Nextar ME - Manuals

7 View of Main Unit 1. POWER Button Press power button to turn on the unit or exist standby or power off mode. 2. Card Slot Insert the SD card into the slot. 3. RESET Hole Press the reset button with a metal pin to reset the system. 4. LCD Screen 5. Charge Indicator When charging the battery, it is ...

8 System Connections • Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port which allows you to connect...

9 System Connections Inserting SD Card The unit is designed with SD Card Slot which allows you to insert a SD card into the unit as shown below: To remove the card, gently press the card in with your fingernail. The card unlocks and protrudes slightly. You can now remove the card. Connecting to Earp...

10 Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering and charging its battery. 2. Plug the two-prong end of the power cord into a grounded electrical outlet. 1. Connect AC adaptor to the USB port, as shown on the right. Note: • Turn unit's power off b...

11 Power Supply Preparation Working conditions and precautions for the rechargeable battery • Battery should only be used and charged when temperatures are between 32 ° -100 ° F. • Maintain well-ventilated conditions around the product to avoid overheating. Don’t put the product on a bed, sofa or an...

12 General Setup System Main Menu In the main menu, there are four items for selecting. Touch the corresponding item to enter. Tap to enter the Navigator. Tap to enter the MP3 Player. Tap to enter the Photo Viewer. Tap to enter the Setup menu. Setup Menu In the main menu, tap to enter the Setup menu...

14 General Setup Brightness Tap in the Setup menu to enter Backlight setting menu for backlight adjusting, as shown below: Tap , to darken or increase the brightness of the display. After setting, tap to confirm or tap to cancel. Volume Tap in the Setup menu to enter Volume settings menu for volume ...

15 General Setup Align Screen Tap in the Setup menu to align the screen, as shown below. Tap the center of the cross with your finger. When the cross moves to another position, tap and hold the center of the new target. Repeat each time to complete the calibration process. When tapping the screen on...

16 Playing Music The unit is designed with SD card slot and supports MP3 and WMA format files playback. You can insert the SD card with MP3 or WMA files in the unit for music enjoyment. Note: Do not store MP3 or WWA format files in the Flash storage, for the flash storage is used to store map data, ...

19 Photo Viewer The unit is designed with SD card slot. You can insert the SD card with JPEG files. It supports JPEG format files playback. Note: Do not store JPEG format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in ...

23 Troubleshooting Take these steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because...

24 DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE TFT screen size 3.5 inches Frequency Response 20Hz ～ 20kHz Audio Signal-to-noise Rate ≥ 65dB Audio distortion or noise ≤－ 20dB (1kHz) Channel Separation ≥ 70dB (1kHz) Dynamic Range ≥ 80dB (1kHz) Power AC 100-240V ～ 50/60Hz; DC 5V Powe...