 - Custom Settings for D1-Series and D100 Cameras

Overview Appendices Return to ﬁ rst page 79 Using Camera Control Pro Camera Control Pro 2 Custom Settings 3/4 Custom Settings for D1-Series and D100 Cameras Custom Settings for D1-series and D100 cameras are divided among three tabs: Page 1, Page 2, and Page 3. See the camera manual for details. Cus...

Page 80 - displays an “Edit Custom Settings Comment” dialog, where the com-; to copy the comments to the cam-

Overview Appendices Return to ﬁ rst page 80 Using Camera Control Pro Camera Control Pro 2 Custom Settings for D3, D2-Series, D300, and D200 Cameras Custom Settings in each bank are divided into six groups. The group can be chosen from the group menu or by clicking the Next and Prev. buttons. Group m...

Page 81 - Appendices; Camera Control Pro Preferences; The General Tab; Uninstalling Camera Control Pro; RGB Color Space Profi les; Windows XP; Customer Support

Overview Using Camera Control Pro Return to ﬁ rst page 81 Appendices Camera Control Pro 2 Appendices Camera Control Pro Preferences 82 The General Tab 83 The Color Management Tab Windows 84 The Color Management Tab Macintosh 86 Uninstalling Camera Control Pro Windows 88 Macintosh 89 RGB Color Space ...

Page 82 - Options...; Preferences...; from the application menu; The Pref er enc es dialog contains; General; Color Management

Overview Using Camera Control Pro Return to ﬁ rst page 82 Appendices Camera Control Pro 2 Camera Control Pro Preferences 1/6 To view the Preferences (Options) dialog for Camera Control Pro, select Options… from the Tools menu ( Windows ) or select Preferences… from the application menu ( Macintosh )...

Page 83 - The General tab contains the following items:; for 15 min utes; Always; Browse...

Overview Using Camera Control Pro Return to ﬁ rst page 83 Appendices Camera Control Pro 2 The General Tab The General tab contains the following items: While Camera Control Pro is running, keep camera awake Choose how long the exposure meters remain on when the cam era is operated on battery power. ...

Page 85 - Multiple Displays; RGB Color-Space Profi les; The Color Management Tab

Overview Using Camera Control Pro Return to ﬁ rst page 85 Appendices Camera Control Pro 2 Camera Control Pro Preferences 4/6 Multiple Displays In a multiple display environment, choose a single proﬁ le suited to all displays. Default Display Proﬁ le The default Windows display proﬁ le is “NKMonitor_...

Page 86 - The Macintosh version displays the following options.; Default RGB color space

Overview Using Camera Control Pro Return to ﬁ rst page 86 Appendices Camera Control Pro 2 Camera Control Pro Preferences 5/6 The Color Management Tab (Macintosh) The Macintosh version displays the following options. ColorSync DefaultProﬁ les for Documents Lists the ICC color-space proﬁ le used to di...

Page 87 - Input Profi les

Overview Using Camera Control Pro Return to ﬁ rst page 87 Appendices Camera Control Pro 2 Input Proﬁ les If an input proﬁ le is selected for the default RGB color space, images will be displayed in the sRGB color space. Supported Color Proﬁ les See “ RGB Color-Space Profi les RGB Color-Space Profi l...

Page 89 - Camera Control Pro 2 Uninstaller; Enter the administrator name and password and click; to exit the uninstaller once Camera Control Pro has been re-

Overview Using Camera Control Pro Return to ﬁ rst page 89 Appendices Camera Control Pro 2 Uninstalling Camera Control Pro Macintosh Use an account with administrator privileges to perform the uninstall. 1 Open the “Applications : Nikon Software : Camera Control Pro 2” folder and double-click the Cam...

Page 90 - Profi les with a Gamma Value of 1.8; Profi les with a Gamma Value of 2.2

Overview Using Camera Control Pro Return to ﬁ rst page 90 Appendices Camera Control Pro 2 RGB Color Space Profi les 1/2 Profi les with a Gamma Value of 1.8 Proﬁ le Windows Macintosh Description Apple RGB NKApple.icm Nikon Apple RGB 4.0.0.3000 This proﬁ le is used in desk-top publishing applications ...

