Page 2 - ii; IMPORTANT INFORMATION; Read prior to activation.; reverse the polarity of a battery; WARNING; : Use of this device may be restricted by the national
ii IMPORTANT INFORMATION Read prior to activation. You have purchased a sophisticated electronic device. To operate it properly, please read this manual fully. Ignoring operation procedures described in this manual will void your warranty. NEVER Disassemble the unit. Device contains a source of hi...
Page 3 - TABLE OF CONTENTS
1 TABLE OF CONTENTS 1. BRIEF DESCRIPTION ........................................................... 2 1.1. Overview......................................................................... 2 1.2. Key features of NVS 22-2XT ......................................... 2 2. DESIGN of NVS 22-2XT............
Page 4 - BRIEF DESCRIPTION; Overview
2 1. BRIEF DESCRIPTION 1.1. Overview NVS 22-2XT is a night vision attachment to a daytime weapon scope designed for precise aiming in darkness. The device is equipped with a high-quality electro-optical image intensifier tube that amplifies light in the visible and IR spectrum providing for up to a ...
Page 6 - IR diode
4 3. SPECIFICATIONS Optical Magnification, x 1 Field of view, degrees 8 Day Scope magnification, x : Acceptable Recommended 1-20 3-5 Focus length, mm 110 F-number 1.6 Focus range 20 m to infinity Image intensifier tube Type 18mm MCP Gain, min 25,000 Resolution, lp/mm 54-64 Infrared illuminator (opti...
Page 7 - OPERATION INSTRUCTIONS; Battery installation
5 4. DELIVERY SET NVS 22-2XT is supplied with in the following set: - Device - Objective lens cap - Rubber eyepiece guard - Picatinny rail mount - Operator’s manual (this document) - Warranty card - Soft case - AA Batteries Optional accessories: - IR illuminator - Hard Case 1 pc. 1 pc. 1 pc. 1 pc. 1...
Page 8 - Testing NVS 22-2XT in the daytime; To test the device in the daylight:; Testing NVS 22-2XT at night
6 5.2. Testing NVS 22-2XT in the daytime Daytime mode of NVS 22-2XT was designed for testing purposes only. Image may be fuzzy. To test the device in the daylight: 1. Turn switch 7 (Fig.1) into ON position. 2. Direct the device at an object within 10-20 m from the viewer. 3. Turning the focus knob 8...
Page 9 - INSTALLATION ON A RIFLE; NOTE
7 6. INSTALLATION ON A RIFLE 1) Loosen slightly the Clamp screw 11 (Fig. 1) of the adapter rail. 2) Place the NVS-22-2XT onto the Picatinny rail of the fire arm before objective of daytime scope at the minimal distance from it. 3) Tighten the fixing Clamp screws 11 (Fig. 1) NOTE : - Clamp screws may...
Page 11 - STORAGE AND MAINTENANCE; Warning; F), then prior to using the device must be warmed up at an
9 7. STORAGE AND MAINTENANCE Warning If NVS 22-2XT has been kept for a long time at temperature lower than -40 ° C (-40 ° F), then prior to using the device must be warmed up at an ambient temperature of -10 ° C (14 ° F) to +40 ° C (104 ° F) with relative humidity below 80%. NVS 22-2XT is a sophisti...
Page 13 - NEWCON; warrants this product against defects in materials and
11 9. WARRANTY NEWCON warrants this product against defects in materials and workmanship for one year from the date of the original purchase, but no more than 12 months from the date of manufacturing. Longer warranty is available, subject to the terms of the specific sales contract. Should your Newc...
Page 14 - SUPPORT; authorisation from our technical support department.; US Customers
12 10. CUSTOMER SUPPORT Should you experience any difficulties with your Newcon Optik product, please, consult this manual first. If the problem remains, contact our customer support department at +1(416) 663-6963 or toll free at 1-877-368-6666 (North America only). Our operating hours are 9am-5pm, ...
Page 15 - CERTIFICATE; Minimum
13 11. ACCEPTANCE CERTIFICATE NVS 22-2XT unit serial number: _________________________________ Image Intensifier Tube serial number: ____________________ Minimum Measured Resolution, lines/mm 45 Photocathode sensitivity, integral, μ A/lm 400 Light amplification 25,000 The unit complies with all tech...