Page 92 - Device Registration

Overview Using Camera Control Pro Return to ﬁ rst page 92 Appendices Camera Control Pro 2 Device Registration If D1-series cameras are not recognized by the computer to which Camera Control Pro is installed, the camera or IEEE 1394 (FireWire) board may not be correctly regis-tered with the Windows D...

Page 93 - Registering the IEEE 1394 Interface Board; Logging On; Before Connecting the Camera; Open the Device Manager; . If the camera has been correctly registered

Overview Using Camera Control Pro Return to ﬁ rst page 93 Appendices Camera Control Pro 2 Device Registration Windows XP 1/4 Registering the IEEE 1394 Interface Board Conﬁ rm that the OHCI-compliant IEEE 1394 interface board or card has been cor-rectly registered with the system. Logging On Log on a...

Page 94 - Registering the Device Driver; Open the Device Manager; and confi rm that “Nikon 1394 Protocol Device”; reinstall the device drivers; Troubleshooting

Overview Using Camera Control Pro Return to ﬁ rst page 94 Appendices Camera Control Pro 2 Registering the Device Driver Follow the instructions below to check that the camera has been correctly regis-tered with the system. Device Registration Windows XP 2/4 1 Open the Device Manager Open the Device ...

Page 95 - Reinstalling the Device Driver; Open the “General” tab and click; Reinstall Driver...

Overview Using Camera Control Pro Return to ﬁ rst page 95 Appendices Camera Control Pro 2 Reinstalling the Device Driver If the camera is listed under “Other devices,” reinstall the device drivers as instructed below. Device Registration Windows XP 3/4 1 Double-click the listing for the camera that ...

Page 97 - Updating Drivers for the D1; you will need to

Overview Using Camera Control Pro Return to ﬁ rst page 97 Appendices Camera Control Pro 2 Registering the IEEE 1394 Interface Board Conﬁ rm that your OHCI-compliant IEEE 1394 interface board or card has been cor-rectly registered with the system. Device Registration Windows 2000 1/8 Logging On Log o...

Page 99 - Reinstall Driver

Overview Using Camera Control Pro Return to ﬁ rst page 99 Appendices Camera Control Pro 2 Device Registration Windows 2000 3/8 Reinstalling the Device Driver If the camera is listed under “Other devices,” reinstall the device drivers as instructed below. 3 Click Next . 2 Open the “General” tab and c...

Page 100 - to return to the dialog shown in Step 5 and confi rm that; and click; Select the search option and click

Overview Using Camera Control Pro Return to ﬁ rst page 100 Appendices Camera Control Pro 2 Device Registration Windows 2000 4/8 6 Click Next . If the message “Windows was unable to ﬁ nd a suitable driver for this device” is displayed, the CD was not correctly inserted or the correct search location ...

Page 102 - Updating the Device Driver; Open the “Driver” tab and click; Update Driver...; . Expand the “Nikon 1394 Device” entry and; Nikon Digital Camera D1

Overview Using Camera Control Pro Return to ﬁ rst page 102 Appendices Camera Control Pro 2 Device Registration Windows 2000 6/8 Updating the Device Driver If you are already using the D1 with Nikon View DX or Nikon Capture, you will need to update the camera drivers. 3 Click Next . 2 Open the “Drive...

Page 103 - Install one of the other drivers

Overview Using Camera Control Pro Return to ﬁ rst page 103 Appendices Camera Control Pro 2 Device Registration Windows 2000 7/8 5 Pressing the shift key to prevent the language-selection dialog from open- ing, insert the Camera Control Pro CD (if the language-selection dialog ap-pears, click Quit )....

Page 104 - Nikon Digital Camera D1 Series

Overview Using Camera Control Pro Return to ﬁ rst page 104 Appendices Camera Control Pro 2 Device Registration Windows 2000 8/8 8 Click Finish . 9 Conﬁ rm that “This device is working properly” appears under “Device status” in the “General” tab of the “Nikon Digital Camera D1 Series Properties” dia-...

Page 105 - Nikon Digital Imaging Hotline; Thank you for choosing a Nikon Digital Imaging product.

Overview Using Camera Control Pro Return to fi rst page 105 Appendices Camera Control Pro 2 Customer Support and Registration Thank you for choosing Nikon, and welcome to our family of Digital Imaging products. We are conﬁ dent your Nikon product will meet and exceed the high level of quality, relia...